Instrukcja obsługi Audio-Technica ES947WC/XLR

Audio-Technica mikrofon ES947WC/XLR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica ES947WC/XLR (12 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
English
User Manual
ES947C/XLR
ES947WC/XLR
Cardioid Condenser Boundary Microphone
1
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure
safety, observe all warnings and cautions while using the product.
Cautions for the product
Do not subject the product to strong impact to avoid malfunction.
Do not disassemble, modify or attempt to repair the product.
Do not handle the product with wet hands to avoid electric shock or injury.
Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.
Safety precautions
2
Do not swing or pull with the cable connected to the microphone to prevent the microphone from becoming
disconnected or damaged.
Do not wind the cable around the rack or allow the cable to become pinched.
The microphone should be placed on a flat, unobstructed mounting surface.
Placing any object on a surface (such as a conference table) before its finish is fully cured may result in damage
to the finish.
Notes on use
3
The splash-proof specification of this product applies only to the head of the microphone.
Although the product has splash-proof capabilities equivalent to IPX4, the screw part and the connector part of
the product are not splash-proof.
If the product is not installed properly, the splash-proof effect will not function properly. Firmly attach the product
to the ceiling/table using the included rubber isolators.
The splash-proof performance is designed to protect the product if it gets wet from rain, etc. (equivalent to IPX4).
JIS/IEC protection grade IPX4 means that the product is protected against exposure to flying water from all
directions.
The product cannot be used underwater.
The product cannot be used in hot and humid places, such as bathrooms.
The product is not waterproof. Putting a large amount of water on the product or submerging the product in
water may cause damage.
The product may not function properly if it becomes wet. Wipe the surface of the product with a dry cloth to
remove any moisture, and allow the product to dry thoroughly before use.
About splash-proof performance
4
Using the product
Included accessories
21
1 Rubber isolators
2 Nut
5
Using the product
How to mount the product
Table/ceiling hole size (when using isolators)
φ
23.5
(Unit: mm)
Table/ceiling hole size (when not using isolators)
φ20.5
(Unit: mm)
6
Using the product
Example: Mounting on a table
42
3
1
1
Front-of-mic indicator
2
Rubber isolators
3 Nut
4 Table
7
Using the product
Connection procedure
The output connector is an XLR-M type with polarity as shown in the figure below.
21
3
1
PIN1 (ground)
2 PIN2 (hot)
3 PIN3 (cold)
8
Dimensions
69
60.8
(Unit: mm)
26
φ
30
M20P=1


Specyfikacje produktu

Marka: Audio-Technica
Kategoria: mikrofon
Model: ES947WC/XLR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica ES947WC/XLR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon Audio-Technica

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon