Instrukcja obsługi Audac CSF506

Audac głośnik CSF506

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audac CSF506 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
PROFESSIONAL AUDIO EQUIPMENT
Fire Protected Ceiling Speaker CSF506
Installation Guide
Ceiling
Speake
r
CSF506
AUDAC
1
Installation Procedure
1) Cut a hole in the ceiling, on the desired mounting
location of the loudspeaker, with a diameter of 160
mm.
2) Remove the loudspeaker out of the firedome. The
loudspeaker is fixed in the firedome by means of
two mounting springs. It can be removed by
pulling the white front grill away from the
firedome. It will come out easily, without
performing large forces.
3) After the loudspeaker comes out the firedome, it
still will be suspended by the two springs. Release
the two springs by pressing them together. Now
the speaker can be completely removed from the
firedome.
4) Take the firefome, and release the two wing bolts
on the inner side of the firedome.
Slide the two fixing plates upwards. This allows
the firedome to be pushed inside the ceiling
hole. Before you push the firedome through the
mounting hole in the ceiling, make sure that the
speaker connection cable is provided through
the holes in the firedome.
A mounting bolt is provided on top of the
firedome. This allows to connect a steel safety
wire to the firedome. This can be used for
additional security purposes.
5) When the firedome is pushed up inside the fixing
hole , slide the two fixing plates down by means
of the wing bolts. The ceiling will be clamped
between the edge of the firedome, and the fixing
plates. After tightening the two wing bolts, the
firedome will be hold in place.
2
6) Suspend the loudspeaker on one side of the
firedome. This can be done by pressing the
mounting springs together and attach them to one
of the side brackets on the inner side of the
firedome.
7) Connect the loudspeaker connection cable to the
provided ceramic connection block. Always connect
the common to the COM connection terminal. And
depending of the desired power, the positive
amplifier output can be connected to the 6 Watt, or
3 Watt connection terminal.
8) When the connections are made, connect the second
mounting clip to the speakers firedome.
The loudspeaker will slide nicely into the firedome
by applying only a small force on the speakers grill.


Specyfikacje produktu

Marka: Audac
Kategoria: głośnik
Model: CSF506

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audac CSF506, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Audac

Audac

Audac CIRA724I Instrukcja

17 Grudnia 2024
Audac

Audac ATEO6M Instrukcja

17 Grudnia 2024
Audac

Audac CENA710D Instrukcja

9 Października 2024
Audac

Audac CIRA724 Instrukcja

9 Października 2024
Audac

Audac CIRA730D Instrukcja

9 Października 2024
Audac

Audac CENA306 Instrukcja

9 Października 2024
Audac

Audac CENA506 Instrukcja

9 Października 2024
Audac

Audac CENA510D Instrukcja

9 Października 2024
Audac

Audac CENA812 Instrukcja

9 Października 2024
Audac

Audac CIRA824 Instrukcja

9 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik