Instrukcja obsługi Atlas Sound FAP42T

Atlas Sound głośnik FAP42T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas Sound FAP42T (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

AtlasSound.com 1/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Strategy Series® II 4" Loudspeaker System

FAP42T

Speciﬁcations

Woofer Size 4" (102mm)

Power Handling 25 Watts

Transformer Taps at 70.7V 1, 2, 4, 8, & 16 Watts & 8 BypassΩ

Sensitivity (1W / 1M) 88dB Average

Frequency Response 75Hz – 20kHz (±7dB)

Magnet Weight 10oz (364g)

Cut-Out Diameter 9" (229mm)

Height 87⁄8" (225mm)

Diameter 101⁄2" (267mm)

Woofer 4" Poly Cone with Butyl Rubber Surround

HF Driver Coaxially Mounted PEI Dome Tweeter

Features

• Extendedlowfrequencyresponsefromthe285in

3 optimally tuned

and ported deep drawn, galvanized steel enclosure

• EasyinstallationindroptileorsheetrockceilingsviaC-Ring/V-Rail

tile bridge and "Dog Leg" mounting system (Included)

• Frontmountedtapselectorswitchforeasysystemtuningadjust-

ments includes transformer bypass setting for 8 / direct coupled Ω

operation

• Unique"trapdoor"inputsectionallowsforthroughconduitrunswith

rigid or flex conduit

• 4PoledetachablePhoenixstyle/Euroconnectorallowseasypre-

wiring and is convenient for daisy chaining additional Strategy Series

full range speakers or subwoofers

• “Pressfit”grillesblendbetterintocontemporaryarchitecture

• Enhancedquality70.7V/100Vinternaltransformersminimizeinser-

tion loss and maintan low frequency response while providing

increased output for higher SPL applications

• UL1480Listed

Applications

FAP42T combines superior coaxial loudspeaker performance with

wide dispersion and easy installation. A low profile enclosure and wide

coverage make the FAP42T a perfect choice for low ceilings. The FAP42T

will satisfy the needs of owners, architects, contractors, and consultants

by delivering true, high fidelity sound reproduction in an attractive and

easy-to-install system. The FAP42T is ideal for high-intelligibility voice,

music, and signal reproduction in commercial, industrial, and institutional

applications.

FAP42T

AtlasSound.com 2/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

General Description

The FAP42T's 130˚ dispersion angle effectively reduces the number of

loudspeakers necessary to achieve coverage in distributed systems with

low ceilings.

The loudspeaker component matches the performance of the legendary

Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone

typedriverincludesa1”voicecoilandpolypropyleneconewithabutyl

rubber surround. The 19mm coaxially mounted tweeter is constructed

of PEI. A high sensitivity level means less power may be required to

achieve the desired SPL. This loudspeaker is factory assembled in an

optimally tuned & ported deep drawn enclosure and includes a specially

designed 16 Watt low saturation 70.7V / 100V transformer. A convenient

front mounted selector switch allows tap selection without the need to

remove the speaker from the ceiling. This switch also includes a trans-

former bypass setting for 8 direct coupled operation.Ω

Mounting Accessories

MountingissimplifiedwithStrategystyle“DogLeg”tabsthatallow

easy installation into drop tile or drywall ceilings with provided tile bridge

assembly.Thetilebridgeconsistsoftwo“V”shapedformedmounting

rails and a C-Ring assembly. The C-Ring can be attached to the rails with

the screws provided to extend support to the T-Bar grid in suspended

ceiling applications. Multiple hole locations are provided to allow the

C-Ring to be positioned to the outer edge the tile if necessary.

For existing dry-wall applications the tile bridge C-Ring and support rails

can be inserted into the hole cut for the FAP42T. For easy positioning the

“V”shapedsupportrailsmatchtheshapeoftheC-Ringtabsforeasy

maneuveringandlocationwhenworking“blindly”abovethedeck

Auniquelydesigned“easyaccess”inputpanelonthesideoftheenclo-

sureallowsfor“thru”conduitrunsusingflexibleorrigidconduit.Below

this cover resides a detachable Phoenix style locking four-pole connec-

tor which provides for easy daisy chain wiring to other full range 70.7V

loudspeakersorAtlasSoundFASUBsubwoofer.Thepackageincludesan

attractive press-fit grille which nicely matches contemporary architecture.

For new construction drywall ceiling applications, the optional FAP42-TR

trim ring is available. This unit provides a marked location for drywall

installers to cut around essentially reserving the desired location in the

ceiling until final installation of FAP42T. Mounting holes are provided to

accommodate16"or24"OCstud/joistmounting.

A support ring is also provided on the top of the FAP42T enclosure to

facilitate an auxiliary support cable.

NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT

BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC

CONSIDERATIONS).

Architect & Engineer Speciﬁcations

System shall include a high performance 4" coaxial loudspeaker,

ported bass reflex enclosure and press-fit grille for conventional ceiling

installation.

Frequency response for the system shall be 75Hz – 20kHz (±7dB).

Sensitivity shall be 88dB average. Loudspeaker shall be comprised of a 4"

coaxial cone driver constructed of polypropylene with a butyl rubber sur-

round. The 19mm tweeter shall be constructed of PEI. Magnet shall be a

minimumof10oz.(264g)andthevoicecoildiametershallbe1”(25mm).

Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt pri-

mary taps (@70.7V) with a front mounted tap selector switch to include a

transformer bypass setting for 8 / direct coupled operation.Ω

Enclosure shall be a deep drawn steel enclosure design. Internal volume

shall be 285 in3. To facilitate connection in conduit systems, enclosure

shall be equipped with an access panel covering a recessed terminal cup.

This cover shall provide a combination 3⁄4" (19mm inside diameter) / 1"

(25mm inside diameter) knock-out on the side access and a top access

compression fitting / strain relief to facilitate flexible conduit up to 22mm

outside diameter or 1 in (25mm inside diameter) conduit when the com-

pression fitting is removed.

External wiring shall be accomplished via a removable lockable wiring

connector with screw-down terminals to provide both secure wire termi-

nation and pre-wiring capability before loudspeaker installation. The 4-pole

locking connector shall facilitate in / out connections and shall be located

in the recessed area behind the conduit access panel.

Seismic support eye shall be provided on top of enclosure for addi-

tional suspension point when used in drop tile ceilings. Construction of

enclosure shall be a minimum of 18-gauge, deep drawn galvanized metal.

The system shall include a support backing plate to reinforce the ceil-

ing material and tile support rails for use on either 2' x 4' (609mm x

1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This

assembly can all be installed from beneath the ceiling tile.

Overall front face diameter shall not exceed 10

1⁄2" (267mm); overall depth

from the bottom of the ceiling shall not exceed 87⁄8" (225mm). Grilles shall

be press-fit, manufactured from 24-gauge perforated steel mesh and fin-

ished in white epoxy. Round grille shall be 8

7⁄16" (214mm) diameter.

The loudspeaker shall be the Atlas Sound FAP42T.

C-Ring / V-Rails

FAP42-TR

AtlasSound.com 3/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Specyfikacje produktu

Marka:	Atlas Sound
Kategoria:	głośnik
Model:	FAP42T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlas Sound FAP42T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Atlas Sound

Atlas Sound IP-SDM Instrukcja

23 Września 2024

Atlas Sound M1000-W Instrukcja

22 Września 2024

Atlas Sound PM8GD-B Instrukcja

22 Września 2024

Atlas Sound SMA-15 Instrukcja

22 Września 2024

Atlas Sound GD87W Instrukcja

22 Września 2024

Atlas Sound DT22 Instrukcja

22 Września 2024

Atlas Sound All Weather SM63T Instrukcja

22 Września 2024

Atlas Sound PM8SUB Instrukcja

22 Września 2024

Atlas Sound AP-30 Instrukcja

22 Września 2024

Atlas Sound FA138 Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Yamaha DZR10-D Instrukcja

11 Grudnia 2024

Yamaha DZR15-D Instrukcja

11 Grudnia 2024

Yamaha DXS15XLF-D Instrukcja

11 Grudnia 2024

Yamaha NS-2000A Instrukcja

11 Grudnia 2024

Bogen WMT1AS Instrukcja

11 Grudnia 2024

Ruark Audio Sabre-R Instrukcja

11 Grudnia 2024

Antelope R4S Instrukcja

11 Grudnia 2024

Antelope Atlas i8 Instrukcja

11 Grudnia 2024

MB PESSPROVS62A Instrukcja

11 Grudnia 2024

MB PESSPROVS32A Instrukcja

11 Grudnia 2024