Instrukcja obsługi Atlas Sound AP-30TC

Atlas Sound głośnik AP-30TC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas Sound AP-30TC (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
AtlasSound.com 1/2
AP-30/AP-30T(C)/AP-30T-25
Omni-Purpose® 30 Watt Horn Loudspeakers
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003854 RevA 5/10
Specifications
Models AP-30, AP-30T(C), AP-30T-25
Power Rating 30 Watts Continuous
Frequency Response 300 - 12,000 Hz (Nominal)
500 Hz - 4500 Hz (±5dB)
Sensitivity 126dB at 30 Watts (Peak)
121dB at 30 Watts/1 Meter (Avg) 500 - 4500 Hz
108dB at 1 Watt/1 Meter (Avg) 500 - 4500 Hz
Dispersion Angle 60˚ (-6dB, 2000 Hz Octave Band)
Weight AP-30: 4.5 lbs (2.0kgs)
AP-30T: 5 lbs (2.3kgs)
AP-30T-25: 5 lbs (2.3kgs)
Finish Baked Epoxy
Dimensions H 11" x W 10" x D 101⁄ "2
Temperature Range -40˚C - 70˚C
Architect and Engineer Specifications
Loudspeakers shall be Atlas Sound Model ____________ (AP-30 or,
AP-30T(C), or AP-30T-25) or approved equal. Each loudspeaker shall be
equipped with an integral compression driver within waterproof housing.
The loudspeaker unit shall be constructed of structural aluminum with
double re-entrant acoustic path and exponentially-flared outer bell.
Power handling capability shall be 30 Watts continuous. Frequency
response range shall be 300-12,000 Hz (nominal), 500-4500 Hz (+5dB).
Sound pressure level shall be 121dB (30W/1M), 108dB (1W/1M). Sound
dispersion angle shall be 60˚. Model AP-30 shall have voice coil impedance
of 8 Ohms. Models AP-30T and AP-30T(C) shall have impedance selection
of 2500, 1300, 666, 333, 167, 89, 45 Ohms for 25, 70.7, or 100V line.
Power taps shall be available at .9, 1.8, 3.7, 7.5 and 15 watts for 25V
line; 2, 3.8, 7.5, 15 and 30 watts for 70V line; 4, 7.7, 15 and 30 Watts
for 100V line. Model AP-30T-25 shall have selection of 500, 250, 125,
83, 42, 21 Ohms for 25V line. Power taps shall be available at 1.2, 2.5,
5, 7.5, 15, 30 Watts. Loudspeaker shall be furnished with mounting
bracket allowing adjustment on the vertical and horizontal planes and shall
include provisions for surface or strap mounting. Wiring terminals shall be
enclosed. Units shall be weatherproof and constructed of metal and ABS
plastic. Finish shall be grey or beige (C) baked epoxy as indicated.
Di men sions shall be H 11" x W 10" x D 101⁄ ".2
Features
• Superior Intelligibility for Voice and Tone Signaling
• Wide Frequency Response for Optimum Sound Quality
• Environment Resistant for Outdoor and Indoor Use
• Omni-Purpose
® Bracket for Precise Positioning
• Choice of 8 Ohm or Transformer (T) Equipped Models for Versatile
25, 70.7, or 100V Line Applications
• U.S. Trademark Design is World Recognized for Quality and Dependability
• Available in Grey or Beige (C) Finish
Applications
All-purpose, environment resistant 30-Watt AP-30 Series loudspeakers
provide cost effective high-intelligibility voice and signal transmission
for high power indoor and outdoor public address, intercom, security,
alarm, or industrial signal systems. Units incorporate high-efficiency
compression drivers to project through high ambient sound levels,
over long distances and in wide open areas with fewer loudspeakers.
The AP-30 Series is renowned in the industry as the “professional
standard” for applications such as commercial buildings, distribution
centers, industrial warehouses, institutions, civic centers, and
recreational facilities.
Description
The 8 Ohm Model AP-30 and transformer-equipped Models AP-30T and
AP-30T-25 are double re-entrant loudspeakers which deliver 30 Watts
of continuous power handling, superior intelligibility and unparalleled
audio conversion-efficiency. The AP-30 Series operates within a
nominal frequency range of 300-12,000 Hz and offers a sensitivity of
126dB at rated power to provide clear voice and signal communication.
Models AP-30T and AP-30T-25 each feature an integral transformer to
meet a variety of distributed system needs. The AP-30T is equipped
with a versatile, 3-way, 25, 70.7, 100V line transformer, while Model
AP-30T-25 includes a 25V only line transformer. Transformers are
adjustable using Atlas Sound’s exclusive Vari-Tap
® Connect Center which
features a 7-position, watts/impedance selection switch. The labor saving
Vari-Tap® terminal is screwdriver adjustable and includes a protective
cover with built-in strain relief.
The trademarked square bell design signifies Atlas Sound quality and
reliability. The Omni-Purpose® mounting bracket (included on all models)
allows precise positioning in the vertical and horizontal planes with a
single adjustment and provides for installation of the loudspeaker on
conventional surfaces or by strap-mounting to I-beams or pillars. AP
Series loudspeakers are U.S. made to assure superior service reliability.
Weather-resistant construction is metal and matching ABS plastic with
metal components finished in grey epoxy (standard) or beige epoxy if
suffixed with (C) where noted.
Accessories
BX-1A Vandal resistant cover plate for armored cable
and conduit connection. Constructed of cast
aluminum.
APXB-G/APXB-N Optional mounting base for a standard 1-gang,
2-gang, or 4" sq. E.O. box. (G-Grey or N-Neutral)
AP-30 Series
AtlasSound.com 2/2
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003854 RevA 5/10
AP-30(T) Frequency Response
AP-30 (Impedance Sweep)
* Do Not Use
AP-30(T) (Harmonic Distortion - 1.5 watts @ 1 meter)
Polars Are Normalized To Zero On Axis
Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete
analog Bruel & Kjaer measurement equipment and Techron® TEF 20® audio analyzer. Atlas Sound is proud to be a beta site for TEF software.
Mounting FlangeBell
Dimensions
DRIVER PROTECTION: The horn loudspeaker should not be operated at
frequencies outside the specified range, especially below horn cut-off. It is
suggested that any program material be high-passed at 300 Hz with a 6dB per
octave filter. This can be done by a low level filter at the amplifier input or by
a series capacitor at each loudspeaker. Electrolytic capacitors can be used but
they must be non-polarized (See Typical Capacitor Values Chart).
9/32" Dia.
3 Holes 120°
Apart, On 2.312
Bolt Circle
1-3/4"
2"
10"
10"
1/2" Banding Slot
2-7/8" Dia.
Frequency
(Hz)
Q Di Beamwidth
(Degrees)
500 3.09 4.89 160
1000 7.33 8.65 100
2000 17.84 12.51 60
4000 35.02 15.44 35
8000 48.15 16.83 35
Typical Capacitor Values
8 Ohm Driver 25 Volt Line 70 Volt Line 100 Volt Line
70 mfd 30 mfd 4 mfd 2 mfd
AP-15T Vari-Tap® Control Connect Center
Xfmr. Power Taps
AP-30T-25
Xfmr. Power Taps
Switch
Position
Impedance
(Ohms)
Watts
@ 25V
Watts
@ 70.7V
Watts
@ 100V
Impedance
(Ohms)
Watts
@ 25V
1 2500 – 2 4 500 1.2
2 1300 – 3.8 7.7 250 2.5
3 666 .09 7.5 15 125 5
4 333 1.8 15 30 83 7.5
5 167 3.7 30 X* 42 15
6 89 7.5 X* X* 21 30
7 45 15 X* X* – –
Frequency (Hz)
Fundamental
2nd Harmonic
3rd Harmonic
MAGNITUDE (dB)
30 watts @1 meter
1 watt @ 1 meter
MAGNITUDE (dB)
Frequency (Hz)
Impedance Amplitude
OHMS
Frequency (Hz)
Dimensions

Specyfikacje produktu

Marka: Atlas Sound
Kategoria: głośnik
Model: AP-30TC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlas Sound AP-30TC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Instrukcja

23 Września 2024
Atlas Sound

Atlas Sound M1000-W Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound PM8GD-B Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound SMA-15 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound GD87W Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound DT22 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound All Weather SM63T Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound PM8SUB Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound AP-30 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound FA138 Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024