Instrukcja obsługi Atlas Sound AP-15T

Atlas Sound głośnik AP-15T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas Sound AP-15T (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
1/1
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004340 RevA 5/12
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
MOUNTING
The speaker is provided with a 3-way omni-directional adjustable mounting bracket. The wing nut and the lock
pin allow 360˚ rotation and 130˚ vertical movement. Additional adjustment is provided between the bracket
and speaker by means of the 1⁄4" bolt. For ease of installation, the base can be separated from the speaker by
removing the 1⁄4" wing nut and locking pin.
CONNECTION
Audio source line-connection is made to the screw terminals. To insure reliability, these special terminals are
designed with wire retainers. Phasing is indicated throughout the communications system and attained by
maintaining polarity utilizing the numbers “1” & “2” cast into the speaker housing. 1= Common 2= Positive.
IMPEDANCE SWITCH SETTING
The AP-15T, APC-30T, APR-30T and APT-34T (70.7V and 25V line ) have a built-in, 7-position switch. The
AP-30T (70.7V line) and AP-30T-25 (25V line) have a built in 6 position switch. Both weather-sealed switches
select impedance or wattage taps. The slot in the shaft without the flat indicates the switch setting in use.
Desired wattage or impedance can be obtained by referring to the following table.
AP-15T, AP-30T, APC-30T, APR-30T
Omni-Purpose Loudspeakers
AP-15T AP-30T AP-30T-25 APC-30T, APR-30T, APT-34T
Switch 70.7V 25V 70.7V 25V 70.7V 25V
Position Watts Watts Ohms Watts Ohms Watts Ohms Watts Watts Ohms
1 0.9 - 5000 1.2 4000 1.2 500 1.8 - 2500
2 1.8 - 2500 2.5 2000 2.5 250 3.7 - 1300
3 3.8 0.48 1300 5.0 1000 5.0 125 7.5 - 666
4 7.5 0.94 666 7.5 666 7.5 83 15.0 1.8 333
5 15.0 1.8 333 15.0 333 15.00 42 30.0 3.7 167
6 - 7.5 89 30.0 167 30.0 21 - 7.0 89
7 - 15.0 45 - - - - - 15.0 45
ACCESSORIES:
Conduit/cable adapters Model BX-1A for AP-30 Models.
BX-2A for AP-15 Models & BX-3A for APF Models - Specially designed covers for conduit and armored cable connect directly into the speaker.
These accessories provide additional protection to the speaker wires, and the cover assures tamper-proof installation and vandalism-protection.
Speaker Connections and
Tap Selector
BX2ABX3A
AtlasSound.com 1/2
AP-15/AP-15T(C)
Omni-Purpose® 15 Watt Horn Loudspeakers
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003852 RevA 5/10
Specifications
Models AP-15, AP-15T(C)
Power Rating 15 Watts Continuous
Frequency Response 400 - 14,000 Hz (Nominal)
500 Hz - 6000 Hz (±5dB)
Sensitivity 120dB at 15 Watts (Peak)
116dB at 15 Watts/1 Meter (Avg) 500 - 6000 Hz
106dB at 1 Watt/1 Meter (Avg) 500 - 6000 Hz
Dispersion Angle 70˚ (-6dB, 2000 Hz Octave Band)
Weight AP-15: 3.5 lbs (1.6kgs)
AP-15T: 4 lbs (1.8kgs)
Finish Baked Epoxy
Dimensions H 83⁄4" x W 77⁄8" x D 95⁄ "16
Temperature Range -40˚C - 70˚C
Architect and Engineer Specifications
Loudspeakers shall be Atlas Sound Model __________ (AP-15, AP-15C,
AP-15T, AP-15TC) or approved equal. Each loudspeaker unit shall be
supplied with integral compression driver and shall be constructed of
structural aluminum and ABS plastic with double re-entrant acoustic path
and exponentially-flared square bell. The weather-resistant unit shall have
a continuous audio power rating of 15 watts. Frequency response range
shall be 400-14,000 Hz (Nominal), 500-6000 Hz (+5dB). Sound pressure
level shall be 116dB (15W/1M), 106dB (1W/1M). Sound dispersion shall
be 70 degrees (-6dB, 2000 Hz octave band). Mounting bracket shall allow
vertical and horizontal adjustment and include provisions for surface
mounting, banding or strapping. Loudspeaker shall have impedance
selection, via seven-position switch of 5000, 2500, 1300, 666, 333, 89
and 45 ohms. Power taps shall be available at .48, .94, 1.8, 7.5, and
15 watts for 25V line, 1, 2, 3.8, 7.5, and 15 watts for 70.7V line and 2,
4, 8 and 15 watts for 100V line. Wiring terminals shall be enclosed for
security and weather protection. Finish shall be grey or beige (C) baked
epoxy as indicated. Dimensions shall be H 83⁄4" x W 77⁄8" x D 95⁄ ".16
Features
UÊ -Õ«iÀÀÊÌi}LÌÞÊvÀÊ6ViÊ>`Ê/iÊ-}>}
UÊ }vvViVÞÊÀÛiÀÊÜÌÊ*ÀÛiÊ*iÀvÀ>ViÊ,i>LÌÞ
UÊ /À>ÃvÀiÀÊ/®ÊµÕ««i`Ê6iÀÃÊvÀÊ6iÀÃ>ÌiÊÓx]ÊÇä°Ç]ÊÀÊ£ää6Ê
Line Applications
UÊ "*ÕÀ«Ãi
® Bracket for Precise Positioning
UÊ ÛÀiÌÊ,iÃÃÌ>ÌÊvÀÊ"ÕÌ`ÀÊ>`Ê`ÀÊ1Ãi
UÊ 1°-°Ê/À>`i>ÀÊiÃ}ÊÃÊ7À`Ê,iV}âi`ÊvÀÊ+Õ>ÌÞÊ>`Êi«i`>LÌÞ
UÊ Û>>LiÊÊÀiÞÊÀÊi}iÊ®ÊÃ
Applications
AP-15 and AP-15T environment-resistant loudspeakers are the world
standard for high-intelligibility voice and signal transmission in medium-
power indoor and outdoor public address, intercom, security and
industrial-signal-system applications. Cost effective, 15-watt units
incorporate high-efficiency compression drivers to project sound over
long distances or wide areas with fewer loudspeakers. The AP-15 Series
is recognized throughout the world as “the performance standard” for
ViÀV>ÊÃÕ`]ÊÌiÀVÊ>`Ê«ÀÌiVÌÛiÃ}>}ÊÃÞÃÌiðÊ1ÌÃÊ
are commonly installed in commercial buildings, distribution centers,
factories, schools, public access areas, civic centers and recreational
facilities.
Description
The 8 Ohm Model AP-15 and the transformer-equipped Model AP-15T
are double re-entrant loudspeakers which deliver 15 Watts of continuous
power handling, superior intelligibility and unparalleled efficiency. The
AP-15 Series operates within a nominal frequency response range of
400-14,000 Hz and offers a sensitivity of 120dB at rated power to provide
clear voice and signal communication.
Transformer-equipped Model AP-15T includes a versatile, 3-way, 25, 70.7,
100V line transformer to meet a variety of distributed system needs. The
transformer is adjustable using Atlas Sound’s exclusive Vari-Tap
® Connect
Center which features a 7-position, watts/impedance selection switch.
The labor-saving Vari-Tap® switch is screwdriver adjustable and includes a
protective cover with built-in cable strain relief.
The trademarked squared-bell design signifies Atlas Sound quality and
reliability. The Omni-Purpose® mounting bracket (supplied on all models)
achieves precise positioning in the vertical and horizontal planes with a
single adjustment and includes provisions for loudspeaker installation
ÊVÛiÌ>ÊÃÕÀv>ViÃÊ>ÃÊÜiÊ>ÃÊvÀÊÃÌÀ>«ÕÌ}ÊÊLi>ÃÊÀÊ
«>ÀðÊ*Ê-iÀiÃÊÕ`ëi>iÀÃÊ>ÀiÊ1°-°Ê>`iÊÌÊ>ÃÃÕÀiÊÃÕ«iÀÀÊÃiÀÛViÊ
reliability. Weather-resistant construction is metal and matching ABS
plastic with metal components finished in grey epoxy (standard) or beige
epoxy (Model AP-15TC).
The AP-15 Series also includes a 45-ohm Model AP-15-45 and a 4 ohm
Model AP-15-4 which are designed respectively for intercom and
CB/auxiliary radio applications. (See SL2-1567).
Accessories
BX-2A Vandal resistant cover plate for armored cable
and conduit connection. Constructed of cast
aluminum.
AP-15 Series

Specyfikacje produktu

Marka: Atlas Sound
Kategoria: głośnik
Model: AP-15T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlas Sound AP-15T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Instrukcja

23 Września 2024
Atlas Sound

Atlas Sound M1000-W Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound PM8GD-B Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound SMA-15 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound GD87W Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound DT22 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound All Weather SM63T Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound PM8SUB Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound AP-30 Instrukcja

22 Września 2024
Atlas Sound

Atlas Sound FA138 Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024