Instrukcja obsługi Asrock P55 Extreme4

Asrock Moederbord P55 Extreme4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Asrock P55 Extreme4 (15 stron) w kategorii Moederbord. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/15
1
Guide to SATA Hard Disks
Installation and RAID Configuration
1. Guide to SATA Hard Disks Installation ............................ 2
1.1 Serial ATA (SATA) Hard Disks Installation ............... 2
2. Guide to RAID Configurations ......................................... 3
2.1 Introduction of RAID ............................................... 3
2.2 RAID Configuration Precautions ............................ 5
2.3 Installing Windows® 7 / 7 64-bit / VistaTM /
VistaTM 64-bit / XP / XP 64-bit With RAID Functions 6
2.4 Setting the BIOS RAID Items ................................ 11
2.5 Configuring the Intel RAID BIOS ........................... 11
2.6 Deleting RAID Volume .......................................... 15
2
1. Guide to SATA Hard Disks Installation
1.1 Serial ATA (SATA) Hard Disks Installation
Intel P55 chipset supports Serial ATA (SATA) hard disks with RAID
functions, including RAID 0, RAID 1, RAID 10, RAID 5, and Intel
Rapid Storage. Please read the RAID configurations in this guide
carefully according to the Intel southbridge chipset that your
motherboard adopts. You may install SATA hard disks on this
motherboard for internal storage devices. For SATA installation
guide, please refer to Serial ATA (SATA) Hard Disks Installation of
“User Manual” in the support CD. This section will guide you how to
create RAID on SATA ports.
3
2. Guide to RAID Configurations
2.1 Introduction of RAID
This motherboard adopts Intel southbridge chipset that integrates
RAID controller supporting RAID 0 / RAID 1/ Intel Rapid Storage /
RAID 10 / RAID 5 function with four independent Serial ATA
(SATA) channels. This section will introduce the basic knowledge
of RAID, and the guide to configure RAID 0 / RAID 1/ Intel Rapid
Storage / RAID 10 / RAID 5 settings.
RAID
The term “RAID” stands for “Redundant Array of Independent
Disks”, which is a method combining two or more hard disk drives
into one logical unit. For optimal performance, please install
identical drives of the same model and capacity when creating a
RAID set.
RAID 0 (Data Striping)
RAID 0 is called data striping that optimizes two identical hard disk
drives to read and write data in parallel, interleaved stacks. It will
improve data access and storage since it will double the data
transfer rate of a single disk alone while the two hard disks
perform the same work as a single drive but at a sustained data
transfer rate.
WARNING!!
Although RAID 0 function can improve the access performance, it
does not provide any fault tolerance. Hot-Plug any HDDs of the
RAID 0 Disk will cause data damage or data loss.
RAID 1 (Data Mirroring)
RAID 1 is called data mirroring that copies and maintains an
identical image of data from one drive to a second drive. It
provides data protection and increases fault tolerance to the
entire system since the disk array management software will
direct all applications to the surviving drive as it contains a
complete copy of the data in the other drive if one drive fails.

Specyfikacje produktu

Marka: Asrock
Kategoria: Moederbord
Model: P55 Extreme4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Asrock P55 Extreme4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą