Instrukcja obsługi Argon Bass 12

Argon głośnik Bass 12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Argon Bass 12 (5 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
www.argonaudio.com 1
BASS 12 & 15
01 OWNER’S MANUAL
04 ILLUSTRATIONS
05 SPECIFICATIONS
05 TROUBLESHOOT
Owner ’s manual
Dear Customer,
Quality has always been our driving force and
founding Argon Audio is a natural extension of
this philosophy.
We have 20 years’ experience in creating and
specifying high quality products,
manufacturing them and selling them on to
end users with Value-for-Money as the
primary aim. And Argon Audio is a brand fully
compliant with these values.
Design, features and quality standards are all
specified in Denmark and manufacturing takes
place in the Far East, where quality vendors
are highly competitive - and as a result supply
outstanding Value-for-Money products
– to the delight of both ourselves and our
customers!
Introduction
Thank you for choosing Argon Audio
Subwoofer, we hope it will bring you many
years of enjoyment.
Please read this manual fully before
unpacking and installing the product.
Argon BASS 12/15 is manufactures with a no-
nonsense approach. BASS 12/15 is without
any unnecessary gimmicks, bling bling or
fancy features. The money is spent on quality
components, efficient woofer driver and
extremely solid cabinet. Quality features you
only see on products twice the price of an
Argon BASS 12/15.
Unpacking
We have during production and packing
carefully checked and inspected this
Subwoofer.
After unpacking please check for any damage
from transport. We recommend that you keep
the original carton box and packing material
for any future shipping.
www.argonaudio.com 2
BASS 12 & 15
Subwoofer installation
The Subwoofer requires connection to the
mains power supply, so for your safety it is
important that you read both this manual and
the amplifier manual before connecting.
Subwoofer positioning
Variations in placement of loudspeakers can
produce dramatic differences in the way music
sounds. No listening room is the same and
therefore we encourage you to spend some
time experimenting with which placements
work best in your listening room. Positioning
of Subwoofers is however less critical
compared with full-range loudspeakers
because the low frequencies reproduced by a
subwoofer can be difficult to locate in the
room. You can start with our basic
recommendations.
To begin with, if you use the Subwoofer in a
surround set-up, the Subwoofer should ideally
be positioned between the TV and one of your
front loudspeakers, as fig. 2 to 4 on page 5. If
you are using the Subwoofer in a stereo set-
up the Subwoofer should ideally be positioned
between the two front stereo speakers, as
fig.1on page 5.
You should know that, if the Subwoofer is
placed close to a wall or in a corner, the bass
sound will be enhanced.
It’s your choice what you like the most.
Another example is the placement of the
Subwoofer in the middle of the stereo
speakers or away from the center of the
stereo speakers.
This may have an impact on how you perceive
the stereo image, even though its only low
frequency sounds that come from the
Subwoofer.
Trust your ears and be willing to experiment
freely.
(Almost) everything is possible
Running-in period
We recommend a running-in time of your new
BASS 12/15 Subwoofer of approximately 15-
20 hours at normal listening
level before you decide on the final positioning
and control settings of the Subwoofer. During
the running-in time the drive units will settle in
and perform as intended.
Connecting your Subwoofer
We recommend that you read the manual of
your Amplifier or AV-receiver carefully before
connecting your Subwoofer.
First switch off the Amplifier and all equipment
before you connect the Subwoofer.
Connect your Amplifier/av-reciever’s
SUB-OUT or PRE-OUT to either INPUT
right/left (1 or 2) as shown on page 4.
If you use a Stereo Amplifier it’s
recommended to use the INPUT right/left
connections (1) as shown on page 4.
If you use a AV receiver with a SUB out it’s
recommended to use the LFE connection (2)
on page 4.
When finished, connect the subwoofer power
cable (9) as shown on page 4 to the mains
voltage, and push the POWER ON/OFF
button (10) as shown on page 4 to ON
position, the indicator lamp POWER LED will
now glow blue and the Subwoofer is active
and ready to be used.
The Argon BASS 12/15 Subwoofer has a
built-in AUTO STANDBY function ( 9) as
shown on page 4 and after approximately 20
minutes, without any input signal, the
subwoofer will automatically switch off, and
the indicator lamp POWER LED will change
color. When an input signal is detected the
subwoofer will become active and the
indicator lamp POWER LED will glow blue.
Setting volume, frequency and phase
The volume, crossover and phase (controls 4,
5 and 7) as shown on page 4, can be adjusted
on the rear panel, and we recommend that
you adjust the setting of these controls to your
liking – try with different music and films.
www.argonaudio.com 3
BASS 12 & 15
Care and cleaning
We don’t recommend use of any solvents or
cleaners on Argon BASS12/15 cabinet, the
cabinet surface usually only requires dusting
or cleaning with a damp soft cloth (only use
cold clean water).
The grille fabric may be cleaned with a normal
clothes brush or vacuumed carefully with the
grille detached from the cabinet. Avoid
touching the drive unit, and do not use the
Subwoofer as a coffee or drinks table (risk of
water being spilled into the subwoofer).
Disconnect the Subwoofer from the mains
supply if taken out of use for a longer period.
Environmental information
Argon BASS12/15 Subwoofer complies with
international directives on the Restriction of
Hazardous Substances Electrical and
Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the
products must be appropriately recycled or
processed in accordance with these
directives. (RoHS) in electrical and electronic
equipment and the disposal of Waste.
Safety instructions
Please store this instruction manual for future
reference.
Do not use this product near water or
moisture. Clean only with a dry cloth. Unplug
this product from the wall outlet before
cleaning. Place the unit on a solid surface. Do
not block any ventilation openings. Do not put
it in a closed bookcase or a cabinet that may
keep air from flowing through its ventilation
openings. Do not install near any heat
sources, such as radiators, heat registers,
stoves or other appliances that produce heat.
Protect the power cord from being walked on
or pinched, particularly at plugs and the point
where they exit from the product. Servicing is
required when the product has been
damaged. Do not attempt to service this
product yourself. Opening or removing covers
may expose you to dangerous voltages or
other hazards.
Please contact the manufacturer to be
referred to an authorized service center near
you. To prevent risk of fire or electric shock,
avoid over loading wall outlets, extension
cords, or integral convenience receptacles.
Do not let objects or liquids enter the product.
Use proper power sources. Plug the product
into a proper power source, as described in
the operation instructions or as marked on the
product.
Rear panel and connections
01 Right/left Sound input from source or
stereo amplifier.
02 LFE is for connecting a surround sound
amplifier/receiver. (Crossover frequency is
not adjustable).
03 Link connection is for connecting an extra
subwoofer.
04 Subwoofer Volume adjustment.
05 Cross-over / Frequency adjustment.
06 Power On/Off indicator.
07 Phase adjustment.
08 Power mode setting switch
Off: SUB is turned off,
Auto: SUB is in auto standby/start up.
SUB will power up once Music starts
playing, and SUB will turn off automatically
if there is no Music.
ON: the SUB will remain power on
continuously.
09 Power cable connection.
The power cable should be pulled from
socket if not used for a longer period.
10 Main power switch
See illustration on page 4 for explanation

Specyfikacje produktu

Marka: Argon
Kategoria: głośnik
Model: Bass 12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Argon Bass 12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Argon

Argon

Argon Fenris A55 Instrukcja

14 Września 2024
Argon

Argon Forte A55 MK2 Instrukcja

11 Września 2024
Argon

Argon Octave 4A Instrukcja

4 Lipca 2024
Argon

Argon Alto 55 Instrukcja

3 Lipca 2024
Argon

Argon Alto A4 Instrukcja

3 Lipca 2024
Argon

Argon FORTE A4 Instrukcja

3 Lipca 2024
Argon

Argon Octave 5 Instrukcja

3 Lipca 2024
Argon

Argon 6340A Instrukcja

2 Lipca 2024
Argon

Argon Bass 12 Instrukcja

2 Lipca 2024
Argon

Argon 6350 Instrukcja

2 Lipca 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024