Instrukcja obsługi Argon 6340A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Argon 6340A (11 stron) w kategorii Luidspreker. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
w w w . a r g o n a u d i o . c o m 1
6340A
02 OWNER’S MANUAL
04 ILLUSTRATIONS
10 SPECIFICATIONS
10 TROUBLESHOOT
w w w . a r g o n a u d i o . c o m 2
6340A
Owner’s manual
Dear Customer,
Quality has always been our driving force and founding
Argon Audio is a natural extension of this philosophy.
We have 20 years’ experience in creating and specifying
high quality products, manufacturing them and selling them
on to end users with Value Money as the primary aim. -for-
And Argon Audio is a brand fully compliant with these
values.
Design, features and quality standards are all specified in
Denmark and manufacturing takes place in the Far East,
where quality vendors are highly competitive and as a -
result supply outstanding Value Money p- -for roducts
to the delight of both ourselves and our customers!
Introduction
Thank you for choosing Argon Audio loudspeakers, we
hope they will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Unpacking
We have during production and packing carefully checked
and inspected these loudspeakers.
After unpacking please check for any damage from
transport.
We recommend that you keep the original carton box and
packing material for any future shipping.
Loudspeaker installation
The speakers are best used with the tweeters
approximately at ear level when seated.
Loudspeaker positioning
Variations in placement of your loudspeakers can produce
dramatic differences in the way music sounds. No listening
r oom is the same and therefore we encourage you to spend
some time experimenting with which placements work best
in your listening room. Trust your ears and be willing to
experiment freely , you can not ruin anything.
You can start with our basic recommendations.
Please try to ensure that the room’s surroundings of each
loudspeaker left and right are similar in acoustic character.
For example, if one loudspeaker is placed on bare walls
while the other is placed close to soft furniture’s and
curtains, both the overall sound quality and the stereo
image are likely to be compromised.
Because bookshelves are usually located close to the wall
placement on bookshelves will often provide a richer, more
full-bodied sound. In other words; you will get more Bass.
On the other hand, if you place the speakers free-standing
You will get less Bass but a clearer sound.
T o begin with, the speakers should be positioned between
1.5 m and 3 m apart at two corners of an equilateral
triangle, completed by the listening area at the third corner.
This is the optimal way of placement.
The Argon is designed to play single standing, if the 6340A -
room is not too big.
In bigger rooms a subwoofer will need to be added in order
to get optimal sound.
w w w . a r g o n a u d i o . c o m 3
6340A
Running-in period
We recommend a running in time of your new Argon 6340A-
loudspeakers of approximately 15 20 hours at normal-
listening level before you decide on the final positioning of
the loudspeakers. During the running in time the drive units -
will settle in and perform as intended.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or -AV receiver carefully before connecting your
loudspeakers. This only in case you will use 6340A with an
amplifier. Please switch off all equipment when connecting
your loudspeakers.
The binding posts on the terminal accepts wire up to Ø
4mm or cables with banana plugs.
Make sure that positive terminal binding posts on the
Passive speaker colored (marked + and red) are connected
to the posit output terminal binding posts on the ive Active
speaker and that the negative terminals on the Passive
speaker (marked – and colored black) are connected to the
negative output terminal on the Active speaker .
Now you can connect the audio source you want.
(read more about this on page 4 and forward).
.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Argon 6340A cabinets, the cabinet surface usually only
requires dusting or cleaning with a damp soft cloth
(only use cold clean water).
The grille fabric may be cleaned with a normal clothes brush
or vacuumed carefully with the grille detached from the
cabinet. Avoid touching the drive units, especially the
t weeter, as damage may result.
Environmental information
Argon 6340 loudspeakers comply with international A
directives on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and the
disposal of Waste.
Electrical and Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the products must
be appropriately recycled or processed in accordance with
these directives.
Safety instructions
Please store this instruction manual for future reference.
Do not use this product near water or moisture. Clean only
with a dry cloth. Unplug this product from the wall outlet
before cleaning. Place the unit on a solid surface. Do not
block any ventilation openings. Do not put it in a closed
bookcase or a cabinet that may keep air from flowing
through its ventilation openings. Do not install near any heat
sources, such as radiators, heat registers, stoves or other
appliances that produce heat. Protect the power cord from
being walked on or pinched, particularly at plugs and the
point where they exit from the product. Servicing is required
when the product has been damaged. Do not attempt to
service this product yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
Please contact the manufacturer to be referred to an
authorized service center near you. To prevent risk of fire or
electric shock, avoid over loading wall outlets, extension
cords, or i . Do not let ntegral convenience receptacles
objects or liquids enter the product. Use proper power
sources. Plug the product into a proper power source, as
described in the operating instructions or as marked on the
product.

Specyfikacje produktu

Marka: Argon
Kategoria: Luidspreker
Model: 6340A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Argon 6340A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Luidspreker Argon

Instrukcje Luidspreker

Najnowsze instrukcje dla Luidspreker

Scansonic

Scansonic S6 Instrukcja

18 Września 2024
Trust

Trust Asto soundbar Instrukcja

16 Września 2024
Teufel

Teufel CL 302 FCR Instrukcja

16 Września 2024
Bowers Wilkins

Bowers Wilkins P4 Instrukcja

16 Września 2024
Bowers Wilkins

Bowers Wilkins CASA Instrukcja

16 Września 2024
Bowers Wilkins

Bowers Wilkins 2004 Instrukcja

15 Września 2024
Dyon

Dyon Area S Instrukcja

14 Września 2024
Lamax

Lamax Sentinel 2 Instrukcja

14 Września 2024