Instrukcja obsługi Argoclima Rock
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Argoclima Rock (6 stron) w kategorii Heater. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
7
V 05/13
OPERATING INSTRUCTIONS
Read the instructions carefully before installing and operating the appliance or performing
maintenance operations. Observe all the safety instructions; failure to observe the instructions may
cause accidents and/or damages. Store these instructions for future reference.
CERAMIC FAN HEATER AND AIR PURIFIER
EN
8
V 05/13
GENERAL SAFETY INFORMATION
Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock or injury to people.
Ensure that the mains power complies with the voltage specified on the fan heater ’s data plate (220-240V~/50Hz).
This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or
without the necessary experience and knowledge, unless they have been adequately supervised and instructed
concerning use of the appliance by a person responsible for their safety.
Do not restrict the air inlet and outlet grilles.
The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.
Ensure that all objects are at least 1 meter from the front and sides of the appliance.
Disconnect the mains power when the appliance is not used or for cleaning operations.
Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in workshops or
garages) or paint vapours.
Do not place anything on the appliance, use the appliance to dry clothing.
Use the appliance in a well-ventilated area.
Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may
damage the appliance.
To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.
Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced
by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.
Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical
personnel to examine the appliance or perform any electrical or mechanical repairs.
The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
To disconnect the fan heater, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid
pulling on the cord when disconnecting the fan heater.
Do not place any objects on the cord and do not bend it.
It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension
cord to operate multiple appliances.
Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
Do not touch the plug with wet hands.
Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.
The symbol below signals the above warning:
The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable
material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE MATERIALS.
Do not connect the appliance to the mains power before it has been properly assembled and positioned.
Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally pulled-out.
Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.
Do not position the fan heater below a socket outlet.
Do not operate the appliance outdoors.
WARNING: do not use the fan heater with a controller or any other external device that activates the appliance
automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.
Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating
up of the internal heating elements, and should not recur later on.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING
POWER. WHEN SERVICING OR MOVING THE FAN HEATER, ALWAYS UNPLUG THE POWER CORD.
A fan heater has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such as
flammable, explosive, chemical-laden or wet atmosphere.
Do not place the fan heater on soft surfaces, like a bed, where openings may become blocked. Always place the fan
heater on a stable, flat, level surface when operating, to avoid the chance of the fan heater overturning. Locate the
power cord so the fan heater or other objects are not resting on it.
Always unplug the fan heater when not in use. In order to avoid accidents turn unit off if unattended.
In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not
attempt to repair it and take it to your local after sales service.
9
V 05/13
DESCRIPTION OF PARTS
1. Control panel
2. Liquid crystal display
3. Air delivery grille
4. Handle
5. Base
6. Intake grille
7. On/off button
8. UV lamp
9. Ion emission
FRONT VIEW REAR VIEW
HOW TO USE THE FAN HEATER
Position the unit on a flat, stable surface.
Connect the power cord to a suitable electric socket (220-240V~50Hz).
When you move the appliance, use the handle.
On/off button (on the rear, above the intake grille)
Bring the on/off button to the “I” position. When the appliance emits a beep this means that the fan heater is ready for use.
Bring the button to the “0” position to switch off the fan heater.
LED DISPLAY
ECO mode LED:
1000 W reduced power to save
energy
COMFORT mode LED:
maximum heating power
(
2000W
)
Swinging
display
1
2
3
4
5
6
7
8
9
Ionization
display
Remote control
receiver
UV lamp display
Room temperature
/
timer on setting
Temperature display: room
temperature display/ room
temperature setting
°C
hou
r
Time
r
display:
Timer display/setting
Specyfikacje produktu
Marka: | Argoclima |
Kategoria: | Heater |
Model: | Rock |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Argoclima Rock, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Heater Argoclima
21 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
5 Lipca 2024
5 Lipca 2024
Instrukcje Heater
- Heater DeLonghi
- Heater AEG
- Heater Xiaomi
- Heater Tefal
- Heater Livoo
- Heater SilverCrest
- Heater Bosch
- Heater Candy
- Heater Nobo
- Heater Midea
- Heater Infiniton
- Heater Nedis
- Heater Stanley
- Heater Black & Decker
- Heater Adler
- Heater Rinnai
- Heater Hendi
- Heater Domo
- Heater Ardes
- Heater Taurus
- Heater Orbegozo
- Heater Stadler Form
- Heater Einhell
- Heater Jocel
- Heater Hyundai
- Heater Bimar
- Heater Rowenta
- Heater Mesko
- Heater Honeywell
- Heater ECG
- Heater Unold
- Heater Truma
- Heater Dyson
- Heater Zelmer
- Heater Wilfa
- Heater Eureka
- Heater Bomann
- Heater DEDRA
- Heater Emerio
- Heater MPM
- Heater Emos
- Heater Corbero
- Heater Ravanson
- Heater Perel
- Heater Fagor
- Heater GoldAir
- Heater Trotec
- Heater Thomson
- Heater Trumatic
- Heater Izzy
- Heater Klarstein
- Heater Güde
- Heater Cecotec
- Heater JANDY
- Heater Camry
- Heater Steba
- Heater Lenoxx
- Heater Qlima
- Heater Scarlett
- Heater Nevir
- Heater TriStar
- Heater Dimplex
- Heater Harvia
- Heater Baxi
- Heater Lavorwash
- Heater Brandson
- Heater Vornado
- Heater G3 Ferrari
- Heater Westfalia
- Heater Hayward
- Heater Remko
- Heater Clatronic
- Heater SVAN
- Heater Ariete
- Heater Princess
- Heater Carson
- Heater Innoliving
- Heater Olympia
- Heater Heller
- Heater Mora
- Heater Kenmore
- Heater VOX
- Heater Pelgrim
- Heater Solis
- Heater Orion
- Heater Blumfeldt
- Heater Vonroc
- Heater Powerfix
- Heater Kalorik
- Heater Suntec
- Heater Kunft
- Heater Grunkel
- Heater Zibro
- Heater Becken
- Heater Masport
- Heater Guzzanti
- Heater Sygonix
- Heater Cotech
- Heater Eurom
- Heater PRIME3
- Heater Sogo
- Heater Lasko
- Heater Swan
- Heater Alpina
- Heater Argo
- Heater Sinbo
- Heater EWT
- Heater Mellerware
- Heater Nestor Martin
- Heater Stiebel Eltron
- Heater Real Flame
- Heater Evolar
- Heater Zibro Kamin
- Heater Air King
- Heater Royal Sovereign
- Heater King
- Heater Maxwell
- Heater Piazzetta
- Heater Heylo
- Heater Kent
- Heater CasaFan
- Heater Olimpia Splendid
- Heater Wamsler
- Heater Duux
- Heater Imetec
- Heater Topcraft
- Heater Blaze
- Heater Primo
- Heater Dovre
- Heater Creda
- Heater Konig
- Heater Plieger
- Heater Zehnder
- Heater Fantini Cosmi
- Heater CaterChef
- Heater Dantherm
- Heater Brixton
- Heater Superior
- Heater La Nordica
- Heater Jotul
- Heater HQ
- Heater Vasco
- Heater Nectre
- Heater PAX
- Heater Jaga
- Heater Extraflame
- Heater Just Fire
- Heater Hartig And Helling
- Heater Heatstrip
- Heater Escea
- Heater Kogan
- Heater Braemar
- Heater Bromic Heating
- Heater Jindara
- Heater Hatco
- Heater SunRed
- Heater XPower
- Heater WestBend
- Heater Prem-i-air
- Heater Quadra-Fire
- Heater VIESTA
- Heater Brivis
- Heater Hubbell
- Heater Pacific Energy
- Heater Dri Eaz
- Heater Regency
- Heater Burley
- Heater Invroheat
- Heater Noirot
- Heater Gossmann
Najnowsze instrukcje dla Heater
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024