Instrukcja obsługi Argo Over


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Argo Over (9 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
10V 03/14
LOCAL AIR CONDITIONER
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance work.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or
damage. Keep these instructions in a safe place for future reference .
EN
11V 03/14
GENERAL OPERATING AND SAFETY INSTRUCTIONS
This appliance is a portable air-conditioner, designed for domestic use.
Only use this air-conditioner as described in this manual.
Ensure that the required voltage and frequency (220-240V/50Hz) match the available power supply.
Ensure that the electricity system is able to deliver the operating current needed by the air-conditioner in addition to that
normally absorbed by other appliances (electrical appliances, lighting, etc.). Please refer to the maximum absorption data
given on the air-conditioner data plate.
Connection to the electricity supply must take place in accordance with current installation standards.
Ensure that the automatic switches and system protection valves are able to withstand a start-up current of 7A (normally
for less than 1 second).
The system socket must always be grounded.
Make sure the plug is inserted properly. Do not use multiple sockets. Do not touch the plug with wet hands. Make sure
the plug is clean.
Do not use the plug to start/stop the air-conditioner: use the power button on the remote control or on the control panel.
Do not install the air-conditioner in rooms that may be subject to water sprays (e.g. laundries).
This appliance is not suitable for people (including children) with reduced physical, sensory or mental abilities, unless
they are adequately supervised by a person responsible for their safety.
Before moving or cleaning, ensure that the device is unplugged from the socket.
Do not move the air-conditioner while it move any conde is operating; first turn the appliance off, check and re nsation that
may have formed.
To turn the appliance off, set the remote control to OFF and remove the plug from the socket. Only pull on the plug. Do
not pull the cord.
Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced
by the service centre in order to avoid any safety risks.
PRECAUTION!
Do not insert any objects into the air-conditioner: this is very dangerous as the fan turns very quickly.
Ensure that air circulates freely around the unit. Do not cover the air intake and delivery grilles with drapes or in
any way.
WARNING!
The air-conditioner must be positioned at least 50 cm from the wall and any other obstacles, on a firm, flat surface to
avoid water leaks.
The air-conditioner is fitted with a system to protect the compressor from overload. This means that the
compressor only starts once 3.5 minutes have passed from its previous stop.
Please wait at least 3.5 minutes before starting the unit. This helps prevent the compressor from being damaged.
WARNING!
In the event of an anomaly, switch the appliance off and unplug from the socket. Do not dismantle or attempt to
repair or modify the product. In the event of a malfunction, contact the after-sales service centre directly.
WARNING!
Do not expose the air-conditioner to direct sunlight, as the colour of the materials may change and if the
appliance overheats this may activate the protection mechanism, causing it to switch off.
Do not use insecticides, oils, detergents or spray paints near the appliance; do not use aggressive chemical
detergents to clean the casing: this may damage the finish and colour.
Close all open windows to maximise air-conditioning efficiency.
The manufacturer will not be held liable if safety and accident prevention rules are not observed.
12V 03/14
INSTRUCTIONS TO REMOVE THE PACKAGING
1. Place the unit in the correct upright position before
unpacking.
2. Cut the two packing straps.
3. Slide the carton upwards and remove the product
from the base.
4. Pull from the bottom of the package, the flexible
hose, the terminal connector (divided in two parts a
and b) and the connector with the magnet to be
placed on the unit to connect the hose.
5. Install the exhaust hose on the unit before
operating the unit in Cooling mode.
DESCRIPTION OF THE APPLIANCE
FRONT VIEW
1. Upper air filter
2. Cold air inlet
3. Bottom air filter
4. Hot air inlet
5. Horizontal motorized flaps
SIDE VIEW
6. Upper air filter
7. Cold air inlet
8. Condensate drain hole (Dehumidification)
9. Bottom air filter
10. Hot air inlet
REAR VIEW
11. Control panel
(button for
operation without
remote control)
12. Cool and/or dehumidified air outlet
13. Hot air outlet
14. Connector with hooks and magnet to be placed on
the unit, on the hot air outlet.
15. Air expulsion hose
16. Terminal connector
(a+b)
17. Small door (to be
kept open in Cooling mode, to be closed in
Dehumidification mode only).
18. Condensate drain hole (Cooling)
Operation limits: min/max. (indoor temperature):
Cooling: 17°C D.B. - 13°C W.B./ 32°C D.B. – 23° W.B.
Dehumidifying: 5°C D.B./32°C D.B


Specyfikacje produktu

Marka: Argo
Kategoria: klimatyzacja
Model: Over

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Argo Over, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje klimatyzacja Argo

Argo

Argo Oscar Instrukcja

22 Września 2024
Argo

Argo Ecolight 18000 Instrukcja

22 Września 2024
Argo

Argo ULISSE HLA Instrukcja

16 Września 2024
Argo

Argo Ulisse 10-13 A Instrukcja

16 Września 2024
Argo

Argo Denver Instrukcja

4 Września 2024
Argo

Argo Milton Instrukcja

4 Września 2024
Argo

Argo ADAK Instrukcja

2 Września 2024

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja