Instrukcja obsługi APC SMX48RMBP2US

APC Niesklasyfikowane SMX48RMBP2US

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC SMX48RMBP2US (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Installation Smart-UPS
External Battery Pack SMX48RMBP2U
Inventory
Specifications
Operating Conditions
This unit is intended for indoor use only. Select a location sturdy enough to support the weight of the
uninterruptible power supply (UPS), and the external battery pack (XLBP).
Do not operate the unit where there is excessive dust, or the temperature or humidity are outside the specified
limits.
This unit has front and rear air vents. Allow adequate space for proper ventilation.
Environmental Specifications
Environmental factors impact battery life. High temperatures, poor utility power, and frequent, short duration
discharges will shorten battery life.
For additional specifications, see the APC by Schneider Electric Web site at www.apc.com.
(1)
(1)
(4)
(4)
(1)
(2)
(4)
(4)
(1 pair) rails for
rack-mount installation
(1 pair) rack-mount brackets
(2)
Two Stabilizer brackets are included with the UPS.
(2)
Spacers to be used with the stabilizer brackets.
Temperature
Operating 0° to 40° C (32° to 10 F)
Storage -15° to 4 C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity 0% to 95% relative humidity, non-condensing
Smart-UPS External Battery Pack SMX48RMBP2U2
Installation
• The UPS can support up to five XLBPs.
• Always install the XLBPs at the bottom of the rack with the UPS installed above the XLBPs.
• Connect all battery strings. Failure to do so may cause equipment damage.
Rack-mount to tower conversion
Two post rack
Front rack-mount
Center rack-mount
1 2 3
4 5
12
2
2
22
3
1 2
su0716 a
s
u0305a
s
u
0
0
4
4
9
a
su 0 44 8a
su0454a
su0356a
su0455a
su0456a
su0457a
Smart-UPS External Battery Pack SMX48RMBP2U 3
Four post rack
Use the APC Four-Post Rail Kit.
Install the bezel and rotate the logo if necessary
Connect the External Battery Packs
An optional battery extension cable is available from APC by Schneider Electric, see www.apc.com.
1 2
su0440a
su0459a
su0461a
s
u0462a
s
u0462a


Specyfikacje produktu

Marka: APC
Kategoria: Niesklasyfikowane
Model: SMX48RMBP2US

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC SMX48RMBP2US, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane APC

APC

APC SYNX-980214 Instrukcja

11 Grudnia 2024
APC

APC SYNX-3573406 Instrukcja

11 Grudnia 2024
APC

APC FS-AC-8002-U Instrukcja

15 Października 2024
APC

APC EVP1000 Instrukcja

14 Października 2024
APC

APC Switched Rack PDU Instrukcja

9 Października 2024
APC

APC C2C Instrukcja

9 Października 2024
APC

APC AP7868 Instrukcja

9 Października 2024
APC

APC P8VNTG Instrukcja

9 Października 2024
APC

APC P62 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane