Instrukcja obsługi APC G35TEFBXR6

APC Niesklasyfikowane G35TEFBXR6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC G35TEFBXR6 (40 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
Galaxy 3500
10-40 kVA 380/400/415 V and
10-30 kVA 208/220 V
Operation
04/2016
www.schneider-electric.com
Legal Information
The Schneider Electric brand and any registered trademarks of Schneider Electric
Industries SAS referred to in this guide are the sole property of Schneider Electric
SA and its subsidiaries. They may not be used for any purpose without the owner's
permission, given in writing. This guide and its content are protected, within the
meaning of the French intellectual property code (Code de la propriété
intellectuelle français, referred to hereafter as "the Code"), under the laws of
copyright covering texts, drawings and models, as well as by trademark law. You
agree not to reproduce, other than for your own personal, noncommercial use as
defined in the Code, all or part of this guide on any medium whatsoever without
Schneider Electric's permission, given in writing. You also agree not to establish
any hypertext links to this guide or its content. Schneider Electric does not grant
any right or license for the personal and noncommercial use of the guide or its
content, except for a non-exclusive license to consult it on an "as is" basis, at your
own risk. All other rights are reserved.
Electrical equipment should be installed, operated, serviced, and maintained only
by qualified personnel. No responsibility is assumed by Schneider Electric for any
consequences arising out of the use of this material.
As standards, specifications, and designs change from time to time, please ask for
confirmation of the information given in this publication.
10-40 kVA 380/400/415 V and 10-30 kVA
208/220 V
Table of Contents
Important Safety Instructions — SAVE THESE
INSTRUCTIONS .........................................................................................5
FCC Statement ..........................................................................................6
Safety Precautions .....................................................................................6
Overview ......................................................................................................7
Display Interface.........................................................................................7
Operate the Display Interface ......................................................................8
Menu Tree .................................................................................................8
User Interface ..........................................................................................10
Operation ................................................................................................... 11
Modes ..................................................................................................... 11
Normal Operation ............................................................................... 11
Battery Operation................................................................................ 11
Internal Bypass Operation .................................................................. 11
External Maintenance Bypass Operation .............................................. 11
Optional Parallel Operation.................................................................. 11
Single System without External Bypass Panel ............................................ 11
Turn into Internal Bypass Operation from Normal Operation................... 11
Turn into Normal Operation from Internal Bypass Operation...................13
Perform a Total Power Off....................................................................14
Perform a Restart ............................................................................... 15
Single System with External Bypass Panel .................................................15
Turn into External Maintenance Bypass................................................15
Turn into Normal Operation from External Maintenance Bypass .............16
Perform a Total Power Off....................................................................17
Perform a Restart ............................................................................... 17
Parallel System ........................................................................................18
Turn into External Maintenance Bypass................................................18
Turn into Normal Operation from External Maintenance Bypass .............19
Perform a Total Power Off....................................................................19
Perform a Restart ............................................................................... 20
Isolate One UPS in a Parallel System ...................................................20
Turn the Isolated UPS into Normal Operation ........................................21
Single and Parallel Systems ......................................................................21
Turn Load Off/On via the Display Interface............................................21
Turn Load Off – Disconnect the UPS Output to the Load
Equipment..........................................................................................21
Turn Load On – Connect the UPS Output to the Load Equipment ........... 22
View the Status Screens......................................................................22
View Log ............................................................................................23
View Statistics ....................................................................................24
View Diagnostics ................................................................................24
Configuration .............................................................................................25
Change the Clock, the Alarm Thresholds, and the Dust Filter Status .............25
Set the Clock............................................................................................ 25
Set the Dust Filter Settings ........................................................................ 26
Reset Dust Filter Surveillance..............................................................27
990–2386F-001 3

Specyfikacje produktu

Marka: APC
Kategoria: Niesklasyfikowane
Model: G35TEFBXR6

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC G35TEFBXR6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane APC

APC

APC SYNX-980214 Instrukcja

11 Grudnia 2024
APC

APC SYNX-3573406 Instrukcja

11 Grudnia 2024
APC

APC SBP3000RMHW Instrukcja

5 Grudnia 2024
APC

APC FS-AC-8002-U Instrukcja

15 Października 2024
APC

APC EVP1000 Instrukcja

14 Października 2024
APC

APC Switched Rack PDU Instrukcja

9 Października 2024
APC

APC C2C Instrukcja

9 Października 2024
APC

APC AP7868 Instrukcja

9 Października 2024
APC

APC P8VNTG Instrukcja

9 Października 2024
APC

APC P62 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025