Instrukcja obsługi APC ACRD600P


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC ACRD600P (72 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/72
InRow® Direct Expansion Air Conditioners
InRow® DX
ACRD600, ACRD601, ACRD602, ACRD600P,
ACRD601P, ACRD602P
Operation and Maintenance Manual
990-5712D-001
Publication Date: July 2021
www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and
furnished for informational use only. No part of this guide may be reproduced or
transmitted in any form or by any means (electronic, mechanical, photocopying,
recording, or otherwise), for any purpose, without the prior written permission of
Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide
or its content, except for a non-exclusive and personal license to consult it on an "as
is" basis. Schneider Electric products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
ACRD600, ACRD601, ACRD602, ACRD600P, ACRD601P,
ACRD602P
Table of Contents
Safety............................................................................................................7
Important Safety Information .......................................................................7
Safety Notices During Operation..................................................................8
General Information..................................................................................10
Overview .................................................................................................10
Save These Instructions ......................................................................10
Cross-Reference Symbol Used in This Manual......................................10
Manual Updates ................................................................................. 10
Equipment Disposal.................................................................................. 11
Waste Electrical and Electronic Equipment (WEEE) Disposal................. 11
Environmental Considerations ................................................................... 11
Commissioning..........................................................................................12
Inspection Checklists ................................................................................ 12
Initial Inspection Checklist ...................................................................12
Electrical Inspection Checklist ...................................................................13
Mechanical Inspection Checklist ................................................................14
Display Interface Inspection Checklist ........................................................15
Start-Up Inspection Checklist ....................................................................15
Final Inspection Checklist..........................................................................16
Charging with Refrigerant..........................................................................17
Calculating R410A Charge ..................................................................17
Charging the Equipment......................................................................18
Compressor Oil Charge ............................................................................22
Oil Charging Procedure .......................................................................22
Operation ...................................................................................................24
Display Interface.......................................................................................24
Alarm LED.......................................................................................... 24
Status LED.........................................................................................25
Link-RX/TX (10/100) LED ....................................................................25
Using the Display......................................................................................26
Overview Screen ................................................................................26
Main Menu Screen..............................................................................26
Display Controls .................................................................................27
Using the Path Statement....................................................................27
Calibrating the Display ........................................................................27
Logging In/Password Entry ..................................................................28
Start the Cooling Unit ..........................................................................29
Stop the Cooling Unit ..........................................................................29
General Configuration..............................................................................30
Cooling Unit Configuration.........................................................................30
Configure the Unit...............................................................................30
Contacts ............................................................................................31
Identify the Cooling Unit ......................................................................31
Unit Role Override ..............................................................................31
Cooling Group Configuration .....................................................................31
Configure the Cooling Group ...............................................................32
Configure Modbus ..............................................................................32
990-5712D-001 3


Specyfikacje produktu

Marka: APC
Kategoria: Niesklasyfikowane
Model: ACRD600P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC ACRD600P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane APC

APC

APC FS-AC-8002-U Instrukcja

15 Października 2024
APC

APC EVP1000 Instrukcja

14 Października 2024
APC

APC Switched Rack PDU Instrukcja

9 Października 2024
APC

APC C2C Instrukcja

9 Października 2024
APC

APC AP7868 Instrukcja

9 Października 2024
APC

APC P8VNTG Instrukcja

9 Października 2024
APC

APC P62 Instrukcja

9 Października 2024
APC

APC AP7898 Instrukcja

9 Października 2024
APC

APC SBP6KRMI2U Instrukcja

7 Października 2024
APC

APC W0M-7054 Instrukcja

7 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024