Instrukcja obsługi APC ACAC75017

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC ACAC75017 (8 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Installation Sheet 990-6247-001 -Release Date: 03/2020
ACAC75016 and ACAC75017—Low Temperature Kit
The low temperature kit provided by Schneider Electric includes a pressure relief
valve on the liquid receiver vessel. If the low temperature kit is not installed, then
Schneider Electric recommends the installation of a pressure relief valve on the
discharge pipe near the condenser. The pressure relief valve selection and
installation is the responsibility of the installer and shall comply with local
authorities.
Install Kit Inventory
EMEA-PED Versions (ACAC75017)
na5835a
Item Description Quantity Item Description Quantity
Ball valve, 7/8 in. (inlet) 1 Tie wrap, 1 1/4 in. (not
used)
11
Ball valve, 5/8 in. (outlet)
(not used)
1 Bolt, M6 (not used) 16
Head pressure valve
and check valve
1 Washer flat, M6 (not
used)
16
Safety valve (PED) 1 Hose clamp 2
NAM-ASME Versions (ACAC75016)
na5836a
Item Description Quantity Item Description Quantity
Ball valve, 7/8 in. (inlet) 1 Bolt, 1/4 in. (not used) 2
Ball valve, 5/8 in. (outlet)
(not used)
1 Nut, M10 (not used) 4
Head pressure valve
and check valve
1 Bolt, M10 (not used) 4
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison -
France
+ 33 (0) 1 41 29 70 00
www.schneider-electric.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© 2020 – 2019 . All rightsSchneider Electric
reserved.
ACAC75016 and ACAC75017—Low Temperature Kit Unpacking
Item Description Quantity Item Description Quantity
Safety valve (ASME) 1 Washer flat, M10 (not
used)
4
Washer flat, 1/4 in. (not
used)
2 Hose clamp 2
Unpacking
EMEA-PED Versions (ACAC75017)
1. Remove plywood top and sides from the pallet.
na5817a
2. Remove the valve box (contains safety valve, ball valve, head pressure valve,
and check valve).
3. Remove brackets.
na5818a
VALVE BOX
BRACKET
4. Remove receiver kit.
na5819a
M6X50 HEX HEAD SCREW
M6 WASHER
M6 WASHER
M6 NUT
2 990-6247-001
Unpacking ACAC75016 and ACAC75017—Low Temperature Kit
NAM-ASME Versions (ACAC75016)
1. Remove plywood top and sides from the pallet.
na5825a
2. Remove the valve box (contains safety valve, ball valve, head pressure valve,
and check valve).
3. Remove brackets.
4. Remove receiver kit.
na5827a
M6X50 HEX HEAD SCREW
M6 WASHER
M6 WASHER
M6 NUT
990-6247-001 3

Specyfikacje produktu

Marka: APC
Kategoria: Niet gecategoriseerd
Model: ACAC75017

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC ACAC75017, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd APC

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd