Instrukcja obsługi Apart CM6T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Apart CM6T (1 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
COLOUR KLEUR COULEUR POWER IMPEDANCE
Black Zwart Noir Common
RED ROOD ROUGE 1.5 Watt 6.66 KΩ
GREEN GROEN VERT 3 Watt 3.33 KΩ
BROWN BRUIN BRUN 6 Watt 1.66 KΩ
• Type : 2 - Way HiFi
• Woofer : 6.5” Enforced Polypropylen
• Tweeter : 1” Silk Dome
• Rated Power RMS : 6 W / 100Volt
• Music Power RMS : 10 W / 100Volt
• Rated Power RMS : 40 W / 16Ω
• Music Power RMS : 60 W / 16Ω
• Sound Pres. Level (SPL) 1W/1M : 92dB
• Frequency range : 60 Hz - 20 kHz
• Trafo Power Tappings : 6 - 3 - 1.5W
• Dispersion @ 1-4-8 KHz : 180°- 80° - 45°
• Dimensions outside Ø : 205MM
• Dimensions Cutout Ø : 183MM
• Depth : 80MM
• Weight : 1.6Kg
The APart CM6T 2-way built-in loudspeaker can be
used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use,
you can connect up to 4 loudspeakers in parallel on each channel of a
standard 4 Ohm amplier. For 100 use, the CM6T is equipped with a high-
quality 6 Watt 100 Volt transformer with several power tappings. Therefore
it can be used with high ceilings or places where more back ground noise
is present. The loudspeaker has a 6 ½” enforced Polypropylen woofer what
results in a very low distortion. To complete the sound a 1” tweeter has been
integrated. It makes the CM6T very suitable for the distribution of microphone
calls and back ground music. The housing is made of high quality ABS.
The woofer is made out of enforced polypropylen, what makes it moisture-
proof. The standard colour is white. From 12 pieces on, the loudspeakers
can be painted optionally in any other RAL colour
6 6 6 3 3 3 1.5 1.5++ + + + + +30 Watt =
40Watt Amplier
Amplier power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.
16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω
4Ω 4Ω
Disconnect 100Volt transformer
16 ohm connection
The loudspeaker is easy to install,
due to its simple, quick mounting system
3 screws which are hidden behind the loud-
speaker grill, what gives the loudspeaker a
modern and striking design.
Cutout Ø : 183 MM
Remove the grill before mounting.
You can see four Philips head screws.
Use these screws to thigthen the dog-ears.
Picture shown is the CMS20T


Specyfikacje produktu

Marka: Apart
Kategoria: głośnik
Model: CM6T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Apart CM6T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Apart

Apart

Apart SMB6VP Instrukcja

8 Grudnia 2024
Apart

Apart SMB6V Instrukcja

8 Grudnia 2024
Apart

Apart SMB6 Instrukcja

8 Grudnia 2024
Apart

Apart CM1008 Instrukcja

8 Grudnia 2024
Apart

Apart CM5EH Instrukcja

3 Października 2024
Apart

Apart OVO5 Instrukcja

2 Października 2024
Apart

Apart CM6TSMF Instrukcja

1 Października 2024
Apart

Apart COLW41 Instrukcja

30 Września 2024
Apart

Apart SDQ8T-BL Instrukcja

19 Września 2024
Apart

Apart CM20T Instrukcja

15 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik