Instrukcja obsługi AOC e943Swn

AOC monitor e943Swn

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AOC e943Swn (65 stron) w kategorii monitor. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/65

Safety........................................................................................................................................................................4

National Conventions.........................................................................................................................................4

Power ................................................................................................................................................................5

Installation..........................................................................................................................................................6

Cleaning ............................................................................................................................................................7

Other..................................................................................................................................................................8

Setup ........................................................................................................................................................................9

Contents in Box .................................................................................................................................................9

Setup Stand & Base.........................................................................................................................................10

Adjusting Viewing Angle................................................................................................................................... 11

Connecting the Monitor....................................................................................................................................12

Wall Mounting ..................................................................................................................................................13

Adjusting .................................................................................................................................................................14

Setting Optimal Resolution ..............................................................................................................................14

Windows Vista ..........................................................................................................................................14

Windows XP .............................................................................................................................................16

Windows ME/2000....................................................................................................................................17

Hotkeys............................................................................................................................................................18

OSD Setting.....................................................................................................................................................19

Luminance ................................................................................................................................................20

Image Setup .............................................................................................................................................22

Color Temperature....................................................................................................................................24

Color Boost...............................................................................................................................................26

Picture Boost ............................................................................................................................................28

OSD Setup ...............................................................................................................................................30

Extra .........................................................................................................................................................32

Reset ........................................................................................................................................................34

Exit ........................................................................................................................................................... 36

LED Indicator...................................................................................................................................................37

Driver ......................................................................................................................................................................38

Monitor Driver ..................................................................................................................................................38

Windows 7 ................................................................................................................................................38

Windows Vista ..........................................................................................................................................42

Windows XP .............................................................................................................................................44

Windows 2000 ..........................................................................................................................................47

Windows ME.............................................................................................................................................47

i-Menu..............................................................................................................................................................48

Troubleshoot...........................................................................................................................................................51

Specification............................................................................................................................................................53

General Specification.......................................................................................................................................53

Preset Display Modes......................................................................................................................................54

Pin Assignments ..............................................................................................................................................55

Plug and Play...................................................................................................................................................56

Regulation...............................................................................................................................................................57

FCC Notice ......................................................................................................................................................5

WEEE Declaration ...........................................................................................................................................58

e-saver .............................................................................................................................................................. 49

Screen+ ............................................................................................................................................................. 50

HG Declaration ................................................................................................................................................58

EPEAT Declaration ..........................................................................................................................................59

Service....................................................................................................................................................................60

Warranty Statement for Europe........................................................................................................................60

Warranty Statement for North & South America (excluding Brazil) ...........................................................62

Warranty Statement for AP .......................................................................................................................64

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to

avoid the problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem.

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the

specific presentation of the warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure

of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

will fit only into a grounded power outlet as a safety f accommodate the three-wire eature. If your outlet does not

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat

the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect

the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

configured receptacles marked between 100 - 240V AC, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for

monitors with power adapter).

Manufacturers:

1) TPV ELECTRONICS(FUJIAN) CO., LTD model :

ADPC1236

HONOR ELECTRONIC CO., LTD model : ADS- NP-12-1 120 G 24 24

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on

the stand:

Cleaning

Clean the cabinet regularly with the cloth provided. You can use soft-detergent to wipe out the stain, instead

of strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough

as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and

contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Not all signal cables (Analog, USB, and HDMI cables) will be provided for all countries and regions. Please

check with the local dealer or AOC branch office for confirmation.

Adaptor

QSG CD Manual

Power Cable Analog Cable

Setup Stand & Base

Please setup the base following the steps as below.

Setup:

1. Place surfacemonitoronthefirm (suchas,table) 

2. Useyour thehands to hold monitorbase 

3. Useyourhands to foldthemonitorbaseasfigureinstructedabovebyswitch

safetylocktotherightside

4. Oncethe the (caution:monitorbasebegin to foldyoucanrelease safetylock 

you youmusthear“click”after fold basethemonitor  to standingposition to

ensure lock locksafety is  properly.)

5. Placethe standingmonitorunitin  



Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your

own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

You are able to adjust the monitor's angle from - ° to 1 °. 5 8

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

-518

Connecting the Monitor

Cable Connections On Back of Monitor and Computer:

Power

D-SUB

To protect equipment, always turn off the PC and LCD monitor before connecting.

1 Connect the power cable to the AC port on the back of the monitor.

2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the

computer's D-Sub port.

3 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer

Troubleshooting.

D-SUB

DC-IN

1 2

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This bemonitorcan attached  to a wallmountingarmyoupurchase separately.

Disconnect power before procedure.this Followthesesteps:

1 Placemonitoronthefirmsurface(suchas,table) 

2 to Useyourhands holdthemonitorbase 

3 to Useyourhands foldthemonitorbaseasfigureinstructedabovebyswitch

safetylocktotherightside

4 to Oncethemonitorbasebegin foldyoucanreleasethesafetylock(caution:you

must foldhear“click” after you themonitorbase to wallmountposition to

ensure lock locksafety is properly.) 

5 to Followthemanufacturer'sinstructions assemblethewallmountingarm. 

6 Placethewallmountingarmontothebackofthemonitor.Lineuptheholesof

the the the thearmwith holesin backof monitor. 

7 4 into Insertthe screws theholesandtighten. 

8 to Reconnectthecables. Refer theuser'smanualthatcamewiththeoptional

wallmountingarmfor instructions onattaching it wall.  to the  

Noted: VESA models,mountingscrew areholes notavailableforall pleasecheck

withthedealeror ofofficialdepartment AOC. 

Adjusting

Setting Optimal Resolution

Windows Vista

For Windows Vista:

1 Click START.

2 Click CONTROL PANEL.

3 Click Appearance and Personalization.

4 Click Personalization

5 Click Display Settings.

6 Set the resolution SLIDE-BAR to 1366 by 768.

Hotkeys

Power

Press the Power button to turn 0n/off the monitor.

Eco Mode / <

Press the Eco key continuously to select the Eco mode of brightness when there is no OSD ( Eco mode hot key

may not be available in all models).

4:3 or wide image ratio / >

When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size

is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. )

Eco Mode/< 4:3 or wide /> Menu/Enter

Po wer

Auto/Exit

When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to

do auto configure (only for the models with dual or more inputs).

When the OSD is closed, press Auto/Source/Exit button will be Source hot key

function(Only for the models with dual or more inputs).Press Auto/Source/Exit button

continuously to select the input source showed in the message bar, press Menu/Enter

button to change to the source selected.

Auto/ Exit

OSD Setting

Basic and simple instruction on the control keys.

1) Press the MENU-button to activate the OSD window.

2) Press to navigate through the functions. Once t < or > he desired function is highlighted, press the MENU-button

to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.

3) Press < or > to change the settings of the selected function. Press < or > to select another function in sub-menu .

Press AUTO to exit . If you want to adjust any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is

off and then press power button to turn the monitor on.

Notes:

1) If the product has only one signal input, the item of "Input Select" is disable to adjust.

2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to

adjust.

3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.

Luminance

Press (Menu) to display menu.

Press or to select

(Luminance), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Brightness 0-100 Backlight Adjustment

Contrast 0-100 Contrast from Digital-register.

Standard Standard Mode

Text Text Mode

Internet Internet Mode

Game Game Mode

Movie Movie Mode

Eco mode

Sports Sports Mode

Gamma1 Adjust to Gamma1

Gamma2 Adjust to Gamma 2

Gamma

Gamma3 Adjust to Gamma 3

Off Disable dynamic contrast ratio

DCR

On Enable dynamic contrast ratio

Image Setup

Press (Menu) to display menu.

Press or to select (Image

Setup), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Clock 0-100 Adjust picture Clock to reduce

Vertical-Line noise.

Phase 0-100 Adjust Picture Phase to reduce

Horizontal-Line noise

H.Position 0-100 Adjust the horizontal position of the

picture.

V.Position 0-100 Adjust the vertical position of the

picture.

Color Temperature

Press (Menu) to display menu.

Press or to select (Color

Temperature), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Warm 6500K Recall Warm Color Temperature

from EEPROM.

Normal 7300K Recall Normal Color Temperature

from EEPROM.

Cool 9300K Recall Cool Color Temperature

from EEPROM.

sRGB Recall SRGB Color Temperature

from EEPROM.

Red Red Gain from Digital-register

Green Green Gain Digital-register.

User

Blue Blue Gain from Digital-register

Color Boost

Press (Menu) to display menu.

Press or to select (Color

Boost), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Full Enhance on or off Disable or Enable Full Enhance Mode

Nature Skin on or off Disable or Enable Nature Skin Mode

Green Field on or off Disable or Enable Green Field Mode

Sky-blue on or off Disable or Enable Sky-blue Mode

AutoDetect on or off Disable or Enable AutoDetect Mode

Demo on or off Disable or Enable Demo

Picture Boost

Press (Menu) to display MENU.

Press or to select (Picture

Boost); and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Frame Size 14-100 Adjust Frame Size

Brightness 0-100 Adjust Frame Brightness

Contrast 0-100 Adjust Frame Contrast

H. position 0-100 Adjust Frame horizontal Position

V.position 0-100 Adjust Frame vertical Position

Bright Frame on or off Disable or Enable Bright Frame

OSD Setup

Press (Menu) to display menu.

Press or to select (OSD

Setup), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

OSD Setup

H.Position 0-100 Adjust the horizontal position of

OSD

V.Position 0-100 Adjust the vertical position of OSD

Timeout 5-120 Adjust the OSD Timeout

Transparence 0-100 Adjust the transparence of OSD

Language Select the OSD language

Extra

Press (Menu) to display menu.

Press or to select (OSD

Setup), and press to enter.

Press or to select submenu, press

to enter, and press or to

adjust.

Press to exit.

Input Select D-SUB Select Analog Sigal Source as Input

Auto Config yes or no Auto adjust the picture to default

Image Ratio wide or 4:3 Select wide or 4:3 format for display

DDC CI yes or no Turn ON/OFF DDC CI Support / /

Off time to 24hrs Select DC off time r 0

Information Show the information of the main

image and sub-image source

Reset

Press or to select YES or NO.

Press (Menu) to display menu.

Press or to select (Reset),

and press to enter.

Press to exit.

Reset yes or no Reset the menu to default

Exit

Exit Exit the main OSD

Press (Menu) to display menu.

Press or to select (Exit);

and press to exit.

LED Indicator

Status

LED Color

Full Power Mode

White

Active-off Mode

red

Driver

Monitor Driver

Windows 7

1.Start Windows® 7

2.Click on the 'Start' button and then click on 'Control Panel'.

3. Click on the 'Display' icon.

4.Ckick on the “Change display settings” button.

Click the “Advanced Settings” button.

Click the “Monitor” tab and then click the “Properties” button.

7.Click the “Driver” tab.

8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then

click the "Browse my computer for driver software" button.

9. Select "Let me pick from a list of device drivers on my computer".

10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:

X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.

12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk

drive.

3. Close all open windows and remove the CD.

14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color

Matching Profiles.

Windows Vista

1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization".

2. Click "Personalization" and then "Display Settings".

3. Click "Advanced Settings...".

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your

monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".

5. Click "Update Driver..." in the "Driver" tab.

6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers

on my computer".

7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive

F:\Driver (CD-ROM Drive).

8. Select your monitor model and click on the 'Next' button.

9. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.

5. Select the 'Settings' tab then click on the 'Advanced' button.

6. Select 'Monitor' tab

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active, click on 'Properties' button.

Please follow the steps below.

7. Click on the 'Driver' tab and then click on 'Update Driver...' button.

8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.

9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.

10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:

(CD-ROM Drive).

11. Click on the 'Open' button, then click the 'OK' button.

12. Select your monitor model and click on the 'Next' button.

- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message,

please click on the 'Continue Anyway' button.

13. Click on the 'Finish' button then the 'Close' button.

14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.

i-Menu

Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on

screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation

guide.

Screen+

Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool,

it splits the desktop into different panes, each pane displays a different window. You only

need to drag the window to a corresponding pane, when you want to access it. It supports

multiple monitor display to make your task easier. Please follow the installation software to install it.

Troubleshoot

Problem & Question

Possible Solutions

Power LED Is Not ON

Make sure the power button is ON and the Power Cord is properly connected

to a grounded power outlet and to the monitor.

No images on the screen

Is the power cord connected properly?

Check the power cord connection and power supply.

Is the cable connected correctly?

(Connected using the D-sub cable)

Check the DB-15 cable connection.

(Connected using the DVI cable)

Check the DVI cable connection.

* DVI input is not available on every model.

If the power is on, reboot the computer to see the initial screen (the login

screen), which can be seen.

If the initial screen (the login screen) appears, boot the computer in the

applicable mode (the safe mode for Windows ME/XP/2000) and then change

the frequency of the video card.

(Refer to the Setting the Optimal Resolution)

If the initial screen (the login screen) does not appear, contact the Service

Center or your dealer.

Can you see "Input Not Supported" on the screen?

You can see this message when the signal from the video card exceeds the

maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle

properly.

Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has

Ghosting Shadowing Problem

Adjust the Contrast and Brightness Controls.

Press to auto adjust.

Make sure you are not using an extension cable or switch box. We

recommend plugging the monitor directly to the video card output connector

on the back .

Picture Bounces, Flickers Or

Wave Pattern Appears In The

Picture

Move electrical devices that may cause electrical interference as far away

from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution

your are using.

Monitor Is Stuck In Active

Off-Mode"

The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly fitted in its slot.

Make sure the monitor's video cable is properly connected to the computer.

Inspect the monitor's video cable and make sure no pin is bent.

Make sure your computer is operational by hitting the CAPS LOCK key on

the keyboard while observing the CAPS LOCK LED. The LED should either

turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary

colors (RED, GREEN, or

BLUE)

Inspect the monitor's video cable and make sure that no pin is damaged.

Make sure the monitor's video cable is properly connected to the computer.

Screen image is not centered

or sized properly

Adjust H-Position and V-Position or press hot-key (AUTO).

Picture has color defects

(white does not look white)

Adjust RGB color or select desired color temperature.

Horizontal or vertical

disturbances on the screen

Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and

FOCUS.

Press to auto-adjust.

Specification

General Specification

Model number

Driving system TFT Color L DE

Viewable Image Size 47cm diagoanl

Pixel pitch 0.3mm(H) x 0.3mm(V)

Video R, G, B Analog lnterface

Separate Sync. H/V TTL

Display Color 16.7M Colors

Panel

Dot Clock 90 MHz

Horizontal scan range 30 kHz - 83 kHz

Horizontal scan Size(Maximum) 409.8mm

Vertical scan range 55 Hz - 75 Hz

Vertical scan Size(Maximum) 230.4mm

Optimal preset resolution 1366 x 768 (60 Hz)

Highest preset resolution 1366 x 768 (60 Hz)

Plug & Play VESA DDC2B/CI

Input Connector D-Sub 15pin

Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive

Power Source 100~240VAC, 50/60Hz

Active < W 18 (Typical)

Resolution

Power Consumption

Standby < 5 W 0.

Connector Type 15-pin Mini D-Sub

Signal Cable Type Detachable

Dimensions & Weight:

Height (with base) 350.9 mm

Width 447.2 mm

Depth 182.4 mm

Physical

Characteristics

Weight (monitor only) 2.12 kg

Temperature:

Operating 0° to 40° C C

Non-Operating -2 ° to ° 5 C 55 C

Humidity:

Operating 10% to 85% (non-condensing)

Environmental

Non-Operating 5% to % (non-condensing) 93

Altitude:

Operating 0~ 3 m (0~ 000 ft ) ,658 12,

Non-Operating 0~ m (0~ 000 ft ) 12,192 40,

Preset Display Modes

STAND RESOLUTION HORIZONTAL

FREQUENCY(kHZ)

VERTICAL

FREQUENCY(Hz)

VGA 640×480 @60Hz 31.469 59.940

640×480 @67Hz 35.000 66.667

VGA 640×480 @72Hz 37.861 72.809

VGA 640×480 @75Hz 37.500 75.000

Dos-mode 720×400 @70Hz 31.469 70.087

SVGA 800×600 @56Hz 35.156 56.250

SVGA 800×600 @60Hz 37.879 60.317

SVGA 800×600 @72Hz 48.077 72.188

SVGA 800×600 @75Hz 46.875 75.000

Mac-mode 832×624 @75Hz 49.725 74.551

XGA 1024×768 @60Hz 48.363 60.004

XGA 1024×768 @70Hz 56.476 70.069

XGA 1024×768 @75Hz 60.023 75.029

XGA 1024×768 @75Hz 60.241 74.927

1360x768 @60Hz 47.712 60.015

WXGA 1366x768 @60Hz 47.712 59.790

VGA

Pin Assignments

Pin Number 15-Pin Side of the Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 N.C.

5 Detect Cable

6 GND-R

7 GND-G

8 GND-B

9 +5V

10 Ground

11 N.C.

12 DDC-Serial data

13 H-sync

14 V-sync

15 DDC-Serial clock

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the

monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over

the DDC2B channel.

Regulation

FCC Notice

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTICE :

The changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this

equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to

correct such interference.

WEEE Declaration

Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other

household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic equipment.The separate collection

and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure

that it is recycled in a manner that protects human health and the environment. For more information about where

you can drop off your waste equipment for recycling, please contact your local city office, your household waste

disposal service or the shop where you purchased the product .

EPEAT Declaration

EPEAT is a system to help purchasers in the public an compare and select desktop d private sectors evaluate,

computers, notebooks and monitors ba . EPEAT also provides a clear and sed on their environmental attributes

consistent set of performance criteria an opportunity for manufacturers to for the design of products, and provides

secure market recognition for efforts to reduce the environmental impact of its products.

AOC believes in protecting the environment.

With a key concern for the conservation of natural resources, as well as land ll protection, AOC announces the

launch of AOC monitor’s packaging recycling program. This program is designed to help you discard of your

monitor carton and ller materials properly. If a local recycling center is not available, AOC will recycle the

packaging material for you, including foam ller and carton. AOC Display solution will only recycle AOC monitor

packaging. Please refer to the following website address:

Only for North and South American, excluding Brazil:

http://us.aoc.com/about/environmental_impact

For Germany:

http://www.aoc-europe.com/en/service/tco.php

For Brazil:

http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134

Service

Warranty Statement for Europe

LIMITED THREE-YEAR WARRANTY*

AOC Color Monitors sold within Europe

AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a

period of Three (3) years after the original date of consumer purchase. During this period, AOC International

(Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a

new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the

property of AOC International (Europe) GmbH.

If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached

to the product.

Deliver the product freight pre-paid, along with the dated proof of purchase, to the AOC Authorized Service Center.

If you cannot deliver the product in person:

Pack it in its original shipping container (or equivalent)

Put the RMA number on the address label

Put the RMA number on the shipping carton

Insure it (or assume the risk of loss/damage during shipment)

Pay all shipping charges

AOC International (Europe) GmbH is responsible neither for any damage or loss during inbound transport damage

nor to inbound product that was not properly packaged.

AOC International (Europe) GmbH will pay the return shipping charges within one of the countries specified within

this warranty statement. AOC International (Europe) GmbH is not responsible for any costs associated with the

transportation of product across international borders. This includes the international border within the European

Union.

* This limited warranty does not cover any losses or damages that occur as a result of

Shipping or improper installation or maintenance

Misuse

Neglect

Any cause other than ordinary commercial or industrial application

Adjustment by non-authorized source

Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center

Improper environment

Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities

This limited warranty does not cover any of the product firmware or hardware that you or any third party have

modified or altered; you bear the sole responsibility and liability for any such modification or alteration.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A

PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER

PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.

AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY

AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER

BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED

THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO

EVENT SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF

USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM

COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE

MEMBER COUNTRIES OF THE EUROPEAN UNION.

Information in this document is subject to change without notice.

For more details, please visit: http://www.aoc-europe.com/en/service/index.php

Specyfikacje produktu

Marka:	AOC
Kategoria:	monitor
Model:	e943Swn

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AOC e943Swn, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje monitor AOC

AOC CQ32G4 Instrukcja

20 Marca 2025

AOC AGON Pro AG254FZ2 Instrukcja

6 Lutego 2025

AOC 27G42E Instrukcja

2 Lutego 2025

AOC Value-line I2280SWD Instrukcja

12 Stycznia 2025

AOC Q32G3SE Instrukcja

11 Stycznia 2025

AOC AGON Pro AG276QZD2 Instrukcja

11 Stycznia 2025

AOC AGON Pro AG326UD Instrukcja

3 Stycznia 2025

AOC 24G2E5 Instrukcja

29 Grudnia 2024

AOC A2272PWH Instrukcja

29 Grudnia 2024

AOC AGON AG322QCX Instrukcja

29 Grudnia 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

BenQ DesignVue PD2730S Instrukcja

8 Kwietnia 2025

Asus VA279QGS Instrukcja

8 Kwietnia 2025

Acer EV227Q Instrukcja

8 Kwietnia 2025

BenQ PD3226G Instrukcja

7 Kwietnia 2025

Samsung LH65QETEPGC Instrukcja

5 Kwietnia 2025

Philips 221V8LB Instrukcja

4 Kwietnia 2025

Gigabyte MO27U2 Instrukcja

4 Kwietnia 2025

Philips Momentum 242M7 Instrukcja

3 Kwietnia 2025

Samsung F24T650FYR Instrukcja

2 Kwietnia 2025

Canon DP-V1711 Instrukcja

2 Kwietnia 2025