Instrukcja obsługi Antec Minuet 350
Antec
Komputerowe przejęcie
Minuet 350
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antec Minuet 350 (7 stron) w kategorii Komputerowe przejęcie. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
Minuet 350
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
পᡅ䂀ᯢ
1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, your new product may differ slightly from the description in this
manual. This isn’t a problem; it’s simply an improvement. As of the date of publi-
cation, all features, descriptions, and illustrations in this manual are correct.
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the user manuals that come with those components and drives.
MINUET 350 USER’S MANUAL
The Minuet 350 is a small case that’s big on features. It can be configured in
a desktop or vertical orientation. It comes with an 80PLUS® certified 350 Watt
power supply (PSU). The PSU generates less heat because it is designed for high
efficiency. This keeps the power supply cool and prolongs its working life.
The PSU includes Universal Input with Active Power Factor Correction (PFC).
Universal Input allows you to connect your PSU to any AC power outlet between
100~240V without setting a voltage switch. Active PFC reduces electrical waste
by improving the power factor value to the power supply, helping the power plant
to provide power more efficiently.
The PSU comes with an on/off switch. Make sure you turn the switch to the ON
(I) position before you boot up your computer for the first time. Normally, you
won’t need to switch it OFF (O), since the power supply can be controlled with the
soft on/off switch on the front of your computer case. If your computer crashes
and you can’t shut it down using the soft switch, you can switch the main power
to the OFF (O) position to clear the fault, then reboot.
SETTING UP
1. Take the case out of the box. Remove the Styrofoam and the plastic bag.
Place the case on a flat surface.
2. Remove the thumbscrews from the top panel (at the rear of the case). Slide
the panel to the rear of the case and remove it. Set the panel safely aside.
Note: Please don’t try to use your fingernails to pry or lift the panel.
3. Inside the case you should see the power supply, some wiring with marked
connectors (USB, PWR etc.), an installed I/O panel and a power cord. You will
also find a bag of screws, four rubber feet and two plastic stands.
4. Horizontal Orientation: stick the four adhesive rubber feet to the bottom panel
of the case to protect the paint from scratches.
5. Vertical Orientation: place the Minuet 350 in the two plastic stands such that
the side panel with the 80mm fan is facing up. Adjust the stands to fit snugly
against the case sides.
2
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking the appropriate time and caution when working with it.
Please take reasonable precautions.
MOTHERBOARD INSTALLATION
This manual does not cover CPU, RAM, or expansion card installation. Please consult
your motherboard manual for specific mounting instructions and troubleshooting.
1. Lay the case down so that the open side is up. You should be able to see the
drive cage and power supply.
2. Make sure you have the appropriate I/O panel for the motherboard. If the panel
provided is not suitable for the motherboard, please contact the motherboard
manufacturer for the correct I/O panel.
3. Line up the motherboard with the standoff holes. Determine which holes line
up and remember where they are. Not all motherboards will match with all of
the provided screw holes, and this is not necessary for proper functionality.
Some standoffs may be pre-installed for your convenience.
4. Remove the motherboard by lifting it up.
5. Screw in the brass standoffs to the threaded holes that line up with the
motherboard.
6. Place the motherboard on the standoffs.
7. Screw in the motherboard to the standoffs with the provided Phillips-head
screws.
8. The motherboard is now installed.
POWER/LED CONNECTIONS
The power supply is an ATX12V form factor power supply. It has a single 24-pin
Main Power Connector, and a 4-pin +12V Power Connector for the motherboard.
It is backwards compatible to previous ATX form factor power supplies. If your
motherboard does not support the +12V 4-pin Power Connector, you can still use
this power supply. It also comes with three 4-pin Peripheral Power Connectors,
one SATA Power Connector and one 4-pin Floppy Drive Power Connector for your
drives.
1. Connect the 24-pin Main Power Connector and
the 4-pin 12V connector to the motherboard
as needed. If the motherboard uses a 20-pin
connector, detach the 4-pin attachment on the
24-pin power connector (see pictures 1 and 2).
Note: the detachable 4-pin section cannot be
used in place of a 4-pin +12V connector.
2. Power Switch (labeled POWER SW) connects to the PWR connector on the
motherboard. Polarity (positive and negative) does not matter for switches.
3. Connect the Power LED (labeled POWER LED) to your motherboard. For LEDs,
colored wires are positive (+). White or black wires are negative (–). If the
LED does not light up when the system is powered on, try reversing the
connection. For more info on connecting LEDs to your motherboard, see your
motherboard manual.
4. Hard Drive LED (labeled HDD LED) connects to the hard drive activity header.
ADD-IN CARDS
Make sure that any cards you add to your Minuet 350 case are of the “Low-Profile”
variety. Your Minuet is a small form factor case and full-height cards will not fit.
Picture 2
Picture 1
For 24-pin
motherboards
For 20-pin
motherboards
Specyfikacje produktu
| Marka: | Antec |
| Kategoria: | Komputerowe przejęcie |
| Model: | Minuet 350 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Antec Minuet 350, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Komputerowe przejęcie Antec
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Instrukcje Komputerowe przejęcie
- Komputerowe przejęcie Supermicro
- Komputerowe przejęcie Gigabyte
- Komputerowe przejęcie StarTech.com
- Komputerowe przejęcie Asus
- Komputerowe przejęcie Genesis
- Komputerowe przejęcie Akasa
- Komputerowe przejęcie Cooler Master
- Komputerowe przejęcie Icy Box
- Komputerowe przejęcie Dell
- Komputerowe przejęcie Corsair
- Komputerowe przejęcie NZXT
- Komputerowe przejęcie Cougar
- Komputerowe przejęcie Phanteks
- Komputerowe przejęcie Razer
- Komputerowe przejęcie ModeCom
- Komputerowe przejęcie Sharkoon
- Komputerowe przejęcie Chenbro Micom
- Komputerowe przejęcie 3M
- Komputerowe przejęcie XPG
- Komputerowe przejęcie IStarUSA
- Komputerowe przejęcie Silverstone
- Komputerowe przejęcie Thermaltake
- Komputerowe przejęcie Fractal Design
- Komputerowe przejęcie Be Quiet!
- Komputerowe przejęcie Techly
- Komputerowe przejęcie Monoprice
- Komputerowe przejęcie Zalman
- Komputerowe przejęcie Advantech
- Komputerowe przejęcie Evnbetter
- Komputerowe przejęcie Xigmatek
- Komputerowe przejęcie Akyga
- Komputerowe przejęcie Rosewill
- Komputerowe przejęcie AeroCool
- Komputerowe przejęcie Krux
- Komputerowe przejęcie 3R System
- Komputerowe przejęcie SilentiumPC
- Komputerowe przejęcie CoolerMaster
Najnowsze instrukcje dla Komputerowe przejęcie
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024