Instrukcja obsługi Antec BP350P - EC
Antec
Zasilanie komputera
BP350P - EC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antec BP350P - EC (3 stron) w kategorii Zasilanie komputera. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
Basiq
Models: BP350, BP350P
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
1
Antec Basiq User’s Manual
ATX12V version 2.01 power supply
Models: BP350/BP350P
Antec Basiq series power supplies are built to be compatible with the ATX12V
version 2.01 specification. They include dual 12V output circuitry that delivers
safer and more reliable output to your system’s components, as well as higher
energy efficiency, which reduces power consumption by up to 25%, saving you
money on your electricity bill. In addition we’ve included a variety of protective
circuitry: OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP
(Short Circuit Protection).
Passive Power Factor Correction (applicable only to models designed for sale in
the European Union): BP350P designed for the EU include Power Factor Correction
(PFC) circuitry in accordance with European standard regulation code EN61000-3-2.
Power Switch: This power supply comes with a main power switch. Make sure
you turn the switch to the ON ( I ) position before you boot up your computer for
the first time. In normal operation there is no need to turn the switch to the OFF
(O) position since the power supply is equipped with a soft on/off feature which
turns your computer on and off through the soft switch on your computer case.
You may need to turn the switch to the OFF position occasionally should your
computer crash and you cannot shut it down through use of the soft switch.
Installation:
1. Turn off the hard switch on your power supply if any.
2. Open your computer case. Follow the directions provided in your case manual.
3. Disconnect all power connectors from the motherboard and from the peripheral
devices such as case fans, hard drives, optical drives, floppy drives, etc.
4. Disconnect the power cord from your old power supply.
5. Remove the existing power supply from your computer case and replace it
with your new Antec power supply.
6. (NOT applicable to models designed for the European Union): Before you Note
install your new power supply, check the red power supply voltage switch
setting. It should match your local power voltage (115V for North America,
Japan, etc., 230V for Europe, South East Asia, and many other countries).
Change the voltage setting if necessary. If you use the wrong voltage setting,
you could damage your system and void your warranty.
7. Turn the hard switch on the Antec power supply to the OFF position and
connect the AC power cord to the power supply.
8. Connect the 24-pin Main Power Connector and the
4-pin +12V connector to your motherboard as
needed. If your motherboard uses a 20-pin connector;
detach the 4-pin attachment on the 24-pin power
connector, see pictures 1 and 2. : the detach-Note
able 4-pin section cannot be used in place of the 4-pin
+12V connector.
9. Connect the peripheral power connectors to devices such as hard drives,
optical drives, etc.
10. Connect the Serial ATA connectors if you are using Serial ATA hard drive.
11. Close your computer case.
Picture 1 Picture 2
Antec, Inc.
47900 Fremont Blvd.
Fremont, CA 94538
USA
tel: +1 510-770-1200
fax: +1 510-770-1288
Antec Europe B.V.
Sydneystraat 33
3047 BP Rotterdam
The Netherlands
tel: +31 (0) 10 462-2060
fax: +31 (0) 10 437-1752
Customer Support:
US & Canada
1-800-22ANTEC
customersupport@antec.com
Europe
+31 (0) 10 462-2060
europe.techsupport@antec.com
www.antec.com
© Copyright 2006 Antec, Inc. All rights reserved.
All trademarks are the property of their respective owners.
Reproduction in whole or in part without written permission is prohibited.
Printed in China.
Version 1.0.6 05/04/2006
Specyfikacje produktu
| Marka: | Antec |
| Kategoria: | Zasilanie komputera |
| Model: | BP350P - EC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Antec BP350P - EC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zasilanie komputera Antec
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
Instrukcje Zasilanie komputera
- Zasilanie komputera LC-Power
- Zasilanie komputera MSI
- Zasilanie komputera APC
- Zasilanie komputera Akasa
- Zasilanie komputera Cooler Master
- Zasilanie komputera Corsair
- Zasilanie komputera Pyle
- Zasilanie komputera FSP
- Zasilanie komputera Ewent
- Zasilanie komputera CLUB3D
- Zasilanie komputera Silverstone
- Zasilanie komputera Thermaltake
- Zasilanie komputera Fractal Design
- Zasilanie komputera Be Quiet!
- Zasilanie komputera Chieftec
- Zasilanie komputera Allied Telesis
- Zasilanie komputera Steren
- Zasilanie komputera Fantec
- Zasilanie komputera ENDORFY
- Zasilanie komputera Xilence
- Zasilanie komputera Zalman
- Zasilanie komputera Seasonic
- Zasilanie komputera AeroCool
- Zasilanie komputera 3Com
- Zasilanie komputera AZZA
- Zasilanie komputera Mini-Box
- Zasilanie komputera CoolerMaster
- Zasilanie komputera FSP/Fortron
Najnowsze instrukcje dla Zasilanie komputera
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024