Instrukcja obsługi AMX NCITE-813A

AMX nieskategoryzowany NCITE-813A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX NCITE-813A (141 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/141

INSTRUCTION MANUAL

INCITE DIGITAL VIDEO

PRESENTATION SYSTEMS

NCITE-813

NCITE-813A

NCITE-813AC

To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before touching any internal materials.

When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed to make sure people, products, and tools are

as free of static charges as possible. Grounding straps, conductive smocks, and conductive work mats are specically designed for this purpose. These items should not be

manufactured locally, since they are generally composed of highly resistive conductive materials to safely drain static discharges, without increasing an electrocution risk

in the event of an accident.

Anyone performing eld maintenance on AMX equipment should use an appropriate ESD eld service kit complete with at least a dissipative work mat with a ground cord

and a UL listed adjustable wrist strap with another ground cord.

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not t

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. ONLY USE attachments/accessories specied by the manufacturer.

12. USE ONLY with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. DO NOT expose this apparatus to dripping or splashing and ensure that no objects lled with liquids, such as vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

18. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or re.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt-

age” within the product’s enclosure that may be of sucient magnitude to constitute a risk of electrical shock to persons.

ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside source

(such as human hands) into an integrated circuit, often resulting in damage to the circuit.

WARNING: To reduce the risk of re or electrical shock, do not expose this apparatus to rain or moisture.

WARNING: No naked ame sources - such as candles - should be placed on the product.

WARNING: Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.

means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright protection claimed extends to AMX hardware

and software and includes all forms and matters copyrightable material and information now allowed by statutory or judicial law or herein after granted, including without

limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks, etc. Reproduction or disassembly of em-

bodied computer programs or algorithms is expressly prohibited.

LIABILITY NOTICE

No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the preparation of this publication, AMX

assumes no responsibility for error or omissions. No liability is assumed for damages resulting from the use of the information contained herein. Further, this publication

and features described herein are subject to change without notice.

AMX WARRANTY AND RETURN POLICY

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

ESD WARNING

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable :

parts inside. Refer all servicing to qualied service personnel.

Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch.

WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the

product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of

AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is

equipped with a detachable power cord, use only the type provided, or specied, by the manufacturer or your local distributor.

BATTERY INSTRUCTIONS:

THIS PRODUCT CONTAINS A LITHIUM PACK OR COIN/BUTTON CELL BATTERY. IF MISUSED OR ABUSED THIS CAN RESULT IN:

• Smoke or gas hazard

• Heat hazard

• Fire hazard

• Explosion hazard

WARNING: Do not place batteries in mouth or ingest. Chemical burn hazard. Keep new and used batteries out of reach of children and

pets. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

WARNING: If battery compartment does not close securely, stop using the product and keep it away from children and pets.

WARNING: Do not handle leaking or damaged Lithium batteries.

WARNING: Risk of leakage. Only use the specied type of batteries. Never mix new and used batteries.

Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place.

WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like.

WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Dispose of used batteries according to the instructions.

WARNING: Do not recharge non-rechargeable batteries.

WARNING: Avoid exposure to extreme heat or cold.

Please dispose of any used batteries properly, following any local regulations. Do not incinerate.

WARNING: Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.

RACK MOUNTING:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may

be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum

ambient temperature (Tma) specied by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air ow required for safe operation of the equipment is

not compromised.

C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical

D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the eect that overloading of the

circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when

addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections

other than direct connections to the branch circuit (e.g. use of power strips).”

FCC AND CANADA EMC COMPLIANCE INFORMATION:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

WARNING: This product must not be used in residential areas.

CAUTION: Changes or modications not expressly approved by the manufacturer could void the user’s authority to operate this device.

WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

NOTE: For interference purposes, the residential and domestic environments are dened as an environment within 10meters of radio or broadcast

receiving equipment or home use. CAN ICES-3 (A)/NMB-3(A)

警告

此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰采取切实可行的措施

Instruction Manual - Incite Digital Video Presentation Systems

Table of Contents

Overview .......................................................................................................... 14

4K/60 4:4:4 Support................................................................................................................ 14

HDMI 2.0 and HDCP 2.2 Support ............................................................................................. 14

Scaled Outputs........................................................................................................................ 14

Advanced Windowing with Scaling.......................................................................................... 14

DSP by BSS ............................................................................................................................. 14

dbx AFS (Advanced Feedback Suppression)........................................................................... 14

Crown DriveCore Amplification (NCITE-813A/AC only) .......................................................... 15

Distance Transport................................................................................................................. 15

Flexible Interface Options ...................................................................................................... 15

Integrated NX Central Control (NCITE-813AC only) ............................................................... 15

Incite Digital Video Presentation Systems ....................................................... 16

NCITE-813/813A .............................................................................................................. 16

Specifications ......................................................................................................................... 16

NCITE-813AC ................................................................................................................... 19

Specifications ......................................................................................................................... 19

Port Numbers......................................................................................................................... 23

Installation ...................................................................................................... 24

Overview .......................................................................................................................... 24

Mounting the NCITE-813 into an Equipment Rack............................................................ 24

Ventilation .............................................................................................................................. 25

Wiring and Device Connections ........................................................................ 26

Overview .......................................................................................................................... 26

LEDs (NCITE-813AC only) ....................................................................................................... 27

General Status LEDs.......................................................................................................................... 28

SERIAL LEDs...................................................................................................................................... 29

RELAYS LEDs..................................................................................................................................... 29

IR/SERIAL LEDs................................................................................................................................. 30

I/O LEDs............................................................................................................................................. 30

Video Input Selection (1-8) ..................................................................................................... 30

Navigation Pushbuttons.......................................................................................................... 31

MENU ON/OFF Pushbutton ..................................................................................................... 31

SELECT Pushbutton................................................................................................................ 31

MODE Pushbutton................................................................................................................... 32

Program Port (NCITE-813AC only) ......................................................................................... 32

USB Port (NCITE-813AC only)................................................................................................. 32

VIDEO INPUTS (1-8) ................................................................................................................ 33

VGA INPUTS (1-2) .............................................................................................................................. 33

HDMI INPUTS (3-6) ............................................................................................................................ 34

DXLITE INPUTS (7-8) ......................................................................................................................... 34

Instruction Manual - Incite Digital Video Presentation Systems

AMP OUT................................................................................................................................. 36

AUDIO OUTPUTS ..................................................................................................................... 37

Rear Panel Control and Power (NCITE-813AC only) ........................................................ 38

Serial Ports ............................................................................................................................ 38

RS-232 Ports ..................................................................................................................................... 38

RS-232/422/485 Port......................................................................................................................... 38

Relay Port............................................................................................................................... 39

Relay Connections ............................................................................................................................. 39

AxLink Port and LED (4-pin captive-wire) .............................................................................. 40

Configuration DIP Switch........................................................................................................ 41

Program Run Disable (PRD) Mode..................................................................................................... 41

ICSLAN Port............................................................................................................................ 42

Using the ICSLAN Network................................................................................................................ 42

Opening LAN and ICSLAN Sockets from Code.................................................................................... 42

USB Port ................................................................................................................................. 42

ID Pushbutton......................................................................................................................... 43

Switching to Static or Dynamic IP Addressing ................................................................................... 43

Restoring the Controller Settings to the Factory Defaults ................................................................ 43

Restoring the Controller?s Factory Firmware Image........................................................................ 43

IPv4.................................................................................................................................................... 44

IPv6.................................................................................................................................................... 44

Power Connector/Switch........................................................................................................ 44

Audio/Video Configuration ............................................................................... 45

Overview .......................................................................................................................... 45

Using the On-Screen Menu............................................................................................... 45

Audio Settings ........................................................................................................................ 46

Selecting an Audio Test Tone.................................................................................................. 47

Changing the Microphone Mode.............................................................................................. 47

Video Settings......................................................................................................................... 48

Network Settings.................................................................................................................... 50

Status Menu............................................................................................................................ 50

Master Controller Configuration Options......................................................................... 52

WebConsole - System Configuration ...................................................................................... 52

WebConsole User Interface - Additional Documentation........................................................ 52

Using a Web Browser....................................................................................................... 52

Default User Names and Passwords ...................................................................................... 53

On-Board WebConsole User Interface ............................................................. 54

WebConsole UI Overview ................................................................................................. 54

NCITE-813AC WebConsole Options ........................................................................................ 54

NCITE-813/813A WebConsole Options.................................................................................... 54

System Configuration Interface Tips: ................................................................................................ 55

Accessing the WebConsole..................................................................................................... 55

Default User Names and Passwords ...................................................................................... 55

Instruction Manual - Incite Digital Video Presentation Systems

WebConsole - Network Options ....................................................................... 56

Network Overview............................................................................................................ 56

Network - IPv4 Setup ....................................................................................................... 57

IPv4 Setup Options.................................................................................................................. 57

Network - IPv6 Setup ....................................................................................................... 58

IPv6 Setup Options.................................................................................................................. 58

Network - Date/Time ....................................................................................................... 59

Setting the Mode for the Clock Manager................................................................................. 59

Setting Daylight Savings Rules............................................................................................... 60

Selecting a Custom NIST Server............................................................................................. 60

Adding a Custom NIST Server to the List................................................................................ 61

Removing an NIST Server From the List................................................................................. 61

Clock Manager NetLinx Programming API ............................................................................. 61

Network - NetLinx Setup ................................................................................................. 62

ICSP Setup Options ................................................................................................................. 62

WebConsole - Security Options ........................................................................ 63

Security Overview ............................................................................................................ 63

Login Rules............................................................................................................................. 63

User and Role Name Rules................................................................................................................ 64

Password Rules................................................................................................................................. 64

Security - General............................................................................................................ 65

System Level Security - System Security Settings ................................................................. 65

System Security Options......................................................................................................... 65

Security Presets ..................................................................................................................... 68

Audit Logs............................................................................................................................... 68

Banners.................................................................................................................................. 69

Security - Roles................................................................................................................ 69

Default Roles.......................................................................................................................... 70

Role Permissions.................................................................................................................... 70

Adding a New Role.................................................................................................................. 71

Viewing and Modifying Role Security Settings Details............................................................ 72

Deleting a Role ....................................................................................................................... 73

Locking/Disabling a Role........................................................................................................ 73

Security - Users ............................................................................................................... 73

Default User Accounts ............................................................................................................ 73

Adding a New User ................................................................................................................. 74

Viewing and Editing User Security Settings............................................................................ 75

Deleting a User....................................................................................................................... 75

Locking/Disabling a User........................................................................................................ 75

Security Settings - LDAP.................................................................................................. 76

LDAP Options.......................................................................................................................... 76

Accepting Changes ................................................................................................................. 77

Testing the Connection to the LDAP Server............................................................................ 77

Instruction Manual - Incite Digital Video Presentation Systems

AUDMIC_EQ_CF............................................................................................................................................... 114

?AUDMIC_EQ_FT............................................................................................................................................. 114

AUDMIC_EQ_FT............................................................................................................................................... 114

?AUDMIC_EQ_GAIN......................................................................................................................................... 114

AUDMIC_EQ_GAIN........................................................................................................................................... 115

?AUDMIC_EQ_Q............................................................................................................................................... 115

AUDMIC_EQ_Q................................................................................................................................................. 115

?AUDMIC_GAIN ............................................................................................................................................... 115

AUDMIC_GAIN ................................................................................................................................................. 115

?AUDMIC_GATING ........................................................................................................................................... 116

AUDMIC_GATING............................................................................................................................................. 116

?AUDMIC_GATING_ATTACK............................................................................................................................ 116

AUDMIC_GATING_ATTACK.............................................................................................................................. 116

?AUDMIC_GATING_DEPTH.............................................................................................................................. 116

AUDMIC_GATING_DEPTH................................................................................................................................ 116

?AUDMIC_GATING_HOLD................................................................................................................................ 116

AUDMIC_GATING_HOLD.................................................................................................................................. 116

?AUDMIC_GATING_RELEASE.......................................................................................................................... 117

AUDMIC_GATING_RELEASE............................................................................................................................ 117

?AUDMIC_GATING_THRESH............................................................................................................................ 117

AUDMIC_GATING_THRESH ............................................................................................................................. 117

?AUDMIC_LIMITER.......................................................................................................................................... 117

AUDMIC_LIMITER............................................................................................................................................ 117

?AUDMIC_LIMITER_ATTACK........................................................................................................................... 117

AUDMIC_LIMITER_ATTACK............................................................................................................................. 117

?AUDMIC_LIMITER_RELEASE......................................................................................................................... 118

AUDMIC_LIMITER_RELEASE........................................................................................................................... 118

?AUDMIC_LIMITER_THRESH........................................................................................................................... 118

AUDMIC_LIMITER_THRESH ............................................................................................................................ 118

?AUDMIC_ON................................................................................................................................................... 118

AUDMIC_ON..................................................................................................................................................... 118

?AUDMIC_PHANTOM_PWR ............................................................................................................................. 118

AUDMIC_PHANTOM_PWR ............................................................................................................................... 118

?AUDMIC_PREAMP_GAIN ............................................................................................................................... 119

AUDMIC_PREAMP_GAIN ................................................................................................................................. 119

?AUDMIC_STEREO........................................................................................................................................... 119

AUDMIC_STEREO ............................................................................................................................................ 119

?AUDOUT_BALANCE ....................................................................................................................................... 119

AUDOUT_BALANCE ......................................................................................................................................... 119

?AUDOUT_DELAY ............................................................................................................................................ 119

AUDOUT_DELAY .............................................................................................................................................. 119

AUDOUT_DUCK_ATTACK ................................................................................................................................ 120

AUDOUT_DUCK_HOLD .................................................................................................................................... 120

AUDOUT_DUCK_LEVEL ................................................................................................................................... 120

AUDOUT_DUCK_RELEASE .............................................................................................................................. 120

?AUDOUT_DUCK_THRESH .............................................................................................................................. 120

AUDOUT_DUCK_THRESH ................................................................................................................................ 120

?AUDOUT_DUCKING........................................................................................................................................ 120

AUDOUT_DUCKING.......................................................................................................................................... 121

?AUDOUT_EQ_CF ............................................................................................................................................ 121

AUDOUT_EQ_CF.............................................................................................................................................. 121

?AUDOUT_EQ_FT ............................................................................................................................................ 121

AUDOUT_EQ_FT .............................................................................................................................................. 121

?AUDOUT_EQ_GAIN ........................................................................................................................................ 121

AUDOUT_EQ_GAIN .......................................................................................................................................... 122

?AUDOUT_EQ_MODE....................................................................................................................................... 122

AUDOUT_EQ_MODE......................................................................................................................................... 122

?AUDOUT_EQ_Q .............................................................................................................................................. 122

AUDOUT_EQ_Q................................................................................................................................................ 122

AUDOUT_GROUP_MUTE.................................................................................................................................. 122

AUDOUT_GROUP_VOLUME.............................................................................................................................. 122

?AUDOUT_MAXVOL ......................................................................................................................................... 122

AUDOUT_MAXVOL ........................................................................................................................................... 123

Instruction Manual - Incite Digital Video Presentation Systems

Incite Digital Video Presentation Systems

NCITE-813/813A

FIG. 2 displays the NCITE-813:

FIG. 2 NCITE-813 (front panel)

Specifications

The following table lists the specications for the NCITE-813/813A Digital Video Presentation Systems:

Instruction Manual - Incite Digital Video Presentation Systems

NCITE-813/813A Specifications

General:

Enclosure: Metal with black matte nish

Dimensions (HWD): 1 11/16” x 19” x 14” (4.4 cm x 48.3 cm x 35.6 cm)

Weight: TBA

Regulatory Compliance: TBA

Included Accessories: • (1) Power Cord, Universal

• (2) Front Rack Mounting Brackets

• (4) Rubber Feet

Active Power Requirements:

Power Consumption: TBA

Power Connector: • IEC Power Card Connector

•100-240 VAC

•50-60 Hz

Environmental:

Temperature

(Operating):

0º C to 40º C (32º F to 104º F)

Temperature (Storage): -10º C to 70º C (14º F to 158º F)

Humidity (Operating): 5% to 85% RH

Ethernet:

Connection: (1) RJ-45

Description: 10/100 Port RJ-45 connector provides TCP/IP communication

Link/Act Indicator: Link/Activity LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on

the front panel

Speed Indicator: Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the

speed is 10 Mbps

Integrated Amplier (NCITE-813A only):

Crown DriveCore

Amplication:

• Integrated Crown DriveCore Amplier (NCITE-813A only)

• 8 Ohm stereo / 70 V / 100 V mono selectable amplier

Integrated Matrix Switcher Control:

Source Select Buttons

1-8:

Press to select audio and video source selection.

Navigation Control (Up,

Down, Left, Right,

Select):

For on-screen menu navigation and selection

Menu On/O: For entering or exiting on-screen menu mode

Video Mute: Press to mute/un-mute (enable/disable) all video output displays. Video mute results in a blank screen on the output

display.

Volume Knob: Turn on volume up/down, push to mute/un-mute, assigned to audio group 1.

17Instruction Manual - Incite Digital Video Presentation Systems

Incite Digital Video Presentation Systems

NCITE-813/813A Specifications (Cont.)

Presentation Switcher:

Video Switching: 8x1:3 4K60 4:4:4 Video Switching, selected scaled image presented to 3 outputs simultaneously

Video Inputs: • (2) HD15; supports RGBHV

• (4) HDMI; supports 4K60 4:4:4 HDMI 2.0/HDCP 2.2

• (2) DXLite; supports 4K60 4:4:4 HDMI 2.0, HDCP 2.2, audio, and power (receives signals from DX-TX-DWP-4K

DXLink 4K HDMI Decor Style Wallplate Transmitter

Video Outputs: • (2) HDMI; supports 4K60 4:4:4 HDMI 2.0/HDCP 2.2

• (1) DXLite; supports 4K60 4:4:4 HDMI 2.0, HDCP 2.2, audio, power, and USB 2.0 (sends signal to DXL-RX-4K60

DXLite RX)

HDCP Support: • Yes, including HDCP 1.x and HDCP 2.2

• Key Management System

• AMX HDCP InstaGate Pro™ Technology

• Key support up to 16 devices per output, independent of source device

EDID Management: A preferred EDID can be selected for each input or any display EDID can be mirrored to any input independently.

HDMI with HDMI:

Signal Type Support: • HDMI 2.0, HDCP 2.2

• DVI-D (Single Link with HDMI Cable Adapter)

• DisplayPort ++ (Input Only, with HDMI Cable Adapter)

Input Connectors: (4) HDMI Type A Female Ports

Output Connectors: (2) HDMI Type A Female Ports

Output Scaling: Yes, selected scaled image presented to 3 outputs (2 HDMI and 1 DXLite) simultaneously

Video Data Rate (Max): 18 Gbps (Max)

Video Pixel Clock (Max): Up to 600 MHz

Progressive Resolution

Support:

480p up to 4096x2160@60Hz 4:4:4 including 3840x2160 4:4:4

Interlaced Resolution

Support:

480i, 576i, 1080i

4K Resolution Support

(Max):

• 3840x2160p@24/25/30/60Hz @ 4:4:4

• 4096x2160p@24/25/30/60Hz @ 4:4:4

HDMI Cable

Requirement:

HDMI High Speed Cable, Category 2, Required

HDCP Support: • Yes, including HDCP 1.x and HDCP 2.2

• Key Management System

• AMX HDCP InstaGate Pro™ Technology

• Key support up to 16 devices per output, independent of source device

Audio:

Audio Inputs: • (6) 3.5mm 5-position captive-wire terminals; support balanced (dierential) or unbalanced (single-ended) stereo

audio

• (2) 3.5mm 3-pin captive-wire MIC connectors; supports up to two mono microphones, unbalanced or balanced

audio

• (4) HDMI connections support digital audio

• (2) DXLink connections support embedded DXLite audio

Audio Outputs: • (1) Amplied audio output; 4-position captive-wire connector; supports amplied, variable, mono or stereo audio

(NCITE-813A only)

• (2) Line level audio output; supports balanced or unbalanced mono or stereo

• (2) HDMI connections support embedded digital audio

• (1) DXLite output support embedded digital audio

Analog Video (RGBHV with HD15):

Compatible Formats: RGBHV

Input Connector: HD-15

Resolution Support: Up to 1920x1200@60Hz Reduce Blanking

Auto-Adjust Input: Supported

Digital Processing: 24-bit, 165 MHz

20Instruction Manual - Incite Digital Video Presentation Systems

Incite Digital Video Presentation Systems

NCITE-813AC Specifications (Cont.)

Onboard Master:

Controller: Integrated Controller is the equivalent of a NetLinx NX-2200 Integrated Controller

Memory: •NVRAM: 1 MB

•Memory Card: 16 GB SD

•DDRAM: 1 GB

NOTE:

Supports external USB Solid State Drive

Processor: 1600 MIPS

Program Port: (1) USB Standard B

Conguration Dip Switch: 4-Position

ID Pushbutton: Black ID pushbutton for setting IP mode and reverting to default conguration and rmware It has no eect on the

Internal Switcher Device.

Status Indicator: Status LED (green) blinks to indicate that the system is programmed and communicating properly

Input Indicator: Input LED (yellow) blinks to indicate that the Controller is receiving data

Output Indicator: Output LED (red) blinks to indicate that the Controller is transmitting data

USB Host Port: (2) USB Standard A, one on front and one on back, USB Host port supports Solid State drive for upgrading rmware, loading

code les, copying conguration data and remote storage

Control Parts and Indicators:

AxLink Port (1): (1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices

AxLink Indicator: (1) AxLink LED (green) indicates the state of the AxLink port

RS-232/422/485 Port: • (1) 10-position 3.5mm Screw Terminal

•NetLinx Port 1

• XON/XOFF (transmit on / transmit o)

• CTS/RTS (clear to send/ready to send)

• 300 - 115,200 baud

RS-232 Port: • (3) 5-position 3.5mm Screw Terminal

•NetLinx Ports 2-4

• XON/XOFF (transmit on / transmit o)

• CTS/RTS (clear to send/ready to send)

• 300 - 115,200 baud

Serial Indicator: (4) sets of LEDs (red/yellow) indicate when serial Ports 1-4 are transmitting and receiving data

IR/Serial: • (4) 2-position 3.5mm Screw Terminal

• 4 IR Transmit / 1-way Serial ports

•NetLinx Ports 11-14

• Support high-frequency carriers up to 1.142 MHz

• 4 IR/Serial data signals can be generated simultaneously

IR/Serial Indicators: (4) LEDs (red) indicate when each of the IR/Serial ports (11-14) are transmitting control data

I/O Channels: • (4) One 6-position 3.5mm Screw Terminal

• 4-channel binary I/O port for contact closure with each

• input being capable of voltage sensing

•NetLinx Port 22

• Channels 1-4

I/O Indicator: (4) LEDs (yellow) indicate each of the I/O channels (1-4) are active

Relays: • (4) One 2-position 3.5 mm Screw Terminal, (4) singlepole, single-throw relays

•NetLinx Port 21

• Channels 1-4

• Each relay can switch up to 24 VDC or 28 VAC @ 1 A

• Each relay is independently controlled

Relays Indicators: (4) LEDs (red) indicate when each of the relay channels (1-4) are active (closed)

Integrated Matrix Switcher Control:

Source Select Buttons

1-8:

Press to select audio and video source selection.

Navigation Control (Up,

Down, Left, Right, Select):

For on-screen menu navigation and selection

Menu On/O: For entering or exiting on-screen menu mode

FIG. 28 Pinout table and HD-15 receptacle pins on NCITE-813AC

Wiring and Device Connections

Rear Panel Inputs and Outputs

The following sub-sections describe each component on the rear panel of the Digital Video Presentation Systems. Refer to FIG. 7

on page 26 for the component layout of the rear panel.

VIDEO INPUTS (1-8)

The VIDEO INPUTS area on the rear panel consists of eight video ports including 2 VGA ports, 4 HDMI ports, and 2 DXLITE ports.

FIG. 27 displays the VIDEO INPUTS ports.

FIG. 27 VIDEO INPUTS ports

The following sections provide more details for each type of input port.

VGA INPUTS (1-2)

The NCITE-813AC features two HD-15 VGA connectors for RGBHV video input. These connectors are used to accept a variety

of analog video signals from a source device. These ports support standard VGA cables and standard HD-15 to RCA component

cables ( ). The following table provides cable pinout details for HD-15 connections for VGA, component, S-Video, FG10-2170-03

and composite.

FIG. 28 displays the location of the pins for each VGA input.

Instruction Manual - Incite Digital Video Presentation Systems

VGA INPUT Connector Cable Pinouts

Input Pin # VGA-RGBHV Component S-Video Composite

1 Red Pr n/c n/c

2 Green Y Y Composite

3 Blue Pb C n/c

4 n/c n/c n/c n/c

5 GND n/c n/c n/c

6 GND - Red GND - Pr n/c n/c

7 GND - Green GND - Y GND - Y GND - Composite

8 GND - Blue GND - Pb GND - C n/c

9 +5 V DDC n/c n/c n/c

10 GND n/c n/c n/c

11 n/c n/c n/c n/c

12 DDC_SDA n/c n/c n/c

13 H Sync n/c n/c n/c

14 V Sync n/c n/c n/c

15 DDC_SCL n/c n/c n/c

Wiring and Device Connections

HDMI INPUTS (3-6)

The HDMI INPUT connectors on the rear panel are used to connect source input devices to the presentation system. The

presentation system routes digital video and audio from connected source input devices to the connected output devices. These

ports support HDMI (with Deep Color) and HDCP 2.2.

NOTE:

When an input sends protected content to a non-HDCP compliant monitor, the video output displays a black screen rather

than a red screen as displayed via Enova DVX Presentation Switchers.

These inputs support 2 CH L-PCM.

The following table describes the pinout conguration of the HDMI INPUTS connectors:

FIG. 29 displays the pin locations for the HDMI pinouts:

FIG. 29 HDMI pinouts

To connect HDMI input source devices (DVI and HDMI) to the HDMI INPUT connectors, the following (optional) adapter cables

are required:

DXLITE INPUTS (7-8)

Two DXLite (RJ-45) connectors transport digital video, embedded audio, and bi-directional control over twisted pair cable to

DXLink devices or boards, including digitally transcoded analog video signals. Both inputs support HDCP 2.2.

NOTE:

When an input sends protected content to a non-HDCP compliant monitor, the video output displays a black screen rather

than a red screen as displayed via Enova DVX Presentation Switchers.

Instruction Manual - Incite Digital Video Presentation Systems

HDMI INPUT Connectors - Pinouts and Signals

Pin Signal Pin Signal

1 TMDS Data 2+ 11 TMDS Clock Shield

2 TMDS Data 2 Shield 12 TMDS Clock-

3 TMDS Data 2- 13 CEC

4 TMDS Data 1+ 14 Reserved, HEC Data

5 TMDS Data 1 Shield 15 SCL

6 TMDS Data 1- 16 SDA

7 TMDS Data 0+ 17 DDC/CEC/HEC Ground

8 TMDS Data 0 Shield 18 +5V Power (max 50mA)

9 TMDS Data 0- 19 Hot Plug Detect, HEC Data+

10 TMDS Clock+

DVI Input Adapter Cables

Name Description Length FG#

HDMI Interface

Cable

HDMI Male to HDMI Male 6 1/2’ (2m) FG10-2178-05

HDMI to DVI Cable HDMI Male to DVI Male 6’ (1.828m) FG10-2179

FIG. 30 AUDIO INPUTS connectors

Source devices require either balanced (dierential) or unbalanced (single-ended) connections. FIG. 31 illustrates options for

wiring between sources and input connectors. More than one option can be used in the same system.

Presentation System

source device

Balanced wiring

Unbalanced wiring

FIG. 31 Stereo 5-terminal wiring

FIG. 32 provides details for wiring from an audio input to a an unbalanced source device that has RCA connectors. Positive and

ground wires connect to the source. You also can use a CC-3.5ST5-RCA2F 2 RCA Female to 5-Pin Phoenix Cable ( ) for FG10-003-20

this type of connection.

Presentation System

source device

FIG. 32 RCA Stereo audio source wiring

CAUTION: Do not connect the negative terminals to the source connector. Doing so can cause damage to your device.

Wiring and Device Connections

AUDIO INPUTS (1-6)

The AUDIO INPUTS connectors are 3.5 mm 5-position captive-wire terminals that can be wired for either balanced (dierential) or

unbalanced (single-ended) stereo audio. Since the NCITE allows independent switching of video and audio, video and audio inputs of

the same number do not have to be connected to the same source equipment. These connectors feature the following specications:

Nominal input level: +4 dBu (1.228 Vrms) balanced or -10 dBu (0.3262 Vrms) unbalanced

Maximum input level: 2 Vrms

Input impedance: >12k ohms unbalanced, >12k ohms balanced, DC coupled FIG. 30 displays the AUDIO INPUTS connectors.

Instruction Manual - Incite Digital Video Presentation Systems

FIG. 33 MIC/LINE INPUTS

RCA output

FIG. 35 AMP OUT CLASS 2 WIRING Output

For standard 8-Ohm speaker loads, connect speakers to the AMP OUT output as displayed in FIG. 36.

Wiring and Device Connections

MIC/LINE INPUTS

Two 3.5mm 3-pin captive-wire MIC/LINE INPUT connectors allow up to two mono microphones to be connected to the presenta-

tion system. Each microphone input supports balanced and unbalanced audio. Each input supports up to 48V of phantom power.

FIG. 33 displays the MIC/LINE INPUTS connectors.

FIG. 34 illustrates wiring connections between the presentation system and a mono RCA output and an XLR output.

NCITE NCITE

XLR output

FIG. 34 RCA (mono) and XLR output wiring

FOR INICTE VERSIONS WITH AMPLIFIER (FG1901-12, FG1901-16):

CAUTION: Never use shielded cable for output wiring.

CAUTION: Never connect the speaker return to the chassis of the Incite, or damage to the device may result.

NOTE: Custom wiring should only be performed by qualied personnel. Class 2 output wiring is required.

AMP OUT

The AMP OUT amplied audio outputs are available only on the NCITE-813A and NCITE-813AC, and each model oers two sepa-

rate wiring options:

The 4-position captive wire connector provides amplied, variable, mono or stereo audio output.

The two 2-position captive wire connectors provide 70V or 100V mono amplied audio output. Connect a speaker to

either the 70V or 100V terminal, but not both simultaneously. FIG. 35 displays the AMP OUT audio output.

FIG. 36 Connecting speakers to the Amplied Audio output

Instruction Manual - Incite Digital Video Presentation Systems

FIG. 38 AUDIO OUTPUTS

Wiring and Device Connections

For mono amplied output, connect a speaker to either the 70V or 100V terminals as displayed in FIG. 37.

FIG. 37 Connecting speakers to the Amplied Audio output (-T models)

AUDIO OUTPUTS

The Line Level audio outputs (ports 1-2) provide balanced or unbalanced, mono or stereo line-level audio output.

FIG. 38 displays the AUDIO OUTPUTS connectors,

Destination devices require either balanced (dierential) or unbalanced (single-ended) connections. FIG. 39 illustrates options

for wiring between output connectors and the destinations.

destination device

NCITE

Balanced wiring

Unbalanced wiring

FIG. 39 Stereo 5-terminal wiring

CAUTION: Do not connect the negative terminals to the source connector. Doing so can cause damage to your device.

Instruction Manual - Incite Digital Video Presentation Systems

FIG. 40 RS-232 ports

The following table lists the pinouts for the RS-232 ports.

FIG. 41 RS-232/422/485 ports

The following table lists the pinouts for the RS-232/422/485 port.

Wiring and Device Connections

Rear Panel Control and Power (NCITE-813AC only)

The following sub-sections describe the control and power components on the rear panel of the NCITE-813AC. These compo-

nents are not featured on the NCITE-813 or NCITE-813A. Refer to FIG. 9 on page 27 for the component layout of the rear panel.

Serial Ports

The NCITE-813AC features device control serial ports that support either RS-232 or RS-232, RS-422, and RS-485 communication

protocols. Each port supports the following specications:

XON/XOFF (transmit on/transmit o)

CTS/RTS (clear to send/ready to send)

300-115,200 baud rate

RS-232 Ports

The RS-232 ports (ports 2-4 on the NCITE-813AC) are 5-pin 3.5 mm male connectors used for connecting

A/V sources and displays. These ports support most standard RS-232 communication protocols for data transmission.

FIG. 40 displays the RS-232 ports for the NCITE-813AC.

In the above table, pin 1 is located on the right side of the port, and the pinouts count up to the left.

RS-232/422/485 Port

The RS-232/422/485 port (port 1) is a 10-pin 3.5 mm male connector used for connecting A/V sources and displays. This port

can be used as a RS-232 port by disabling RS-422 and RS-485 on the ports. By default, RS-422 and RS-485 are disabled on this

port. Only with RS-422/485 disabled will the ports operate as RS-232. See the SET BAUD command and the TSET BAUD com-

mand in the NetLinx Programming chapter of the NX-Series Controllers WebConsole and Programming Guide for more information

on enabling and disabling RS-422 and RS-485 on these ports. These ports support most standard RS-232, RS-422, and RS-485

communication protocols for data transmission.

FIG. 41 displays the RS-232/422/485 port for the NCITE-813AC.

In the above table, pin 1 is located on the right side of the port, and the pinouts count up to the left.

Instruction Manual - Incite Digital Video Presentation Systems

RS-232 Port Pinouts

Pin 1 GND

Pin 2 RXD

Pin 3 TXD

Pin 4 CTS

Pin 5 RTS

RS-232/422/485 Port Pinouts

Pin 1 GND (used in RS-232 and RS-422)

Pin 2 RXD (used in RS-232)

Pin 3 TXD (used in RS-232)

Pin 4 CTS (used in RS-232)

Pin 5 RTS (used in RS-232)

Pin 6 TX+ (used in RS-422 and RS-485)

Pin 7 TX- (used in RS-422 and RS-485)

Pin 8 RX+ (used in RS-422 and RS-485)

Pin 9 RX- (used in RS-422 and RS-485)

Pin 10 +12V

FIG. 42 RELAY connector (male)

8-channel single-pole single-throw relay ports

Each relay is independently controlled

Supports up to 4 independent external relay devices

Channel range = 1-8

Each relay can switch up to 24 VDC or 28 VAC peak @ 1 A

One 8-pin 3.5mm male connector provides relay termination

I/O Port

The I/O port (port 22 on the NCITE-813AC) is a 6-pin 3.5 mm male connector used for connecting logic-level outputs. The I/O

port responds to either switch closures, voltage level (high/low) changes, or it can be used for logic-level outputs.

Each port is capable of being used as an input or an output.

FIG. 43 displays the I/O port for the NCITE-813AC.

FIG. 43 I/O ports

A contact closure between the GND and an I/O port is detected as a Push.

When used for voltage inputs, the I/O port detects a low signal (0 - 1.5 VDC) as a Push, and a high signal (3.5 - 5 VDC) as

a Release. (This I/O port uses 5V logic but can handle up to 12V without harm).

When used for outputs, the I/O port acts as a switch to GND and is rated for 200mA @ 12 VDC.

The NCITE-813AC can use up to 4 I/O ports

The PWR pin provides +12 VDC @ 200 mA and is designed as a power output for the PCS Power Current Sensors, VSS2

Video Sync Sensors (or equivalent).

The GND connector is a common ground and is shared by all I/O ports. A common ground is shared with I/O ports 1-4.

The input impedance on the I/O port is 22k.

Wiring and Device Connections

Relay Port

The relay port (port 21 on the NCITE-813AC) is an 8-pin 3.5 mm male connector used for connecting external relay

devices. You can connect up to 4 independent external relay devices on the NCITE-813AC. When a relay is “OFF”,

terminals A and B are open-circuit. When a relay is “ON”, terminals A and B are shorted together.

Relay Connections

Use connectors A for common and B for output (FIG. 42). Each relay is isolated and normally open.

A metal connector strip is also provided to common multiple relays.

In the above table, pin 1 is located on the right side of the port, and the pinouts count up to the left.

Instruction Manual - Incite Digital Video Presentation Systems

I/O Port Wiring

Specifications

1 GND Signal GND

2 I/O 1 Input/Output

3 I/O 2 Input/Output

4 I/O 3 Input/Output

5 I/O 4 Input/Output

6 12 VDC PWR

FIG. 50 ICSLAN port

The ICSLAN port gets its IP addresses in one or more of the following ways:

IPv4 - Static assignment of the subnetwork address by the user

IPv6 - Link local address

Using the ICSLAN Network

The default IP address for the ICSLAN network is 198.18.0.1 with a subnet mask of 255.255.0.0.

It is important that the ICSLAN and LAN subnets do not overlap. If the LAN port is congured such that its address space over -

laps with the ICSLAN network, the ICSLAN network will be DISABLED.

NOTE:

Typically, the NCITE-813AC communicates with an A/V switcher via ICSLAN. Since the A/V switcher has a static IP address

on the ICSLAN network, and you cannot change the IP address on the switcher, you cannot change the 198.18 subnet information

on the NCITE-813AC platform of processors. You can only change the Host name and DHCP server settings.

DHCP Server

The ICSLAN port has a built-in DHCP server. This DHCP server is enabled by default and will serve IP addresses to any connected

devices set to DHCP mode.

The DHCP server can be disabled from telnet with the command:

SET ICSLAN

The DHCP address range is xed. The server will provide addresses in the range x.x.0.2 through x.x.63.255.

Devices using static IP addresses on the ICSLAN network should be set within the reserved static IP address range of x.x.64.1 to

x.x.255.255.

Opening LAN and ICSLAN Sockets from Code

When opening sockets from NetLinx or Java code there is no mechanism to indicate which network to use. The controller will open

the socket on whichever network has an IP subnet that matches the address provided in the command to open the socket. There

is no indication which network was used, only whether the socket was created successfully.

USB Port

The NCITE-813AC features one Type-A USB port you can use to connect a mass storage device for loading .jar les and IR data

les (.irl), reading or writing conguration les and log les, or updating the rmware on the unit.

NOTE:

This USB port only supports a FAT32 le system.

This USB port (FIG. 51) uses standard USB cabling to connect to any mass storage or peripheral devices.

Wiring and Device Connections

ICSLAN Port

The NCITE-813AC has two types of Ethernet ports: LAN and ICSLAN. The LAN port is used to connect the master to an external

network, and the ICSLAN port is used to connect to other AMX equipment or third-party A/V equipment. The ICSLAN port pro -

vides Ethernet Communication to connected AMX Ethernet Equipment in a way that is isolated from the primary LAN connection.

The ICSLAN port is a 10/100 Port RJ-45 connector and Auto MDI/MDI-X enabled. The NCITE-813AC features one port. The port

supports IPv4 and IPv6 networks, as well as HTTP, HTTPS, Telnet, and FTP.

FIG. 51 USB port

NOTE:

USB hubs are not supported on this port.

Instruction Manual - Incite Digital Video Presentation Systems

Wiring and Device Connections

The LAN port gets its IP address(es) in one or more of the following ways:

IPv4

Static assignment by the user

Dynamic assignment by an IPv4 DHCP server

Link local as a fall back when congured for DHCP but unable to successfully obtain an address

IPv6

Link local address

Prex(es) assigned by a router

Power Connector/Switch

FIG. 56 displays the power switch and connector for the NCITE-813AC.

Power switch

Power cable connector

FIG. 56 Power Connector/Switch/Fuse

CAUTION: This unit should only have one source of incoming power. Using more than one source of power to the device can result

in damage to the internal components and a possible burn out. Apply power to the unit only after installation is complete.

Instruction Manual - Incite Digital Video Presentation Systems

Audio/Video Conguration

Locating the IP Address of the Presentation System

You can locate the IP address of the presentation system by using the buttons on the front panel of the unit. The IP address ap-

pears on the LCD display on the front panel of the device. Perform these steps to locate the IP address of the unit:

1. Press the button on the front panel of the unit. The on-screen menu appears on the connected output display. MENU ON/OFF

2. Use the and navigational arrow buttons to navigate to the Network options. Press and you can see UP DOWN SELECT

the IP address is listed among the network settings. Note the IP address for future reference.

Default User Names and Passwords

The following table lists the default user names and passwords for accessing the NCITE-813AC through NetLinx Studio or the

WebConsole.

Instruction Manual - Incite Digital Video Presentation Systems

Default User Names and Passwords

User Name Password

NetLinx Studio netlinx password

WebConsole administrator password

FIG. 74 System Security Settings

WebConsole - Security Options

Security - General

The General Security Settings page provides global permissions for various options that may be individually selected and applied

to all users. The Master provides 3 levels of security settings presets: Low, Medium, and High. The levels are simply presets of

various security settings. When a preset is selected, the settings are not applied until you click . You can customize any Accept

settings as needed on the security preset before accepting and applying the settings. The default for the settings will match the

Low presets.

System Level Security - System Security Settings

Click the link to access the System Security Details page (FIG. 74). The options in this page allow System Security Settings

you to establish whether the Master will require a valid user name and password be entered prior to gaining access to the cong

uration options.

These are global options that enable or disable the login requirement for both users and roles.

System Security Options

The System Security options are described in the following table:

Instruction Manual - Incite Digital Video Presentation Systems

System Security Options

Option Description

Security Presets The Master provides three levels of security setting presets: Low, Medium, and High. Each level is a preset

of various security settings (see the Security Presets section on page 68 for more information.) When a

preset is selected, that setting is applied after clicking Accept.

NOTE:

If a security preset is not selected, all subordinate options are grayed-out and not selectable, mean-

ing that the Master is completely unsecured and can be altered by any user (regardless of their rights).

Audit Log Select to enable/disable remote syslog. See the Audit Logs section on page 68 for more information.

Banner Display Select to turn on or turn o banner messages. Banners enable you to display pre- and post-login text in

the WebConsole.

See the Banners section on page 69 for more information.

USB Host Port Select to enable all Type-A USB connectors on the Master.

66Instruction Manual - Incite Digital Video Presentation Systems

WebConsole - Security Options

System Security Options (Cont.)

Option Description

Inactivity Timeout Select to enable the Master to log out a user after a dened period of inactivity. After enabling the inactivity timeout op-

tion, use the spin box to set the number of minutes before the timeout activates. You can set a timeout in the range of

1 to 60 minutes. The default setting is 10 minutes. The timeout applies to Program Port, Telnet, SSH, HTTP, and HTTPS

sessions. When the inactivity timeout is enabled, the Master limits the number of concurrent sessions for all non-device

accounts to 10. When the number of active sessions is full, any additional login attempts will fail.

Password Expiration Select to force a user to change its password after a set period of time. After enabling the password expiration options,

use the spin box to set the interval for password expiration. You can set an amount of time in the range of 1 to 180 days.

The default setting is 60 days.

NOTE:

This option is only valid on locally-maintained accounts. When external LDAP is enabled, only the administrator and

device user accounts are aected.

Cryptography

Strength:

Set the cryptography strength of the Master to Low or High. On the High setting, only FIPS 140-2 validated binaries are

used.

Password Complexity Set the password complexity to Low, Medium, or High. When the password complexity level is raised from a lower level

to a higher level, the Master requires conrmation from the user. When the user conrms the change, all passwords are

marked as expired on all local user accounts, and the passwords must be changed to meet the new complexity require-

ments. Password complexity requirements are as follows:

• Low - Minimum length is 4 characters, and must be dierent from previous password.

• Medium - Minimum length is 8 characters, must contain characters from 3 of the following characters sets (uppercase

letters, lowercase letters, numbers, other characters), must contain at least 4 changes from the previous password, and

must be dierent from the previous 10 passwords.

• High - Minimum length is 15 characters, must contain characters from all of the following characters sets (uppercase

letters, lowercase letters, numbers, other characters), must contain at least 8 changes from the previous password, and

must be dierent from the previous 30 passwords.

NOTE:

This option is only valid on locally-maintained accounts. When external LDAP is enabled, only the administrator and

device user accounts are aected.

Lockout Access Select to enable a lock on a user account after a set number of failed logins. When enabled, use the Attempts spin box

to set the number of login attempts allowed. Use the Lockout Duration options menu to indicate the amount of time you

want the lockout to last. The default setting is 60 minutes.

NOTE:

This option is only valid on locally-maintained accounts. When external LDAP is enabled, only the administrator

user is aected.

HTTP/HTTPS Select to enable HTTP and HTTPS access to the Master.

HTTP: The port value used for unsecure HTTP Internet communication between the web browser’s UI and the target

Master. By disabling this port, the administrator (or other authorized user) can require that any consecutive sessions

between the UI and the target Master are done over a more secure HTTPS connection.

By default, the Master does not have security enabled and must be communicated with using http:// in the Address eld.

The default port value is 80.

NOTE:

One method of adding security to HTTP communication is to change the Port value. If the port value is changed,

any consecutive session to the target Master has to add the port value at the end of the address

(within the Address eld). An example is if the port were changed to 99, the new address information would be:

http://192.192.192.192:99.

HTTPS: The port value used by web browser to securely communicate between the web server UI and the target Master.

This port is also used to simultaneously encrypt this data using the SSL certicate information on the Master as a key.

This port is used to communicate securely between the browser (using the web server UI) and the Master using HTTPS

but also provide a port for use by the SSL encryption key (embedded into the certicate). Whereas SSL creates a secure

connection between a client and a server, over which any amount of data can be sent securely, HTTPS is designed to

transmit individual messages securely. Therefore both HTTPS and SSL can be seen as complementary and are congured

to communicate over the same port on the Master. These two methods of security and encryption are occurring simulta-

neously over this port as data is being transferred. The default port value is 443.

NOTE:

Another method of adding security to HTTPS communication would be to change the port value. If the port

value is changed, any consecutive session to the target Master has to add the port value at the end of the address

(within the Address eld). An example is if the port were changed to 99, the new address information would be:

http://192.192.192.192:99.

FIG. 75 Security - Roles page

The options in this page allow authorized users to assign and alter role properties such as creating, modifying, or deleting a role’s

rights, locking a role, and dening the les/directories accessible by a particular role. Locking a role disables the role without

deleting it.

WebConsole - Security Options

Banners

Banners enable you to display pre- and post-login text in the WebConsole and terminal interfaces. Banner les are text les

containing up to 5000 characters in each le. (Any additional characters are discarded.)

NOTE:

Banner les are user-provided and optional. If no les are found, no banner appears.

The following special characters are allowed for use in banner text messages:

! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~

Also allowed are any printable ASCII characters (including “space”): A-Z, a-z, 0-9.

Pre-login banners must be named “banner.txt” and stored in the /user directory on the Master. Post-login banners are obtained

from one or more les in the /user directory. Post-login banner text is a concatenation of the allroles_banner.txt le, followed by

all of the applicable <role>_banner.txt les, where <role> is the name of a dened Role in the system. The applicable les are

those that match the Roles assigned to the user that logged in. If a Role is currently locked, its banner le is not included.

NOTE:

If you load a new “banner.txt” le with new content to the Master, you must reboot the Master to display the new le.

Security - Roles

A Role is a set of privileges or permissions assigned to one or more users. The privileges and permissions can involve various

functions or allow access to specic ports. Any privileges or permissions set for a role are inherited by all users sharing that

role. Multiple roles can be assigned to a user, but at the same time, roles are not required for users. A user can have zero roles

assigned to it.

NOTE:

You cannot assign a permission directly to a user. All user permissions are determined by the Role assigned to the user.

NOTE:

If you have a remote directory such as LDAP enabled, the common name of the LDAP group on the LDAP server must match

the name of the Role assigned to the user on the Master.

Select the option of the Security Page to access the page (FIG. 75). Roles Role Security Details

Instruction Manual - Incite Digital Video Presentation Systems

Specyfikacje produktu

Marka:	AMX
Kategoria:	nieskategoryzowany
Model:	NCITE-813A
Kolor produktu:	Czarny
Wysokość produktu:	44 mm
Szerokość produktu:	483 mm
Głębokość produktu:	356 mm
Liczba kanałów:	8 kan.
Prędkość transferu danych przez Ethernet LAN:	10, 100 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	5 - 85 %
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-10 - 70 °C
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet
Obsługiwane rozdzielczości grafiki:	3860 x 2160,4096 x 2160
Częstotliwość adaptera AC:	50-60 Hz
Napięcie wejściowe adaptera AC:	100-240 V
Maksymalna rozdzielczość filmu:	4096 x 2160 px
Rodzaj złącza audio:	3,5 mm (1/8")