Instrukcja obsługi AMX MXT-1001

AMX monitor MXT-1001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX MXT-1001 (2 stron) w kategorii monitor. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick Start Guide

MXT-1001 10.1" Modero X Series® G5 Tabletop Touch Panel

Overview

In the MXT-1001 10.1” Modero X Series® G5 Tabletop Touch Panel (FG5968-47), the

most elegant interface designed specifically for dedicated room control has been

significantly enhanced to include a new G5 Graphic Engine to provide even faster and

smoother animations and transitions. It also quadruples the processing power with a

new Quad Core Processor. This new generation of touch panels is built for usability

offering edge-to-edge capacitive touch glass with multi-touch capabilities. It features

advanced technology empowering users to operate AV equipment seamlessly, while

providing the ultimate in audio and video quality. The distinctive appearance will

complement even the most sophisticated meeting facilities and homes. With a

lightning fast processor, brilliant graphics and enhanced capabilities, the Modero X

Series is the control surface that simply delivers more.

For more information on installation and configuration, please refer to the

MXT/MXD-1001 Operation Reference Guide, available at www.amx.com.

Common Application

The MXT-1001 is intended for boardrooms, conference rooms, or auditoriums where a

panoramic control surface is needed to provide access to multiple functions

simultaneously while remaining elegantly unobtrusive. In residences, it is perfect for

kitchens, home theaters, or home offices where the panoramic control surface can be

used to manage systems throughout the house.

Features

•G5 Graphics Engine and Quad Core Processing – The most powerful process-

ing in the industry delivers smooth gesturing, animations and transitions all at

higher speeds for an experience any user will enjoy.

•Apps - Modero X Series G5 touch panels now have the ability to run stand-alone

applications (apps) within the control environment.

•Simplified Enterprise Touch Panel Updates – Deploy and update touch panel

files from a network URL for simplified company-wide updates.

•Latest Communication Technologies – Supports Near Field Communication™

(NFC) - short-range wireless technologies that deliver peer-to-peer communica-

tion by 'sharing, pairing and transaction' between RF devices like exchanging

data/identities.

•Enhanced Usability – HD video streaming.

•Perfect From Any Angle – Includes In-Plane Switching (IPS), the latest technol-

ogy in popular tablet/mobile devices that delivers the widest viewing angles and

the most accurate color reproduction on the market.

Product Specifications

Panel Connectors and Wiring

Any USB peripherals (mouse, keyboard, etc.) may be connected to one of the two

USB ports on the rear of the device (FIG. 2). Updates to the device’s firmware are also

made via the USB ports. The 5-pin Micro-USB port is used exclusively for camera

video and microphone output only.

Power via Power Over Ethernet

Power for the MXT-1001 is supplied via Power Over Ethernet (PoE), utilizing an AMX-

certified, capacitive touch-compliant PoE injector such as the PS-POE-AT High Power

PoE Injector (FG423-81) or equivalent PoE device. If using a PoE injector, the PoE

injector should be installed between the MXT-1001 and the incoming Ethernet cable,

and connected to the RJ45 port on the cable attached to the device (FIG. 3).

Ethernet Cable Installation and Modification

In installations where you wish to conceal the Ethernet cable, a hole at least 1.00”

(2.54 cm) in diameter is required in the surface to allow passage of the female RJ45

connector (FIG. 3). If using a smaller hole is unavoidable, you will need to disconnect

the Ethernet cable (ECA5968-05) from the device.

NOTE: The minimum diameter hole through which the Ethernet cable may pass is

0.50" (1.27 cm).

FIG. 1 MXT-1001

MXT-1001 (FG5968-03) Specifications

Power: PoE (Power over Ethernet), 802.3af, class 3

Power Consumption: • Full-On: 12.95 W maximum

•Standby: 5.8 W

•Shutdown: 1 W

Operating Environment: • Operating Temperature: 32° F to 104° F (0° C to 40° C)

• Storage Temperature: 4° F to 140° F (-20° C to 60° C)

• Humidity Operating: 20% to 85% RH

• Humidity Storage: 5% to 85% RH

Dimensions (HWD): 6 14/16” x 9 14/16” x 4 14/16” (174 mm x 252 mm x 124 mm)

Weight: 3.0 lbs (1.36 kg)

Sleep Button

Front Side

NFC

Sensor

Proximity

Sensor

MXT-1001 (FG5968-03) Specifications

Certifications: • UL

• FCC Part 15 Class B

• C-Tick CISPR 22 Class B

• CE EN 55022 Class B and EN 55024

• CB Scheme IEC 60950-1

• IC

• IEC/EN-60950

• RoHS

Included Accessories: • MXT-1001 Installation Guide (93-5968-47)

• MXA-CLK Modero X Series Cleaning Kit (FG5968-16)

• HPG-10 .75-inch HydraPort .75-IN. Grommet (FG570-01)

Other AMX Equipment: • PS-POE-AF-TC, POE Injector, 802.3af Compliant

( )FG423-83

• MXA-USB-C USB Cover Kit (FG5968-18)

• NXA-ENET8-2POE, Gigabit Switch, 8 Port POE, 2 Port

SFP (FG2178-63)

• MXA-MPL, Modero X Series Multi Preview Live

( )FG5968-10

• MXA-MP, Modero X Series Multi Preview (FG5968-20)

• MXA-STMK-10, Secure Table Mount Kit, 10.1" Modero X

Tabletop (FG5968-66)

FIG. 2 Connectors on the rear of the MXT-1001

FIG. 3 Back of the MXT-1001, showing RJ45 port and cable for PoE

Micro-USB

USB Ports Entry for RJ45/

PoE Cable

Port

Speaker

Cable length

edited for clarity

RJ45 Port

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

3/14

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-5968-47 REV: A

To disconnect and reconnect the MXT-1001’s Ethernet cable to allow use of a hole

smaller than 1.00” in diameter:

1. On a soft surface, turn the MXT-1001 face-down to access the bottom of the

device.

2. Remove the clamp holding the Ethernet cable (FIG. 4) until the Ethernet cable

moves freely.

3. Remove the Ethernet cable connector and pull the cable out of the clamp.

4. Pass the Ethernet cable (ECA5968-05) through the hole, with the RJ45

connector on the other side of the installation surface from the device.

5. Press the Ethernet cable back into the clamp. Do NOT tighten the clamp at this

time.

6. Using a nonconductive item such as a wooden stick, reinsert the Ethernet cable

connector into the device. Use the stick to ensure that the connector is properly

seated.

7. Tighten the clamp to secure the Ethernet cable. Make sure the clamp is around

the bundled black cable, not the individual wires.

8. Connect the RJ45 connector to its incoming Ethernet cable and apply power.

Configuring the MXT-1001

The MXT-1001 is equipped with a Settings app that allow you to set and configure

various features on the panel. For more information on connecting and configuring the

MXT-1001 to a network, please refer to the Modero X Series G5 Programming Guide,

available at www.amx.com.

Accessing the Settings App

To access the Settings app on the MXT-1001, press and hold the Sleep Button

(FIG. 1) on the top of the panel for 3 seconds. The user will be prompted to release the

button to enter the Settings app.

Accessing the NetLinx Subpage

1. From the Settings app page, select NetLinx. This opens a password keypad.

2. Enter the panel password into the keypad (the default is 1988) and select OK to

access the subpage.

Setting the Panel’s Device Number and Device Name

In the NetLinx subpage:

1. Press Device Number to open the NetLinx editing window.

2. Enter a unique Device Number assignment for the panel and press OK.

3. Enter a unique Device Name assignment for the panel and press OK.

Accessing the Ethernet Subpage

1. From the Settings app, select Ethernet. This opens a password keypad.

2. Enter the panel password into the keypad (the default is 1988) and select OK to

access the subpage.

Connecting to a Master

The panel requires that you establish the type of connection you want to make

between it and your Master.

In the NetLinx page:

1. Press Mode to toggle through the available connection modes:

2. If you have enabled password security on your Master, you need to set the user-

name and password within the device.

a. Select Username to open the NetLinx editing window.

b. Set your Username and Master Password.

e. Click OK to return to the NetLinx page.

Configuring the Panel to a Network

The first step is to configure the panel’s communication parameters. This only

configures the panel to communicate with a network, and it is still necessary to tell the

panel with which Master it should be communicating.

Network Communication With a DHCP Address

In the Ethernet subpage:

1. Toggle the DHCP/Static field to open the DHCP/Static window. DHCP is the

default setting.This action causes all fields on the Ethernet subpage (other than

Host Name) to be greyed-out.

2. Select Host Name to open the Host Name window. Enter the new host name

and click OK.

Network Communication with a Static Address

In the Ethernet subpage:

1. Toggle the DHCP/Static field to open the DHCP/Static window.

2. Select Static in the window. This opens the Static IP editing window.

3. Click on any field to open either a keypad (for numeric entries) or keyboard (for

alphanumeric entries). To minimize the keypad/keyboard, click the two down-

ward-pointing arrows at the bottom right corner of the screen.

4. Enter your network’s information in the Static IP editing window. To move from

field to field, simply press the next field you wish to edit.

5. When finished, click OK to save your changes and return to the Ethernet sub-

page.

FIG. 4 Bottom of the MXT-700

Ethernet Cable

Connector

Clamp

MXT-1001

Connection Modes

Mode Description Procedures

Auto The device connects to the first

master that responds.

This setting requires that you set

the System Number.

Setting the System Number:

1. Select Master System Number to open

the keypad.

2. Set your Master System Number and

select OK.

URL The device connects to the

specific IP of a master via a TCP

connection.

This setting requires that you set

the Master’s IP.

Setting the Master IP:

1. Select the Master IP number to open the

keyboard.

2. Set your Master IP and select OK.

Listen The device “listens” for the

Master to initiate contact.

This setting requires you provide

the master with the device’s IP.

Confirm device IP is on the Master URL list.

You can set the Host Name on the device

and use it to locate the device on the master.

Host Name is particularly useful in the DHCP

scenario where the IP address can change.

Specyfikacje produktu

Marka:	AMX
Kategoria:	monitor
Model:	MXT-1001
Kolor produktu:	Aluminium, Black
Długość przekątnej ekranu:	10.1 "
Przeznaczenie:	Pionowy
Procesor wbudowany:	Quad Core
Rozdzielczość:	1280 x 800 px
Natywne proporcje obrazu:	16:9
Typ ekranu dotykowego:	Blad
Ekran dotykowy:	Tak
Karta graficzna:	G5 Graphics
Kształt ekranu:	Płaski
NVIDIA G-SYNC:	Nie
AMD FreeSync:	Nie
Jasność:	400 cd/m²
Montaż naścienny / rzutowanie na sufit:	Nie
Technologia touchscreen:	Pojemnościowy