Instrukcja obsługi Ampeg BA-108


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ampeg BA-108 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Owner’s Manual
BA-108, BA-110, BA-112, BA-115 and BA-210
Bass Guitar Combo Amplifiers
BA Series Bass Guitar Combo
2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safe-
ty. If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with a cart,
stand, tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the
cart/apparatus combination
to avoid injury from tip-over.
PORTABLE CART
WARNING
WARNING — To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CAUTION — To prevent electric shock hazard, do not connect
to mains power supply while grille is removed.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. This apparatus shall not be exposed to
dripping or splashing, and no object filled
with liquids, such as vases or beer glasses,
shall be placed on the apparatus.
16. Do not overload wall outlets and
extension cords as this can result in a risk
of fire or electric shock.
17. This apparatus has been designed with
Class-I construction and must be connected
to a mains socket outlet with a protective
earthing connection (the third grounding
prong).
18. The MAINS plug or an appliance
coupler is used as the disconnect device,
so the disconnect device shall remain readily
operable.
19. For the terminals marked with symbol
of may be of sufficient magnitude
to constitute a risk of electric shock. The
external wiring connected to the terminals
requires installation by an instructed person
or the used of ready-made leads or cords.
Disconnect power before fuse replacement.
Replace only with certified/approved fuse of same type,
size and ratings as marked on product.
CAUTION
The lightning flash with arrowhead symbol within an equilateral
triangle means “electric shock hazard”. It is intended to alert
the user to the presence of uninsulated “dangerous” voltage
within the product enclosure, that may be of significant
magnitude to constitute a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The exclamation point within an equilateral triangle means
“Warning/Caution!”. It is intended to alert the user of the
presence of important operating and maintaining (servicing)
instructions in the literature accompanying the appliance.
BA Series Bass Guitar Combo
3
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
•Reorientorrelocatethereceiving 
antenna.
 •Increasetheseparationbetween
the equipment and the receiver.
 •Connecttheequipmentintoanoutlet
on a circuit different from that to which
the receiver is connected.
 •Consultthedealeroranexperienced
radio/TV technician for help.
CAUTION: Changes or modifications to this
device not expressly approved by LOUD
Technologies Inc. could void the user’s
authority to operate the equipment under
FCC rules.
This apparatus does not exceed the
Class A/Class B (whichever is applicable)
limits for radio noise emissions from digital
apparatus as
set out in the radio interference
regulations of the Canadian Department
of
Communications.
Exposure to extremely high noise levels may
cause permanent hearing loss. Individuals
vary considerably in susceptibility to
noise-induced hearing loss, but nearly
everyone will lose some hearing if exposed
to sufficiently intense noise for a period of
time. The U.S. Government’s Occupational
Safety and Health Administration (OSHA)
has specified the permissible noise level
exposures shown in the following chart.
According to OSHA, any exposure in excess
of these permissible limits could result
in some hearing loss. To ensure against
potentially dangerous exposure to high
sound pressure levels, it is recommended
that all persons exposed to equipment
capable of producing high sound pressure
levels use hearing protectors while the
equipment is in operation. Ear plugs or
protectors in the ear canals or over the
ears must be worn when operating the
equipment in order to prevent permanent
hearing loss if exposure is in excess of
the limits set forth here:
Duration, per
day in hours
Sound
Level dBA, Slow
Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Very loud classical music
1.5 102
1 105 The boss screaming at his minions about manual deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste,
according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized
collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have
a possible negative impact on the environment and human health due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective
usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, or your household waste disposal service.


Specyfikacje produktu

Marka: Ampeg
Kategoria: Niesklasyfikowane
Model: BA-108

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ampeg BA-108, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Ampeg

Ampeg

Ampeg SGT-DI Instrukcja

7 Października 2024
Ampeg

Ampeg SVT-210AV Instrukcja

7 Października 2024
Ampeg

Ampeg Venture VB-88 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture VB-410 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture VB-212 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture VB-210 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture V12 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture VB-115 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture V3 Instrukcja

7 Października 2024
Ampeg

Ampeg Venture V7 Instrukcja

7 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024