Instrukcja obsługi Aluratek Handheld Gimbal for Smartphones

Aluratek Niesklasyfikowane Handheld Gimbal for Smartphones

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aluratek Handheld Gimbal for Smartphones (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
CONTENT
●Package List........................................................1
●Disclaimer and Warning.....................................2
●Safety Operation Guidelines...............................4
●USB Connection..................................................7
●Mounting Camera, Checking Balance..................9
●Panel Introduction............................................10
●Operating Mode.................................................11
●Changing Orientation.........................................12
●App Operation, and Bluetooth Connection.......13
●Product Specification.........................................14
●Warranty Card................................................... 15
PACKAGE LIST
The product should be packed with following items (including this user
manual), If you are missing any items or components, please contact your
dealer immediately!
GIMBAL STABILIZER 1×
MICRO USB CABLE 1×
1
User Manual 1×
Thank you for purchasing our Stabilizer. Before you start PLEASE read this manual and become
familiar with Stabilizer’s components and operating modes to ensure proper operation. The
information contains herein affects your safety and your legal rights and responsibility.
Failure to read and follow the instructions and warnings may result in serious injury to you or damage
to your device or property.
By using this product, you hereby signify that you have read this document carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for you conduct while using this product and for any consequences thereof. You agree to
use this product only for purposes that are proper and in accordance with all terms, precautions,
practices, policies and guidelines our company has made and may make available.
Our company accepts no liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of this product. The user shall observe safe and lawful practices including, but
not limited to those set forth herein.
GLOSSARY
The following terms are used throughout the product literature to indicate various levels of potential
harm when operating this product.
■Warning: Procedures, which if not properly followed, may incur property damage, grave accident, or
serious injury.
■CAUTION: Procedures, which if not properly followed, may incur property damage and serious injury.
■NOTICE: Procedures, which if not properly followed, may incur property damage or minor injury.
WARNING:
Read the ENTIRE User guide to become familiar with the features of our Stabilizer before operating.
Failure to operate the product correctly can result in damage to the product or personal property,
and cause serious injury. This is a sophisticated product. It must be operated with caution and
common sense and requires some basic mechanical ability. In-correct Use of product in a safe and
responsible manner could result in injury or damage to the product or other property. This product is
not intended for use by children without direct adult supervision. DO NOT use with incompatible
components or in any way otherwise as mentioned or instructed in the product documents provided
by our company. This Safety Guidelines herein contain instructions for safety, operation and
maintenance. It is essential to read and follow all of the instructions and warnings in the user
manual, prior to assembly, setup or use, in order to operate the product correctly and avoid damage
or serious injury.
2
3
The Stabilizer should be used in temperatures from 0 to 40 .℃ ℃
Use of the battery in environments above 40 ℃can lead to a fire or explosion. Use of battery below
0℃can lead to serious damage.
■CHARING THE BATTERY
1. Always use our company approved charger for charging. Our company takes no responsibility if
the battery is charged using Non-Our company charger.
2. Do not put the stabilizer near flammable materials or on flammable surfaces (such as carpet or
wood). Never leave the battery unattended during charging to prevent any accident.
3. Do not charge the battery immediately after use, when the Stabilizer temperature may be too
high. Do not charge the battery until it cools down to near room temperature .Charging the battery
with its temperature over 40℃or lower than 5℃may lead to leakage, overheating, or battery
damage.
4. Examine the charger and cable before use; make sure there is no damage to the enclosure, cord,
plug, or other parts. Never use a damaged charger. Do not clean the charger with denature alcohol
or other flammable solvents. Never use a damaged charger.
5. The Intelligent Battery will stop charging when it is full. Disconnect the batteries from the charger
when fully charged.
■STORAGE
1. DO NOT leave the Stabilizer near heat sources such as a furnace or heater, or expose inside of a
vehicle on hot days.
2. Store Stabilizer in dry environment, and never store the Stabilizer in any environment with
temperature of over 60℃.
3. Do not leave the Stabilizer unused for too long after it has been completely discharged to prevent
over-discharge of battery which may result in battery damage and permanent damage.
■TRAVEL NOTICE
Discharge the battery power to 5% or lower before carrying the battery on an air flight.
4
■CAUTION:
1. The Stabilizers a high -precision control device, damaged may be caused to stabilizer if it is
dropped or subject to external force, and this many result in malfunction.
2. Make sure the rotation of Stabilizer axes is not blocked by external force when the stabilizer is
power on.
3. 3. The Stabilizer is not waterproof or water-resistant. Prevent contacts of any kind of liquid or
clear with.
Prevent contacts of any kind of liquid or clear with.
It is recommended to use dry cloth for cleaning.
4. Protect the Stabilizer from dust and sand during use.
■NOTICE
1. Hold the Stabilizer’s Handle still in when it is powering up to ensure it starts up successfully.
2. Make sure the batteries are fully charged before each time of use.
3. Discharge the battery to 40%~65% if it will NOT be used for over 10 days. This can greatly extend
the battery life.
4. Charge and Discharge the battery completely once every 3 months to keep it active.
5

Specyfikacje produktu

Marka: Aluratek
Kategoria: Niesklasyfikowane
Model: Handheld Gimbal for Smartphones

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aluratek Handheld Gimbal for Smartphones, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Aluratek

Aluratek

Aluratek AUH100F Instrukcja

4 Października 2024
Aluratek

Aluratek AWCPA01FB Instrukcja

3 Października 2024
Aluratek

Aluratek AULS03F Instrukcja

3 Października 2024
Aluratek

Aluratek AUH200F Instrukcja

26 Września 2024
Aluratek

Aluratek AWAGA01F Instrukcja

26 Września 2024
Aluratek

Aluratek AUPS01F Instrukcja

26 Września 2024
Aluratek

Aluratek AUM01F Instrukcja

26 Września 2024
Aluratek

Aluratek APAP01F Instrukcja

26 Września 2024
Aluratek

Aluratek AWLMC01F Instrukcja

22 Września 2024
Aluratek

Aluratek ABPM02F Instrukcja

20 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024