Instrukcja obsługi Alto Kick 15

Alto głośnik Kick 15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alto Kick 15 (20 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
USER GUIDE
ENGLISH
GUÍA DEL USUARIO
ESPAÑOL
GUIDE D’UTILISATION
FRANÇAIS
GUIDA PER L'USO
ITALIANO
BENUTZERHANDBUCH
DEUTSCH
GEBRUIKERSHANDLEIDING
NEDERLANDS
2
USER GUIDE (ENGLISH)
BOX CONTENTS
Kick15 amplifier; power cable; User Guide; Safety Instructions & Warranty Information Booklet
FEATURES
4-channel mixer with stereo line inputs on each channel and an XLR input on Channel 1
400 Watts of peak power, 200 Watts continuous
15” low-frequency transducer, 1” compression driver
Custom-tuned electronic crossover provides superb frequency response
True bi-amped design provides dedicated power to high and low drivers
Built-in Alesis digital effects processor with reverb, delay, chorus, and more
256 effect presets: 16 effects with 16 variations each
Integrated folding steel kickstand provides the ideal monitoring angle instantly
Level, effects, and high & low EQ controls on all four channels
Stereo RCA input for connecting MP3 players and other audio devices
Footswitch input allows instant activation or bypass of effects
1/4" headphone output with dedicated volume control
Angled speaker baffle for optimized throw
Dual XLR and 1/4" Mix outputs
Ground Lift switch
QUICK SETUP / CONNECTION DIAGRAM
Use the kickstand on the amplifier's rear panel to support the unit
at an ideal monitoring angle. See next page.
*Note: Any items not mentioned under Box Contents are not
included.
Microphone*
Power
Subwoofer*
Synthesizer*
Power
Power
Footswitch*
Loudspeaker* Loudspeaker*
3
KICKSTAND
Use the kickstand on the amplifier's
rear panel to support the unit at an
ideal monitoring angle.
TOP PANEL
10 11 1
423
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
8 9
1. POWER SWITCH Turns the amplifier on/off. Make sure the MAIN VOL and
HEADPHONES VOLUME knobs are set to "zero" before turning it on. The LED above this
switch illuminates when the amplifier is on.
2. HEADPHONES OUTPUT – Connect your 1/4" stereo headphones here.
3. HEADPHONES VOLUME Turn this knob to adjust the level of the HEADPHONE
OUTPUT.
4. MAIN VOL – Turn this knob to adjust the amplifier's main volume.
5. CHANNEL LEVEL Turn this knob to adjust the level of the corresponding channel.
6. CHANNEL HIGH EQ Turn this knob to adjust the level of the channel's high frequencies
(treble).
7. CHANNEL LOW EQ Turn this knob to adjust the level of the channel's low frequencies
(bass).
8. CHANNEL FX Turn this knob to adjust how much of the currently selected effect is
applied to the channel.
9. EFFECT PRESETSTurn this knob to select an effect.
10. EFFECT VARIATIONS – Turn this knob to select different variations of the selected effect.
11. FX LEVEL Turn this knob to adjust how much of the currently selected effect is applied
to the entire mix.


Specyfikacje produktu

Marka: Alto
Kategoria: głośnik
Model: Kick 15

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Alto Kick 15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Alto

Alto

Alto Tourmax SX 115 Instrukcja

3 Października 2024
Alto

Alto Busker Instrukcja

29 Września 2024
Alto

Alto Uber LT Instrukcja

22 Września 2024
Alto

Alto TX212 Instrukcja

12 Września 2024
Alto

Alto TX208 Instrukcja

9 Września 2024
Alto

Alto TS 112 W Instrukcja

5 Września 2024
Alto

Alto TS312 Instrukcja

3 Września 2024
Alto

Alto TS415 Instrukcja

2 Września 2024
Alto

Alto TS310 Instrukcja

1 Września 2024
Alto

Alto Black15 Instrukcja

1 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik