Instrukcja obsługi Alpine X800D-S906

Alpine nawigator X800D-S906

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alpine X800D-S906 (84 stron) w kategorii nawigator. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/84
R
R
R
R
R
FOR CAR USE ONLY/NUR FÜR AUTOMOBILGEBRAUCH/POUR APPLICATION AUTOMOBILE
UNIQUEMENT/SOLO PARA USO EN AUTOMÓVILES/PER IL SOLO UTILIZZO IN AUTOMOBILE
EN
DE
FR
ES
IT
PREMIUM INFOTAINMENT SYSTEM
X800D-S906
Installation Manual
Einbauanleitung
Manuel d'installation
Manual de instalación
Manuale di installazione
AUDIO NAV
1-EN
EN
Before installing or connecting the unit, please read
the following thoroughly for proper use.
WARNING
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical
shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to prevent
obstructions when driving. Cables or wiring that obstruct or hang up
on places such as the steering wheel, shift lever, brake pedals, etc. can
be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment.
Doing so will exceed the current carrying capacity of the wire and
result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions so
as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a
physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc. and
results in serious accident.
DO NOT OBSTRUCT AIRBAGS OR ANY OTHER SAFETY
RELEVANT PARTS OF THE VEHICLE WHILE INSTALLING
THE PRODUCT.
Doing so may lead to failure of the vehicle's safety systems and
results in severe injury or death. If you are unclear where such parts
are located, please review your car's user manual or contact your car
manufacturer.
CAUTION
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical skill
and experience. To ensure safety, always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not securely
install the unit in place. This may cause parts to become loose
resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wire's insulation from being cut by the
metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of moisture
or dust. Moisture or dust that penetrates into this unit may result in
product failure.
PRECAUTIONS
Be sure to disconnect the cable from the (–) battery post before
installing your X800D. This will reduce any chance of damage to
the unit in case of a short-circuit.
Be sure to connect the colour coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage
to the vehicle's electrical system.
When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the X800D to the fuse box, make sure the
fuse for the intended circuit of the X800D has the appropriate
amperage. Failure to do so may result in damage to the unit and/or
the vehicle. When in doubt, consult your Alpine dealer.
WARNING


Specyfikacje produktu

Marka: Alpine
Kategoria: nawigator
Model: X800D-S906

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Alpine X800D-S906, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nawigator Alpine

Alpine

Alpine X903D-V447 Instrukcja

8 Października 2024
Alpine

Alpine X903D-F Instrukcja

6 Października 2024
Alpine

Alpine NVE-N077P Instrukcja

4 Października 2024
Alpine

Alpine INE-Z928E Instrukcja

2 Października 2024
Alpine

Alpine NVE-N077PS Instrukcja

2 Października 2024
Alpine

Alpine INE-W928R-NS Instrukcja

23 Września 2024
Alpine

Alpine NVE-N055PV Instrukcja

22 Września 2024
Alpine

Alpine TRUCK-G500C Instrukcja

16 Września 2024
Alpine

Alpine INA-W910R Instrukcja

10 Września 2024
Alpine

Alpine CDE-203BT Instrukcja

7 Września 2024

Instrukcje nawigator

Najnowsze instrukcje dla nawigator

TomTom

TomTom VIA 1510 Instrukcja

14 Października 2024
Sanyo

Sanyo NVM-4030 Instrukcja

14 Października 2024
TomTom

TomTom GO 950 Instrukcja

14 Października 2024
Garmin

Garmin GPSMAP 86s Instrukcja

12 Października 2024
TomTom

TomTom Start 52 Instrukcja

12 Października 2024
TomTom

TomTom Go Instrukcja

10 Października 2024