Instrukcja obsługi Alcatel Sigma 260 Voice DUO
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alcatel Sigma 260 Voice DUO (4 stron) w kategorii telefon. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
USER'S GUIDE
ATLINKS Europe, 22 quai Gallieni 92150 Suresnes – France
Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and
used under license by Atlinks.
Phone Function Keys
Base station
HANDSET LOCATOR button
Press to page handsets.
Press and hold to start registration procedure.
What’s on the display?
A Display Icons
B Displays when in menu mode to confirm your selection.
C Indicates that more options are available.
Use the UP / DOWN keys to scroll up / down.
D Displays when in menu mode.
Select BACK to return to the previous menu level.
Select BACK to delete the last digit / character entered.
What the icons mean?
Read First Before Use
Choosing a site for the base unit and charger pod
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
will need to insert a microfilter between the telephone and the telephone
line, otherwise you may get interference between the telephone and the
broadband, which could cause problems.
Battery safety - CAUTION
ONLY use the rechargeable batteries supplied with the handset.
DO NOT use non-rechargeable batteries - they may explode and cause
damage to your telephone.
Only use rechargeable batteries with exactly the same specifications as those
supplied with the product.
Using non-rechargeable or non-conforming batteries can damage the product
and could pose a health hazard (see “Technical details”).
Failure to comply with this recommendation will invalidate the manufacturer's
warranty.
Batteries can split or leak if incorrectly inserted, opened or exposed to heat.
Never dispose of batteries in a fire: they could explode.
Installation and Set-up
Precautions
The signal quality will depend on the location and environment of the base
and handset. Position your Sigma 110 / Sigma 260 away from sources of
excessive heat (radiators, direct sunlight, etc.) and protect it from
vibrations and dust. Never allow your telephone to come into contact with
water or other liquids, or with aerosols. To reduce the risk of interference
and optimize reception, take particular care not to install the base in the
immediate vicinity of windows, large metal objects, reinforced concrete,
televisions, music centres, VCR or DVD players, halogen lamps or heating
devices, fluorescent lighting, burglar alarms, microwave ovens, computers,
etc.
This telephone requires an electrical power supply in order to function.
To clean your Sigma 110 / Sigma 260, use an antistatic cloth lightly
moistened with water.
NB: Your Sigma 110 / Sigma 260 is a DECT™* standard appliance
designed to receive and transmit telephone calls. It is designed for
connection to the public telecommunications network.
Fit the rechargeable batteries in each handset
1) Install the AAA batteries (Brand name: CORUN, Capacity: Ni-MH 1.2V/
400mAh, or Brand name: SANIK, Capacity: Ni-MH 1.2V / 400mAh) into
handset in accordance with the polarity marked in the battery
compartment.
2) Close the battery compartment cover, sliding it into place and pressing
firmly to make sure it is secure.
Connecting AC (electrical) power
1. Plug the base adaptor cord into the power jack on rear panel of the
base and the other end into a 100-240 Vac 50-60Hz electrical outlet.
2. Connect telephone line cord into the phone jack on rear panel of the
base and the other end into a main socket.
3. In case of twin or triple system, plug the charger power adaptor cord into
the power jack on rear panel of charger and the other end into a
100-240 Vac 50-60Hz electrical outlet.
Before you use the cordless handset for the first time, it’s important to
charge the batteries fully.
Leave the handset on the charging cradle for 15 hours.
CAUTION: Use only the power supply that came with this unit. Using other
power supplies may damage the unit.
Base and charger power adaptor :
S003IV0600050 100-240V 6V DC 500mA
S003IV0600015 100-240V 6V DC 150mA
Add/edit direct access memory
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK PHONEBOOK
key to select.
3. Press NAVIGATION key to select . and then press OK DIRECT MEM
key to select.
4. Press NAVIGATION key to select or and then press OK KEY 1 KEY 2
key.
The stored name is displayed, or if it is empty.NO NUMBER
If there is no number stored for the selected key or if you want to
change the name or number currently stored, press MENU key to
enter direct memory menu to add/edit the name or number.
5. Press NAVIGATION key to select and then press OK EDIT NUMBER
key to select. The display shows the currently stored name, or
ENTER NAME if there is no number stored. Edit or enter the name
you want and then press OK key. The display shows the currently
stored number, or if there is no number stored. ENTER NUMBER
Edit or enter the number you want and then press OK key to confirm.
A confirmation beep is played.
Delete direct access memory
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK PHONEBOOK
key to select.
3. Press NAVIGATION key to select . and then press OK DIRECT MEM
key to select.
4. Press NAVIGATION key to select or and then press OK KEY 1 KEY 2
key.
The stored name is displayed (or if it is already empty).NO NUMBER
5. Press MENU key to enter direct memory menu.
6. Press NAVIGATION key to select and then press OK key toDELETE
select.
Press OK key again to confirm. A confirmation beep is played.
Using the redial list
The redial list stores the last 5 numbers dialed.
Access redial list
1. Press REDIAL key in idle mode and press NAVIGATION key to
browse the redial list. The last number dialed will appear first in the
redial list.
2. Press OK key to view the details of the selected entry.
Save a redial number into the phonebook
1. Press REDIAL key in idle mode to go to the redial list.
2. Press NAVIGATION key to select an entry.
3. Press MENU key to display SAVE NUMBER, then press OK key to
display . Enter the name of the contact (maximum 12 ENTER NAME
characters) and then press OK key to save the entry, and return the
display to the redial list.
Using the call log
To receive Caller ID you may need to contact your telephone service
provider, and they will inform you also of any charges for it. Caller ID lets
you see the phone numbers of your callers on the handset display,
before answering and in your Call Log afterwards. The Call Log stores
the last 10 external calls, whether or not you answered the call, so you
can call them back later.
Only the most recent call is saved if there are repeat calls from the same
number. When the Call Log is full, the next new call will replace the
oldest entry.
If you've got a new call in the Call Log, will appear on the handset
display.
If the received number is the same as one in your phonebook, the name
from the phonebook will display as well as the number.
If a call is from someone who withheld their number, the display will
show .WITHHOLD ID
If the call is from someone whose number is unavailable, or if you have
not subscribed to Caller ID but have set the date and time, the display
will show when it is received and CALLING UNAVAILABLE in the Call
Log.
Access call log
Press in idle mode and press NAVIGATION key to browse the call list.
The calls are displayed in chronological order with the most recent call
at the top of the list.
Press OK key to display more details of the call, including the date and
time.
Save call list entry into the phonebook
1. Press in idle mode to go to the call list.
2. Press NAVIGATION key to select an entry and then press MENU key.
3. Press NAVIGATION key to select SAVE NUMBER and then press OK
key to select. (Enter the name of the contact (maximum 12 characters)
and then press OK key to confirm.)
Delete a Call Log entry
1. Press in idle mode to go to the call list.
2. Press NAVIGATION key to select an entry and then press MENU key.
3. Press NAVIGATION key to select and then press OK key to DELETE
select. (Press OK key again to confirm. A confirmation beep is played.)
Delete all entries in the Call Log
1. Press in idle mode to go to the call list.
2. Press MENU key.
3. Press NAVIGATION key to select and then press OK DELETE ALL
key to select. (Press OK key again to confirm. A confirmation beep is
played.)
Access phonebook
1. Press in idle mode to browse the phonebook entries. Alternatively,
you can press MENU key, to display and then press OK.PHONEBOOK
2. Press NAVIGATION key to select and then press OK key to confirm.LIST
The phonebook entries will be listed in alphabetical order, and you can
press NAVIGATION key to scroll through the stored entries.
3. Press OK key to view the details of the selected entry.
Note: Instead of pressing NAVIGATION key to browse the phonebook
entries, you can press the numeric key corresponding to the first letter of
the entry you wish to locate.
Modify a phonebook entry
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK key PHONEBOOK
to select.
3. Press NAVIGATION key to select and then press OK key EDIT ENTRY
to select.
4. Press NAVIGATION key to select an entry to edit and then press OK key.
The current name is displayed.
Edit the name and then press OK key to confirm.
5. Edit the number and then press OK key to confirm. A confirmation beep
is played.
Delete a phonebook entry
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK keyPHONEBOOK
to select.
3. Press NAVIGATION key to select and then press OK key toDELETE
select.
4. Press NAVIGATION key to select an entry to delete and then press OK
key.
5. Press OK key again to confirm. A confirmation beep is played.
Delete all entries from the phonebook list
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK key PHONEBOOK
to select.
3. Press NAVIGATION key to select and then press OK key DELETE ALL
to select.
4. Press OK key again to confirm. A confirmation beep is played.
Direct access memory
There are 2 direct access memories (Keys 1 & 2) in addition to the
phonebook memory. A long press on the keys in idle mode will
automatically dial the stored phone number.
Use handsfree (only for Sigma 260)
Press TALK key at any moment in normal talk mode to talk in handsfree
mode.
To deactivate the handsfree mode, press again the TALK key to talk in
normal talk mode.
Adjust the earpiece volume
During a call, press NAVIGATION key to select from VOLUME 1 to
VOLUME 3.
Mute/unmute microphone
When the microphone is muted, the handset displays , and your MUTE ON
caller cannot hear you.
During a call, press the MUTE key to turn on/off the microphone.
Your Telephone Operations
Switching on/off
Press and hold the HANG-UP/EXIT key for more than 2
seconds to switch on/off the handset in idle mode.
Notes: When the handset is OFF, it cannot be used for making calls
including emergency calls. There will be no ringing during an incoming call.
To answer a call, you will need to switch it back on. It may take some time
for the handset to re-establish a radio link with the base unit.
To lock/unlock the keypad
Press and hold the STAR key for 1 second to lock/unlock the
keypad in idle mode.
Note: Incoming calls can still be answered even if the keypad was locked.
Set time and date
Note: If you subscribe to the Caller Display service, the time and date will
be set automatically when you receive a call, but you may still need to set
the correct year.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK CLOCK&ALARM
key to select.
3. Press OK key to select DATE/TIME. The last stored date is displayed.
Enter the current date (YY-MM-DD), press OK, then enter the time
(HH-MM).
Change your handset’s name
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK PERSONAL SET
key to select.
3. Press NAVIGATION key to select and then press OK HANDSET NAME
key to select. The current handset name is displayed.
4. Press BACK/CLEAR key to delete the characters one by one.
Enter the new name (maximum 10 characters) and press OK key to
confirm.
A confirmation beep is played.
Change the display language
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK PERSONAL SET
key to select.
3. Press NAVIGATION key to select and then press OK key LANGUAGE
to select.
4. Press NAVIGATION key to your desired language and press OK key to
confirm. A confirmation beep is played.
Note: Once the display language is set, the option menus on the handset
will switch to display in the selected language immediately.
Make and answer calls
Make a callPredialling
Dial the number (maximum 24 digits) and then press TALK key.
Direct dialling
Press TALK key to take the line and then dial the number
(maximum 24 digits).
Call from redial list
Press REDIAL key in idle mode.
Press NAVIGATION key to select an entry in the redial list and
then press TALK key.
Call from the call log
Press in idle mode.
Press NAVIGATION key to select an entry in the call list and
then press TALK key.
Note: You need to subscribe to Caller Line Identification service to be able
to see the caller’s number or name in the call log.
Call from the phonebook
Press in idle mode.
Press NAVIGATION key to select an entry in the phonebook and
then press TALK key.
Answer and end a call
1. When the phone rings, press TALK key. You can also use handsfree
mode thanks to a long press on TALK key (only on Sigma 260).
2. To end a conversation, press HANG-UP/EXIT key.
IMPORTANT NOTE: You can simply place the handset back on its base
station or charger pod to end the call.
Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
Press HANDSET LOCATOR key located at the back of the base
station. All the registered handsets start to ring.
Once retrieved, press any key on the handset or the HANDSET
LOCATOR key again to end the paging.
Call waiting
If you have subscribed to Call Waiting service, the earpiece will emit a
beep tone to inform you that there is a second incoming call. The number
or name of the second caller will also be displayed on your phone if you
have subscribed to Caller Line Identification service (CLI). Please contact
your network provider for more information on this service.
Using your phonebook
Your phone can store up to 50 phonebook memories.
How to enter characters?
When you select a field in which you can enter text, you can enter the
letters that are printed on the keys by pressing the relevant key once or
several times.
For example, press once to insert the letter ‘A’, press twice to
insert the letter B, and so on... Spaces and other symbols can be entered
using or .
Store a contact in the phonebook
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press OK key PHONEBOOK
to select.
3. Press OK key again to enter .NEW ENTRY
4. Enter the name of the contact (maximum 12 characters).
To edit, press BACK/CLEAR key to delete the last character entered.
Press OK key to confirm the name entry.
5. Enter the number of the contact (maximum 24 digits) and then press OK
key to confirm. A confirmation beep is played.
Unpacking your phone
In the box you will find:
the cordless handset (two handsets with a Twin system, and three
with a Triple system)
WKHEDVHXQLW
WZRUHFKDUJHDEOHEDWWHU\FHOOVIRUHDFKKDQGVHW
DEDWWHU\FRPSDUWPHQWFRYHUIRUHDFKKDQGVHW
DWHOHSKRQHOLQHFDEOHIRUWKHEDVHXQLW
DPDLQVSRZHUOHDGDQGDGDSWHUIRUWKHEDVHXQLW
FKDUJHUSRGVHDFKZLWKDQDWWDFKHGPDLQVSRZHUOHDGDQGDGDSWHU
for multihandset system
Before you start to use your telephone make sure that all batteries are
fully charged for 15 hours.
Important note: This telephone is not designed for Emergency calls
when the mains power fails.
For Emergency calls you should have a basic phone that operates
without mains power, connected to your line so that you can make calls
during a power failure.
1OK / Menu key
Press to select the function displayed on the handset screen directly
above it.
Press to access the main menu.
2Back / Mute key
Press to delete a digit / a character in editing mode
Press to return to idle mode.
Press and hold to change the handset idle display between handset
name and date / time.
Press to mute / unmute the handset microphone.
3Navigation key
Press UP to access the call log* and press DOWN to access the
phonebook when in idle mode.
Press UP / DOWN to increase or decrease earpiece volume during a call.
Press to increase or decrease the ringer volume.
Press UP / DOWN to increase or decrease handsfree volume
(Sigma 260 only)
Scroll up / down a list.
4Talk key
Press to accept or make a call
Press to activate handsfree mode (Sigma 260 only)
5Hang-up / Exit key
Press and hold to switch the handset power on / off .
Press to end a call.
Press to return to idle mode in other menus.
6Call transf er / Intercom key
Press to initiate an internal call.
Press to hold the line and page another handset during a call.
Press and hold to initiate a conference call.
7Recall (Flash) key
Access to operator services*
8Redial key
Press to access the Redial list.
9Star key
Press and hold to lock / unlock keypad.
Press and hold to toggle between the external and internal calls when both are set up.
10 Hash key
Press and hold to insert a pause during a call.
Press and hold to turn the ringer on / off.
*Subject to subscritption and availability of the service from the f ixed line operator.
Indicates battery is fully charged.
Indicates battery is fully discharged.
Indicates that an external call is connected or held.
Icon blinks when receiving an incoming call.
Indicates you have a new Voice Mail message*.
Indicates you have new missed calls*, or the call log is being viewed.
Displays when the phonebook is accessed.
Displays when the alarm clock is activated.
Displays when handsfree is activated (Sigma 260 only).
Displays when ringer volume is turned off.
Indicates that the handset is registered and within range of the base station.
Icon blinks when the handset is out of range or is searching for a base.
Displays when in menu mode to confirm your selection.
Indicates that more options are available.
Use the UP / DOWN keys to scroll up / down.
Displays when in menu mode.
Select BACK to return to the previous menu level.
A
B D
C
1
7
4
3
9
5
2
6
10
8
Troubleshooting
If you have difficulty with your phone, please try the suggestions listed
below.
As a general rule, if a problem occurs, remove the batteries from all the
handsets in your installation for about 1 minute, then disconnect and
reconnect the power supply to the base and reinstall the handset batteries.
Always :check first that
Everyday use
“I cannot make or answer
calls”
You have followed all the steps listed in the user
manual to install and set up your telephone.
All connectors are firmly inserted in their sockets.
Mains power to the base unit is switched on at the
socket.
The handset’s batteries are correctly and securely
installed and are not run down.
If the handset’s display is blank, it may have been
switched off. Press and hold the HANG-UP/EXIT
key to switch it back on.
Check that the base unit’s mains power adapter is
plugged in and power is switched on.
The base unit needs mains power for normal
operation of the phone - not just for charging the
batteries.
Make sure you are using the telephone line cable
supplied with your telephone. Other telephone line
cables might not work. Move the handset closer to
the base unit.
Check the battery level symbol on the display. If it
is low, replace the handset on the base unit or
charger pod to recharge the batteries.
Switch off power at the mains socket, wait for a
short time and then switch back on. This may
solve the problem.
“I cannot make a call”
“When I press on the
keys, nothing happens”
“When I key in a number,
it appears on the display,
but I cannot make an
outside call”
“The phone does not
ring”
“I hear ‘beeps’ from my
handset while I’m on a
call”
“When I try to make a call,
I hear busy tone”
“The volume in the
earpiece is low when I’m
on a call”
If the handset display shows KEYS LOCKED,
press and hold the * button to unlock it before you
make a call.
Only one handset (or the base unit) can be
connected to the outside line at a time. If another
handset is already using the line, you need to wait
until it has finished its call.
Make sure the batteries are fitted in your handset
If the Battery Level symbol on the display shows
‘low’, put your handset back on the cradle to
charge.
Try a different position for the base unit –
somewhere higher if possible, or further from
other electrical equipment.
Try moving the handset closer to the base unit.
Check that the base unit’s mains power adapter
is plugged in and power is switched on.
Check that ring volume is not on OFF.
You may be going out of range of the base unit.
Move closer or your call may be cut off.
Check the Battery Level symbol on the display. If
it’s low, recharge the batteries.
If you’re using a multi-handset system, check
whether another handset is already on a call.
Make sure you’re holding the earpiece correctly
over your ear.
Adjust the volume using the UP/DOWN key.
Batteries
“The handset’s battery
cells are running low
within an hour or two”
“I try to recharge the
batteries but I still get a
warning that they are
low”
If the fault persists...
Before you first use the handset, you should have
left it on the base unit or charger pod for 15 hours
to charge the batteries fully. You may need to
replace the batteries. Check the connection
between the base unit and the mains power
socket unit.
You need to replace the batteries. Dispose of
used batteries safely – never burn them, or put
them where they could get punctured. Do not use
non-rechargeable batteries in your handset – they
may explode, causing damage.
Disconnect all other instruments connected to the
same line and try to make a call.
Disconnect the base unit from the telephone line
and plug a different phone into the master
telephone socket. Try making a call. If this works,
the line is OK.
If the call does not work, and you are using a
two-way socket adapter, remove it and plug a
telephone directly into the socket.
If the call now works, the adapter may be faulty. If
you cannot make a call, the fault may be on the
exchange line. Contact the service provider.
The store where you bought your telephone can also provide you with
information and after-sales support.
Set alarm tone
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press CLOCK&ALARM
OK key to select.
3. Press NAVIGATION key to select ALARM TONE and then press OK
key to select.
4. Press NAVIGATION key to select MELODY 1 MELODY 2, or
MELODY 3 and then press OK key to confirm. A confirmation beep is
played.
Advanced use of your telephone
Change Master PIN
The Master PIN is used for registration/unregistration of handsets.
The default Master PIN number is 0000. The maximum length of the
Master PIN is 8 digits.
Note: If you forget your PIN code, you can reset it to its default 0000
using a handset Reset (see section Reset Unit).
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select ADVANCED SET and then press
OK key to select.
3. Press NAVIGATION key to select and then press OK CHANGE PIN
key to select.
Enter the current Master PIN when prompted and then press OK key to
confirm.
As you enter the PIN it will be shown as asterisks (*) on the screen.
(Enter the new PIN and then press OK key to confirm. A confirmation
beep is played.)
Register your handset
IMPORTANT: When you purchase a telephone, all handsets are already
registered to the base, so you do not need to register them. Handset
registration is only necessary when you buy extra handsets or if a
handset has become faulty.
The procedure described below is for Sigma 110 or Sigma 260.
They may be different if you want to register another handset model, in
which case you should refer to its user guide.
Additional handsets must be registered to the base unit before you can
use them. Up to 4 handsets can be registered to one base station.
The Master PIN is required before you can register or unregister
handsets.
By default, the Master PIN is 0000.
On the base station, press and hold the HANDSET LOCATOR key for
approximately 5 seconds.
5. Press NAVIGATION key to select or and then press OK key ON OFF
to confirm. A confirmation beep is played.
Activate/deactivate auto hang-up
This function enables you to end a call automatically by simply placing
the handset on the base station. By default, the Auto Hang up feature is
ON.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select PERSONAL SET and then press
OK key to select.
3. Press NAVIGATION key to select AUTO HANG-UP and then press
OK key to select.
4. Press NAVIGATION key to select or and then press OK key ON OFF
to confirm. A confirmation beep is played.
Set date/time format
You can set your preferred date/time format for your phone. The default
format is DD/MM and 24 HOURS.
Set time format
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press CLOCK&ALARM
OK key to select.
3. Press NAVIGATION key to select SET FORMAT and then press OK
key to select.
4. Press OK key to enter TIME FORMAT. The current setting is displayed.
5. Press NAVIGATION key to select or and then12 HOURS 24 HOURS
press OK key to confirm. A confirmation beep is played.
Set date format
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press CLOCK&ALARM
OK key to select.
3. Press NAVIGATION key to select SET FORMAT and then press OK
key to select.
4. Press NAVIGATION key to select DATE FORMAT and then press OK
key to select. The current setting is displayed.
5. Press NAVIGATION key to select or and then press DD/MM MM/DD
OK key to confirm. A confirmation beep is played.
Set alarm
The handset has an alarm clock feature, and when the alarm is set,
the is shown on the handset display.
When the alarm time is reached, the display flashes -- -- and the ALARM
alarm melody is played for 1 minute or until any handset key is pressed.
If the alarm is set for ON DAILY and the alarm will sound again on the
next day.
If the alarm was set for ON ONCE, the will be turned off.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select and then press CLOCK&ALARM
OK key to select.
3. Press NAVIGATION key to select and then press OK key to ALARM
select.
4. Press NAVIGATION key to select , or OFF ON ONCE ON DAILY and
then press OK key to confirm.
If you select or ON ONCE ON DAILY, enter the time (HH-MM) for the
alarm and press the UP/DOWN key to select AM or PM if the time is
in 12 HOURS format.
5. Press OK key to confirm. A confirmation beep is played.
1. On the handset, press MENU key to enter menu selection.
2. Press NAVIGATION key to select ADVANCED SET and then press OK
key to select.
3. Press NAVIGATION key to select REGISTRATION and then press OK
key to select.
Note: If no action is taken on the handset within 10 seconds, the
registration procedure will be aborted. If this happens, repeat the first step.
WAITING is displayed on the screen. A confirmation beep is played to
indicate successful registration, and the handset will return to idle mode,
with its handset number displayed.
Note: If no base is found within a certain period, will be NO BASE
displayed with an error tone to indicate failed registration and the handset
returns to idle mode, and you will need to repeat the registration sequence.
Unregister your handset
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select ADVANCED SET and then press OK
key to select.
3. Press NAVIGATION key to select and then press OK keyUNREGISTER
to select.
4. Enter the Master PIN when prompted and then press OK key to confirm.
(the default master PIN is 0000)
5. Press NAVIGATION key to select the handset number to unregister and
then press OK key to confirm.
A confirmation beep is played to indicate successful unregistration.
Note: If no action is taken on the handset within 15 seconds, the
unregistration procedure will be aborted and the handset returns to idle
mode.
You must use another handset to unregister handsets from the base.
Change recall time
You may need the R button to send a Recall signal (also called Flash or
Timed Break Recall) if you are connected to a PBX. You should normally
leave the Recall Time at its default setting of Short (100ms), as this is the
standard recall required in the telephone network, but it can be changed to
Medium (270ms) or Long (600ms) if your telephone is connected to a PBX
that requires a different recall time.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select ADVANCED SET and then press OK
key to select.
3. Press NAVIGATION key to select RECALL TIME and then press OK
key to select.
4. Press NAVIGATION key to select , or and then SHORT MEDIUM LONG
press OK key to confirm. A confirmation beep is played.
Reset unit
You can reset your phone to its default settings with this feature.
Note: Upon reset, all your personal settings, call log and redial list entries
will be deleted and the phone will return to its default settings. However,
your phonebook will remain unchanged after reset.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select ADVANCED SET and then press OK
key to select.
3. Press NAVIGATION key to select and then press OK key to RESET
select.
4. Press OK key again to confirm. A confirmation beep is played and the
unit is reset to its default settings.
* Value may vary according to environment.
** Depending on initial battery charge.
Technical details
Free field range
Indoor range
Handset battery life
(average values)
Number of handsets
Intercom mode
Three -way confere
(1 outside correspondent +
2 internal correspondents)
Electrical connection /
Base mains adapter /
Charger
Telephone connection
Batteries
Operating temperature
Up to 300 meters*
Up to 50 meters*
7 hours talktime**
100 hours standby**
Up to 4
Yes
Yes
Base: S003IV0600050
Charger: S003IV0600015
Input: 100-240 V / 50-60 Hz
Output: 6V DC / 500mA(BASE)
6V DC / 150mA (Charger)
Only use the adapters supplied with the
telephone.
Single-phase AC, excluding IT installations
defined by the EN 60950 standard. Caution:
the network voltage is classified as a hazard
by the criteria of this standard.
Appliance designed for connection to a
TNV3 class (telecommunications network
voltage) analogue telephone line as defined
by the EN 60950 standard.
Corun / Sanik – AAA – 1.2 V – 400mAh
Only use the batteries supplied with the
telephone.
Using any other type of battery presents a
risk of explosion.
Used batteries must be disposed of in
compliance with current environmental
protection regulations.
From 5 to 40° C
Safety
In the event of an electrical hazard, the mains adapter acts as 230V
power isolating device. It should therefore, as a precaution, be installed
close to the appliance and be easily accessible. To disconnect the
device from the primary power source, the mains adapter must be
removed from the 230V AC/50 Hz socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure,
telephones that use cordless handsets will not work.
You will then be unable to make or receive calls in the event of an
emergency.
This is why we recommend that you also keep a conventional telephone
– one that doesn’t require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing in
the vicinity of the leak.
It is recommended that you avoid using this device during electrical
storms.
Do not attempt to open the batteries, as they contain chemical
substances.
In the event of leakage, avoid contact with the skin, eyes, nose and
mouth.
In the event of contact, rinse the affected part for about twenty minutes
with running water and seek urgent medical attention.
Clean the product with absorbent paper or a dry cloth and contact your
reseller for replacement batteries.
ATLINKS hereby declares that the following models conform to the
essential requirements and other applicable provisions of European
directive 1999/5/EC.
Sigma 110 / Sigma 110 Duo / Trio
Sigma 260 / Sigma 260 Duo / Trio
Model Sigma 110 / 110 Duo / Trio
Sigma 260 / 260 Duo / Trio G2c
A/W No. : 10000576 Rev.1 (EN)
Made in China
ATLINKS, 22 quai Gallieni 92150 Suresnes – France
S.A.S. (Simplified Joined Stock Company) with capital of 500 000 Euros
- Registration number: 508 823 747 R.C.S. Nanterre.
© ATLINKS 2012 - Reproduction prohibited.
The manufacturer reserves the right to modify the specifications of its
products in order to make technical improvements or comply with new
regulations.
ALCATEL and ATLINKS are registered trademarks.
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent and
used under license by ATLINKS.
Press TALK key on the called handset to answer the internal
call, where both internal callers can talk. Intercom is
established.
Press and hold INT key for 2 seconds on the first handset to
start the three-party conference.
CONFERENCE will be displayed on the screen once the conference call
is established.
Handset Tone
Set the ring volume
There are 5 ringer volume options (OFF, LEVEL 1, LEVEL 2, LEVEL 3
and LEVEL 4). The default level is LEVEL 2.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select PERSONAL SET and then press
OK key to select.
3. Press NAVIGATION key to select HANDSET TONE and then press
OK key to select and show . Press the OK key again RING VOLUME
to select.
4. Press NAVIGATION key to your desired volume level and then press
OK key to confirm. A confirmation beep is played.
Set the ring melody
There are 10 ring melodies available on your handset.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select PERSONAL SET and then press
OK key to select.
3. Press NAVIGATION key to select HANDSET TONE and then press
OK key to select.
4. Press NAVIGATION key to select RING TONES and then press OK to
select.
5. Press NAVIGATION key to your desired melody and then press OK
key to confirm. A confirmation beep is played.
Activate/deactivate key tone
A single tone is emitted when a key is pressed. You can enable or
disable the key tone. By default, the key tone is ON.
1. Press MENU key to enter menu selection.
2. Press NAVIGATION key to select PERSONAL SET and then press
OK key to select.
3. Press NAVIGATION key to select HANDSET TONE and then press
OK key to select.
4. Press NAVIGATION key to select KEY BEEP and then press OK to
select.
Using the intercom
Intercom, call transfer and conference are only possible with at least 2
handset registered to the same base station. It allows you to make free
internal calls, transfer external calls from one handset to another, and
set up a 3-way conference with two handsets and an external call.
If you try to make a call while another handset is already on an external
call, you'll hear a busy tone for a few seconds before the display returns
to idle.
Intercom another handset
Press INT key in idle mode.
Intercom is established immediately if there are only 2
registered handsets.
If there are more than 2 registered handsets, the handset numbers
which are available for intercom, and a * will be displayed. Press the
specific handset number you wish to call, or press to ring all
handsets, to start intercom.
Transfer an external call to another handset
During the call, press INT key to put the external call on hold
(the caller can no longer hear you).
Intercom is established immediately if there are only 2 registered
handsets.
If there are more than 2 registered handsets, the handset numbers
which are available for intercom, and a * will be displayed. Press the
specific handset number you wish to call, or press to ring all
handsets, to start intercom.
Press TALK key on the called handset to answer the internal
call, where both internal callers can talk. Intercom is
established.
Press HANG-UP/EXIT key on the first handset to transfer the
external call to the called handset. The external call is
transferred.
Note: If there is no answer from the called handset, press INT key to
resume the external call.
Answer an external call during intercom
During intercom, a new call tone is emitted when there is an incoming
external call.
Press TALK key to answer the external call and end the
intercom.
Connection with the external call is established.
Note: To put the internal call on hold and answer the incoming external
call, press INT key.
Switch between an internal and external call
During the call, press key to switch between an internal
orexternal call.
Establish a three-party conference call
The conference call feature allows one external call to be shared with
two handsets (in intercom). The three parties can share the conversation
and no additional network subscription is required.
During an external call, press INT key to put the external call
on hold (the caller can no longer hear you).
If there are more than 2 registered handsets, the handset numbers
which are available for intercom will be displayed. Press the specific
handset number you wish to call to start intercom.
ENVIRONMENT
This symbol means that your inoperative electronic appliance
must be collected separately and not mixed with the household
waste. The European Union has implemented a specific
collection and recycling system for which producers are responsible.
This appliance has been designed and manufactured with high quality
materials and components that can be recycled and reused. Electrical
and electronic appliances are liable to contain parts that are necessary
in order for the system to work properly but which can become a health
and environmental hazard if they are not handled or disposed of in the
proper way. Consequently, please do not throw out your inoperative
appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the
appropriate local collection point or leave it with the vendor when buying
a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact your
service provider.
Keen to preserve the environment, ATLINKS has equipped this appliance
with a switching power supply, offering better energy efficiency.
The advantages include not only very low electricity consumption, but
also a more compact format than the conventional power supply units
used by the previous range.
The used batteries from your telephone (if it has batteries) must be
disposed of in compliance with current environmental protection
regulations.
Comply with your local regulations.
Return your batteries to your reseller or dispose of them at an approved
recycling centre.
Help us protect the environment in which we live!
www.alcatel-home.com
Specyfikacje produktu
| Marka: | Alcatel |
| Kategoria: | telefon |
| Model: | Sigma 260 Voice DUO |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Alcatel Sigma 260 Voice DUO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje telefon Alcatel
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
5 Października 2024
5 Października 2024
29 Września 2024
27 Września 2024
21 Września 2024
20 Września 2024
Instrukcje telefon
- telefon Sony
- telefon Yamaha
- telefon Samsung
- telefon AEG
- telefon LG
- telefon Motorola
- telefon Xiaomi
- telefon MyPhone
- telefon Huawei
- telefon Pioneer
- telefon Philips
- telefon Plantronics
- telefon SilverCrest
- telefon Realme
- telefon Xblitz
- telefon Gigaset
- telefon Roland
- telefon Geemarc
- telefon Nokia
- telefon Infiniton
- telefon Panasonic
- telefon Crestron
- telefon Asus
- telefon TRENDnet
- telefon Audioline
- telefon Marquant
- telefon D-Link
- telefon Alcatel-Lucent
- telefon Yealink
- telefon GE
- telefon Blaupunkt
- telefon Profoon
- telefon Siemens
- telefon Evolveo
- telefon Grundig
- telefon Honor
- telefon Cisco
- telefon Scosche
- telefon ZTE
- telefon Lindy
- telefon MaxCom
- telefon Bang & Olufsen
- telefon Flex
- telefon ZyXEL
- telefon Linksys
- telefon Oricom
- telefon Oppo
- telefon Dartel
- telefon Vimar
- telefon Krüger&Matz
- telefon Marshall
- telefon Uniden
- telefon Netgear
- telefon Thomson
- telefon AVM
- telefon BT
- telefon Pyle
- telefon CTA Digital
- telefon Apple
- telefon Sennheiser
- telefon Jabra
- telefon Vtech
- telefon Emporia
- telefon TriStar
- telefon Bogen
- telefon Avaya
- telefon AirLive
- telefon EnGenius
- telefon SPC
- telefon Planet
- telefon NEC
- telefon Prestigio
- telefon LevelOne
- telefon Telefunken
- telefon Oregon Scientific
- telefon OnePlus
- telefon Olympia
- telefon Hama
- telefon Marmitek
- telefon MXL
- telefon Sagemcom
- telefon Clarity
- telefon HTC
- telefon Akuvox
- telefon CAT
- telefon Hitachi
- telefon Cortelco
- telefon AVerMedia
- telefon RCA
- telefon Trevi
- telefon Lexibook
- telefon Topcom
- telefon Grandstream
- telefon Sencor
- telefon Binatone
- telefon Allview
- telefon Oukitel
- telefon XD Enjoy
- telefon Snom
- telefon Tecdesk
- telefon KPN
- telefon Swissvoice
- telefon Fenton
- telefon Lewitt
- telefon Fysic
- telefon Wiko
- telefon Aastra
- telefon Amplicomms
- telefon AGFEO
- telefon Amplicom
- telefon Archos
- telefon Ascom
- telefon Proximus
- telefon BeeWi
- telefon GPO
- telefon Fortinet
- telefon Doro
- telefon Sagem
- telefon Sunstech
- telefon Sylvania
- telefon Patton
- telefon Jacob Jensen
- telefon Nordmende
- telefon Blackberry
- telefon Steren
- telefon Envivo
- telefon Belgacom
- telefon Auerswald
- telefon ArtDio
- telefon Teledex
- telefon Valcom
- telefon Switel
- telefon Chacon
- telefon RugGear
- telefon Innovaphone
- telefon AT&T
- telefon Sweex
- telefon Hagenuk
- telefon Essentiel B
- telefon Logicom
- telefon Peaq
- telefon MT Logic
- telefon Mitel
- telefon Fanvil
- telefon Spectralink
- telefon Gigaset Pro
- telefon Vogtec
- telefon VXi
- telefon Tiptel
- telefon Unify
- telefon Edenwood
- telefon Telstra
- telefon Premier
- telefon OpenVox
- telefon CSL
- telefon HUMANTECHNIK
- telefon Polycom
- telefon Primare
- telefon Syco
- telefon SMC
- telefon Legrand
- telefon Digium
- telefon Davolink
- telefon KONFTEL
- telefon Mitsai
- telefon Clear Sounds
- telefon ALLO
- telefon On-Q
- telefon Canyon
- telefon Tecno
- telefon Olitech
- telefon Dopod
- telefon Hamlet
- telefon Sedna
- telefon Cubot
- telefon AudioCodes
- telefon 3Com
- telefon British Telecom
- telefon CyberData Systems
- telefon Bintec-elmeg
- telefon Wantec
- telefon Algo
- telefon Future Call
- telefon 4family
- telefon FlyingVoice
Najnowsze instrukcje dla telefon
14 Października 2024
14 Października 2024
13 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024