Instrukcja obsługi Aigis CAM468CH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aigis CAM468CH (8 stron) w kategorii Bewakingscamera. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
3
Set screw for
back-focus ring
Back-focus ring
1/4-20 Tapped hole
for Mounting Screw
Figure 4
Figure 1
Components & Specifications
Product ID Camera Type Resolution / Imager Input Voltage Max Power
CAM 468CH Color Hi-Res 540TVL, 1/3” CCD 12VDC / 24VAC ± 10%, 60Hz < 3W
CAM 468DN Day/Night 540TVL, 1/3” CCD 12VDC / 24VAC ± 10%, 60Hz < 3.5W
CAM 586WD Wide Dynamic 540TVL, 1/3” DPS 12VDC / 24VAC ± 10%, 60Hz < 4W
Accessories
C/CS mount adapter
1/16” Allen wrench
4-pin auto-iris connector jack
(see diagram at right)
General Camera Setup Procedure
1. Remove the unit from its packaging. Remove the
cover cap from the front of the camera.
2. The camera is equipped with a standard CS-mount.
Optional C-Mount adapter included.
3. Screw the lens firmly onto the lens mount.
4. Attach the 4-pin plug connector from the lens into the
4-pin jack in the body of the camera.
a. An unwired 4-pin is included in the hardware kit. Use this connector if the lens wires terminate as
flying leads. Refer to the chart below Figure 1 and the lens installation manual for wiring information.
5. Mount the camera in the desired location using either of the 1/4-20 tapped holes on the top and bottom of the
camera (see Figure 4).
6. Once mounted and oriented as desired, power the unit as follows:
a. If powering the camera with 12VDC, connect the +12v wire (typically red) into the leftmost contact
and -12v wire (typically black) into the middle contact (see Figure 2).
b. If powering the camera with 24VAC, the two power wires are interchangeable. Connect one to the
leftmost contact and one to the center contact (see Figure 3).
7. Once the unit is powered, a red LED will begin glowing below the power connector.
8. The BNC jack on the rear of the camera provides the video output feed. Connect a test monitor (or any
monitor that accepts BNC video input) to this jack to adjust the zoom and focus settings.
Pin Video Iris
Lens
DC Iris
Lens
1 Power Damp -
2 Null Damp +
3 Video Drive +
4 Ground Drive -
Figure
2
Wired for 12 VDC
Red = +12vdc (hot)
Black = -12vdc (ground)
Figure
3
Wired for 24 VAC
Wires are interchangeable
when powering the unit with
24VAC.
Red
wire
Black
wire
Depress the central
button to insert the power

Specyfikacje produktu

Marka: Aigis
Kategoria: Bewakingscamera
Model: CAM468CH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aigis CAM468CH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Bewakingscamera Aigis

Aigis

Aigis D5WD211R-W Instrukcja

21 Września 2024
Aigis

Aigis D3PWD211 Instrukcja

20 Września 2024
Aigis

Aigis CAM586WD-212 Instrukcja

20 Września 2024
Aigis

Aigis CAM468CH Instrukcja

20 Września 2024
Aigis

Aigis D5CH211P-W Instrukcja

19 Września 2024
Aigis

Aigis PTZA6-1P23H Instrukcja

19 Września 2024
Aigis

Aigis PTZA6-1W23H Instrukcja

19 Września 2024
Aigis

Aigis D5WD211P-W Instrukcja

19 Września 2024
Aigis

Aigis MLA2WD211 Instrukcja

18 Września 2024
Aigis

Aigis HC1CH30-6 Instrukcja

18 Września 2024

Instrukcje Bewakingscamera

Najnowsze instrukcje dla Bewakingscamera

Axis

Axis ExCam XF P1367 Instrukcja

21 Września 2024
Axis

Axis 209MFD Instrukcja

21 Września 2024
Axis

Axis P3225-VE Mk II Instrukcja

21 Września 2024
Axis

Axis Q6054-E MK II Instrukcja

21 Września 2024
Axis

Axis Q6155-E 50Hz Instrukcja

21 Września 2024
Intellinet

Intellinet NFC30-IR Instrukcja

21 Września 2024
Axis

Axis T94S01L Instrukcja

21 Września 2024
Laxihub

Laxihub F1 Instrukcja

21 Września 2024
EverFocus

EverFocus EDN1220/6 Instrukcja

21 Września 2024