Instrukcja obsługi Aidapt VP177


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aidapt VP177 (26 stron) w kategorii Różnorodny. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/26
EN
Aluminium 4-Wheeled Rollator
Usage and Maintenance Instructions
Usage and Maintenance Instructions Ver.3 09/2013 (2634)
2
INTRODUCTION
Thank you for choosing the Aidapt Four-Wheeled Rollator.
Our four-wheeled rollator, as with all our products, is manufactured from high-quality
materials.
N.B. This equipment must be installed by a competent person.
VP176/VP176A/VP176AB Red Aluminium Rollator 132 kg (21 st.) weight limit
VP177/VP177A/VP177AB Blue Aluminium Rollator 132 kg (21 st.) weight limit
VP178/VP178A/VP178AB Silver Aluminium Rollator 132 kg (21 st.) weight limit
Do not exceed the weight limit stated – doing so could put the user at risk.
INTENDED USE
Your Aidapt Rollator has been designed to assist you when walking and carrying small items
of shopping using the bag provided. The bag was designed specifically to fit your rollator,
please only use the bag supplied for your Aidapt Rollator. Do not use or combine bags and/
or baskets from other manufacturers.
When not in use, you can simply fold the Aidapt Rollator and store away until you require it
next. The Aidapt range of tri-walkers and rollators are designed to be used both inside and
outside the home.
FEATURES
User friendly loop brakes with lock
Simple brake cable adjustment
Soft plastic solid wheels
Swivelling front wheels
Folding locking mechanism
Height adjustable
User friendly ergonomic side locking
wheels for height adjustment
Ergonomic handgrips to reduce pressure
Fig. 1
ASSEMBLY INSTRUCTIONS
1. Carefully remove all packaging, including the cardboard tubes covering the
knurled tube part of the brake assembly. Check the product thoroughly for damage
or obvious faults.
If you suspect the unit to be faulty, please do not use, but contact your
supplier immediately for service.
Usage and Maintenance Instructions Ver.3 09/2013 (2634)
3
2. Extend the rollator fully , and check that the side bars are straight and level.
Carefully insert the brake assembly with pre-punched extension tube (Fig. 3) within
the frame.
3. At the required height (there are several holes) insert the fixing screw through the
hexagonal hole in the frame, and pass through the hole in the handlebar tube,
place the curved plastic washer over the end of the screw, with the curved side
facing the tube. Fix the screw in place with the locking handwheel (Fig. 3b).
4. Make sure that the handwheel is tightened sufficiently so that the brake tubes will
not move accidentally.
5. After setting the height, check that both brakes are even in height and that the
rollator is sitting even onto the ground.
6. Fix the brake cables into the integral brake cable ‘U’ clip welded onto the frame if
not already assembled (Fig. 3a).
7. Prior to use make sure brakes are adjusted correctly and working properly. See
section ‘OPERATING THE BRAKES’ and ‘ADJUSTMENT’.
Fig. 3 Fig. 3a
Fig. 3b


Specyfikacje produktu

Marka: Aidapt
Kategoria: Różnorodny
Model: VP177

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aidapt VP177, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Różnorodny Aidapt

Instrukcje Różnorodny

Najnowsze instrukcje dla Różnorodny