Instrukcja obsługi AEG IKE84441XB

AEG Płyta indukcyjna IKE84441XB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AEG IKE84441XB (161 stron) w kategorii Płyta indukcyjna. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/161
USER
MANUAL
IKE84441XB
User Manual 2
Benutzerinformation 20
Notice d'utilisation 41
Gebruiksaanwijzing 62
Manual de instrucciones 82
Brugsanvisning 103
Käyttöohje 121
Bruksanvisning 140
EN
DE
FR
NL
ES
DA
FI
SV
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading
to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
CONTENTS
1. SAFETY INFORMATION................................................................................................ 2
2. SAFETY INSTRUCTIONS.............................................................................................. 4
3. INSTALLATION...............................................................................................................7
4. PRODUCT DESCRIPTION.............................................................................................8
5. DAILY USE....................................................................................................................10
6. HINTS AND TIPS..........................................................................................................14
7. CARE AND CLEANING................................................................................................ 16
8. TROUBLESHOOTING.................................................................................................. 16
9. TECHNICAL DATA....................................................................................................... 18
10. ENERGY EFFICIENCY...............................................................................................19
11. ENVIRONMENTAL CONCERNS................................................................................19
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
for any injuries or damage that are the result of incorrect
2 ENGLISH
installation or usage. Always keep the instructions in a safe
and accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved. Children of less than 8 years of age and
persons with very extensive and complex disabilities shall
be kept away from the appliance unless continuously
supervised.
Children should be supervised to ensure that they do not
play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
WARNING: Keep children and pets away from the
appliance when it operates or when it cools down.
Accessible parts become hot during use.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
1.2 General Safety
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire
blanket.
WARNING: The appliance must not be supplied through an
external switching device, such as a timer, or connected to
a circuit that is regularly switched on and off by a utility.
ENGLISH 3
CAUTION: The cooking process has to be supervised. A
short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can get
hot.
Do not use the appliance before installing it in the built-in
structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do
not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains. In
case the appliance is connected to the mains directly using
junction box, remove the fuse to disconnect the appliance
from power supply. In either case contact the Authorised
Service Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to the
appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Keep the minimum distance from other
appliances and units.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
4 ENGLISH
Seal the cut surfaces with a sealant to
prevent moisture from causing swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance next to a door
or under a window. This prevents hot
cookware from falling from the appliance
when the door or the window is opened.
Each appliance has cooling fans on the
bottom.
If the appliance is installed above a
drawer:
Do not store any small pieces or
sheets of paper that could be pulled
in, as they can damage the cooling
fans or impair the cooling system.
Keep a distance of minimum 2 cm
between the bottom of the appliance
and parts stored in the drawer.
Remove any separator panels installed in
the cabinet below the appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric shock.
All electrical connections should be made
by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to a socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and electric
shock.
Remove all the packaging, labelling and
protective film (if applicable) before first
use.
This appliance is for household (indoors)
use only.
Do not change the specification of this
appliance.
Make sure that the ventilation openings
are not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to “off” after each
use.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet
hands or when it has contact with water.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance
ENGLISH 5
from the power supply. This to prevent an
electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it may
splash.
WARNING!
Risk of fire and explosion
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
WARNING!
Risk of damage to the appliance.
Do not keep hot cookware on the control
panel.
Do not put a hot pan cover on the glass
surface of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron, aluminium or
with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
2.4 Care and cleaning
Clean the appliance regularly to prevent
the deterioration of the surface material.
Switch off the appliance and let it cool
down before cleaning.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects.
2.5 Service
To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
Concerning the lamp(s) inside this product
and spare part lamps sold separately:
These lamps are intended to withstand
extreme physical conditions in household
appliances, such as temperature,
vibration, humidity, or are intended to
signal information about the operational
status of the appliance. They are not
intended to be used in other applications
and are not suitable for household room
illumination.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Contact your municipal authority for
information on how to dispose of the
appliance.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to
the appliance and dispose of it.
6 ENGLISH
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information below from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
3.3 Connection cable
The hob is supplied with a connection
cable.
To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may only be
replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood, please
see the installation instructions of the hood
for the minimum distance between the
appliances.
min.
50mm
min.
500mm
If the appliance is installed above a drawer,
the hob ventilation can warm up the items
stored in the drawer during the cooking
process.
46
25
min. 55
766
550
516
490+1 750+1
max R5
min. 1500
33575
min.
12
min.
60
min.
28
Find the video tutorial "How to install your
AEG Induction Hob - Worktop installation" by
typing out the full name indicated in the
graphic below.
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your AEG
Induction Hob - Worktop installation
ENGLISH 7
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
1 1 1
2
1
1Induction cooking zone
2Control panel
4.2 Control panel layout
7 852 43
9
1
12 1011
6
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
Sensor
field
Function Comment
1ON / OFF To activate and deactivate the hob.
2Lock / Child Safety Device To lock / unlock the control panel.
3Pause To activate and deactivate the function.
4Bridge To activate and deactivate the function.
5- Heat setting display To show the heat setting.
6- Timer indicators of cooking zones To show for which zone you set the time.
7- Timer display To show the time in minutes.
8 ENGLISH
Sensor
field
Function Comment
8Hob²Hood To activate and deactivate the manual mode of the
function.
9- To select the cooking zone.
10 / - To increase or decrease the time.
11 PowerBoost To activate the function.
12 - Control bar To set a heat setting.
4.3 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
Pause operates.
Automatic Heat Up operates.
PowerBoost operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐
ual heat.
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
4.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the
indicator is on, there is a risk of
burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators / / appear when a
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
for the neighbouring cooking zones even
if you are not using them,
when hot cookware is placed on cold
cooking zone,
when the hob is deactivated but the
cooking zone is still hot.
ENGLISH 9
The indicator disappears when the cooking
zone has cooled down.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
all cooking zones are deactivated,
you do not set the heat setting after you
activate the hob,
you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
you use incorrect cookware. The symbol
comes on and the cooking zone
deactivates automatically after 2 minutes.
you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting The hob deactivates
after
, 1 - 3 6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
5.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the control
bar until you reach the correct heat setting.
5.4 Using the cooking zones
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of the
cookware automatically.
You can cook with large cookware placed on
two cooking zones at the same time. The
cookware must cover the centres of both
zones but not go beyond the area marking. If
the cookware is located between the two
centres, Bridge function will not be activated.
10 ENGLISH
5.5 Bridge
The function operates when the
pot covers the centres of the two
zones.
This function connects two left side cooking
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function: touch . To set or
change the heat setting touch one of the
control sensors.
To deactivate the function: touch . The
cooking zones operate independently.
5.6 Automatic Heat Up
Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at the
desired heating setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch ( comes on). Immediately
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
5.7 PowerBoost
This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
Refer to “Technical data”
chapter.
To activate the function for a cooking
zone: touch . comes on.
To deactivate the function: change the
heat setting.
5.8 Timer
Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch of the
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch to set
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch to set the
cooking zone. Touch or .
To deactivate the function: touch to set
the cooking zone and then touch . The
remaining time counts down to . The00
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch .
CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch of the
timer. appears. When the indicator of the
cooking zone starts to flash, the time counts
up. The display switches between and the
counted time (in minutes).
To see how long the cooking zone
operates: touch to set the cooking zone.
The indicator of the cooking zone starts to
ENGLISH 11
flash. The display shows how long the zone
operates.
To deactivate the function: touch and
then touch or . The indicator of the
cooking zone disappears.
Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows .
To activate the function: touch and then
touch or of the timer to set the time.
When the time finishes, an acoustic signal
sounds and flashes.00
To stop the sound: touch .
The function has no effect on the
operation of the cooking zones.
5.9 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are locked.
The function does not stop the timer
functions.
Press to activate the function.
comes on. The heat setting is lowered to
1.
To deactivate the function: press . The
previous heat setting comes on.
5.10 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch . The
previous heat setting comes on.
When you deactivate the hob,
you also deactivate this function.
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds. comes on. Deactivate
the hob with .
To deactivate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds. comes on. Deactivate
the hob with .
To override the function for only one
cooking time: activate the hob with .
comes on. Touch for 4 seconds. Set the
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with the function operates again.
5.12 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob. Touch for 3 seconds.
The display comes on and goes out. Touch
for 3 seconds. or comes on. Touch
of the timer to choose one of the
following:
- the sounds are off
- the sounds are on
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to you can hear
the sounds only when:
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control panel.
5.13 Power management
If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
12 ENGLISH
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
When you finish cooking and
deactivate the hob, the hood fan
may still operate for a certain
period of time. After that time the
system deactivates the fan
automatically and prevents you
from accidental activation of the
fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually.
To do that touch when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually. When you press you
raise the fan speed by one. When you reach
an intensive level and press again you will
set fan speed to 0 which deactivates the
hood fan. To start the fan again with fan
speed 1 touch .
To activate automatic operation
of the function, deactivate the
hob and activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones a
strong electro-magnetic field
creates the heat in the cookware
very quickly.
Use the induction cooking zones with
suitable cookware.
The bottom of the cookware must be as
thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware material
cast iron, steel, enamelled steel,correct:
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
aluminium, copper, brass,not correct:
glass, ceramic, porcelain.
Cookware is suitable for an induction hob
if:
water boils very quickly on a zone set to
the highest heat setting.
a magnet pulls on to the bottom of the
cookware.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than the
minimum receives only a part of the
power generated by the cooking zone.
For both safety reasons and optimal
cooking results, do not use cookware
larger than indicated in "Cooking zones
specification". Avoid keeping cookware
close to the control panel during the
cooking session. This might impact the
functioning of the control panel or
accidentally activate hob functions.
Refer to "Technical data".
6.2 The noises during operation
If you can hear:
14 ENGLISH
crack noise: cookware is made of different
materials (a sandwich construction).
whistle sound: you use a cooking zone
with a high power level and the cookware
is made of different materials (a sandwich
construction).
humming: you use a high power level.
clicking: electric switching occurs.
hissing, buzzing: the fan operates.
The noises are normal and do not indicate
any malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the cooking
zone deactivates before the count down
timer sounds. The difference in the operation
time depends on the heat setting level and
the length of the cooking operation.
6.4 Examples of cooking
applications
The correlation between the heat setting of a
zone and its consumption of power is not
linear. When you increase the heat setting, it
is not proportional to the increase of the
consumption of power. It means that a
cooking zone with the medium heat setting
uses less than a half of its power.
The data in the table is for
guidance only.
Heat setting Use to: Time
(min)
Hints
- 1 Keep cooked food warm. as neces‐
sary
Put a lid on the cookware.
1 - 3 Hollandaise sauce, melt: butter, choco‐
late, gelatine.
5 - 25 Mix from time to time.
1 - 3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on.
3 - 5 Simmer rice and milkbased dishes,
heat up ready-cooked meals.
25 - 50 Add at least twice as much liquid as
rice, mix milk dishes halfway through
the procedure.
5 - 7 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons of liquid.
7 - 9 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750 g of po
tatoes.
7 - 9 Cook larger quantities of food, stews
and soups.
60 - 150 Up to 3 l of liquid plus ingredients.
9 - 12 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts.
as neces‐
sary
Turn halfway through.
12 - 13 Heavy fry, hash browns, loin steaks,
steaks.
5 - 15 Turn halfway through.
14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
6.5 Hints and Tips for Hob²Hood
When you operate the hob with the function:
Protect the hood panel from direct
sunlight.
Do not spot halogen light on the hood
panel.
Do not cover the hob control panel.
Do not interrupt the signal between the
hob and the hood (e.g. with the hand, a
cookware handle or a tall pot). See the
picture.
The hood in the picture is only exemplary.
ENGLISH 15
Other remotely controlled
appliances may block the signal.
Do not use any such appliances
near to the hob while Hob²Hood
is on.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which
work with this function refer to our consumer
website. The AEG cooker hoods that work
with this function must have the symbol .
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
Clean the hob after each use.
Always use cookware with a clean base.
Scratches or dark stains on the surface
have no effect on how the hob operates.
Use a special cleaner suitable for the
surface of the hob.
Use a special scraper for the glass.
7.2 Cleaning the hob
melted plastic,Remove immediately:
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns. Use a
special hob scraper on the glass surface
at an acute angle and move the blade on
the surface.
Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
Remove shiny metallic discoloration:
use a solution of water with vinegar and
clean the glass surface with a cloth.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem Possible cause Remedy
You cannot activate or operate
the hob.
The hob is not connected to an elec‐
trical supply or it is connected incor
rectly.
Check if the hob is correctly connected
to the electrical supply.
16 ENGLISH
Problem Possible cause Remedy
The fuse is blown. Make sure that the fuse is the cause of
the malfunction. If the fuse is blown
again and again, contact a qualified
electrician.
You do not set the heat setting for
10 seconds.
Activate the hob again and set the
heat setting in less than 10 seconds.
You touched 2 or more sensor fields
at the same time.
Touch only one sensor field.
Pause operates. Refer to "Daily use".
There is water or fat stains on the
control panel.
Clean the control panel.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds when
the hob is deactivated.
You put something on one or more
sensor fields.
Remove the object from the sensor
fields.
The hob deactivates. You put something on the sensor
field .
Remove the object from the sensor
field.
Residual heat indicator does not
come on.
The zone is not hot because it oper‐
ated only for a short time or the sen‐
sor is damaged.
If the zone operated sufficiently long to
be hot, speak to an Authorised Service
Centre.
Hob²Hood does not work. You covered the control panel. Remove the object from the control
panel.
You use a very tall pot which blocks
the signal.
Use a smaller pot, change the cooking
zone or operate the hood manually.
Automatic Heat Up does not op‐
erate.
The zone is hot. Let the zone become sufficiently cool.
The highest heat setting is set. The highest heat setting has the same
power as the function.
The heat setting changes be‐
tween two levels.
Power management operates. Refer to "Daily use".
The sensor fields become hot. The cookware is too large or you put
it too near to the controls.
Put large cookware on the rear zones,
if possible.
There is no sound when you
touch the panel sensor fields.
The sounds are deactivated. Activate the sounds. Refer to "Daily
use".
comes on. Child Safety Device or Lock oper‐
ates.
Refer to "Daily use".
comes on. There is no cookware on the zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer to "Hints
and tips".
The diameter of the bottom of the
cookware is too small for the zone.
Use cookware with correct dimen‐
sions. Refer to "Technical data".
ENGLISH 17
Problem Possible cause Remedy
and a number come on. There is an error in the hob. Deactivate the hob and activate it
again after 30 seconds. If comes
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
You can hear a constant beep
noise.
The electrical connection is incor‐
rect.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model IKE84441XB PNC 949 597 305 00
Typ 62 D4A 01 AA 220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW Made in Germany
Ser.Nr. ................. 7.35 kW
AEG
9.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
PowerBoost [W] PowerBoost
maximum dura‐
tion [min]
Cookware diame
ter [mm]
Left front 2300 3200 10 125 - 210
Left rear 2300 3200 10 125 - 210
Middle front 1400 2500 4 125 - 145
Right rear 2300 3600 10 205 - 240
The power of the cooking zones can be
different in some small range from the data in
the table. It changes with the material and
dimensions of the cookware.
For optimal cooking results use cookware no
larger than the diameter in the table.
18 ENGLISH
10. ENERGY EFFICIENCY
10.1 Product information*
Model identification IKE84441XB
Type of hob Built-In Hob
Number of cooking zones 4
Heating technology Induction
Diameter of circular cooking zones (Ø) Left front
Left rear
Middle front
Right rear
21.0 cm
21.0 cm
14.5 cm
24.0 cm
Energy consumption per cooking zone (EC electric
cooking)
Left front
Left rear
Middle front
Right rear
179.6 Wh / kg
177.0 Wh / kg
180.2 Wh / kg
174.6 Wh / kg
Energy consumption of the hob (EC electric hob) 177.8 Wh / kg
* For European Union according to EU 66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine
according to 742/2019.
EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
The energy measurements referring to the cooking area are identified by the markings of the respective cooking
zones.
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
When you heat up water, use only the
amount you need.
If it is possible, always put the lids on the
cookware.
Before you activate the cooking zone put
the cookware on it.
Put the smaller cookware on the smaller
cooking zones.
Put the cookware directly in the centre of
the cooking zone.
Use the residual heat to keep the food
warm or to melt it.
11. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put
the packaging in relevant containers to
recycle it. Help protect the environment and
human health by recycling waste of electrical
and electronic appliances. Do not dispose of
appliances marked with the symbol with
the household waste. Return the product to
your local recycling facility or contact your
municipal office.
ENGLISH 19
FÜR PERFEKTE ERGEBNISSE
Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es
geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den
innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit
Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Bitte
nehmen Sie sich ein paar Minuten Zeit, um das Beste aus ihm herauszuholen.
Besuchen Sie uns auf unserer Website, um:
Anwendungshinweise, Prospekte, Informationen zu Fehlerbehebung, Service und
Reparatur zu erhalten:
www.aeg.com/support
Registrieren Sie Ihr Produkt, um einen erstklassigen Service zu erhalten:
www.registeraeg.com
Um Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu kaufen:
www.aeg.com/shop
KUNDENDIENST UND SERVICE
Verwenden Sie immer Original-Ersatzteile.
Halten Sie folgende Angaben bereit, wenn Sie sich an einen autorisierten Kundendienst
wenden: Modell, PNC, Seriennummer.
Die Daten finden Sie auf dem Typenschild.
Warnungs-/Sicherheitshinweise
Allgemeine Informationen und Empfehlungen
Informationen zum Umweltschutz
Änderungen vorbehalten.
INHALTSVERZEICHNIS
1. SICHERHEITSHINWEISE............................................................................................ 20
2. SICHERHEITSANWEISUNGEN...................................................................................23
3. MONTAGE.................................................................................................................... 25
4. GERÄTEBESCHREIBUNG...........................................................................................26
5. TÄGLICHER GEBRAUCH............................................................................................ 28
6. TIPPS UND HINWEISE................................................................................................ 33
7. REINIGUNG UND PFLEGE..........................................................................................36
8. FEHLERSUCHE............................................................................................................36
9. TECHNISCHE DATEN..................................................................................................38
10. ENERGIEEFFIZIENZ..................................................................................................39
11. UMWELTTIPPS.......................................................................................................... 40
1. SICHERHEITSHINWEISE
Lesen Sie vor der Montage und dem Gebrauch des Geräts
zuerst die Bedienungsanleitung. Bei Verletzungen oder
20 DEUTSCH
Schäden infolge nicht ordnungsgemäßer Montage oder
Verwendung übernimmt der Hersteller keine Haftung.
Bewahren Sie die Anleitung zum Nachschlagen an einem
sicheren und zugänglichen Ort auf.
1.1 Sicherheit von Kindern und schutzbedürftigen
Personen
Das Gerät kann von Kindern ab 8 Jahren und Personen mit
eingeschränkten physischen, sensorischen oder geistigen
Fähigkeiten oder mit mangelnder Erfahrung/mangelndem
Wissen benutzt werden, wenn sie durch eine für ihre
Sicherheit zuständige Person beaufsichtigt werden oder
von dieser Person Anweisungen erhalten haben, wie das
Gerät sicher zu bedienen ist und welche Gefahren bei nicht
ordnungsgemäßer Bedienung bestehen. Kinder unter 8
Jahren und Personen mit schweren Behinderungen oder
Mehrfachbehinderung sollten vom Gerät ferngehalten
werden, wenn sie nicht ständig beaufsichtigt werden.
Kinder sollten beaufsichtigt werden, um sicherzustellen,
dass sie nicht mit dem Gerät.
Halten Sie sämtliches Verpackungsmaterial von Kindern
fern und entsorgen Sie es ordnungsgemäß.
WARNUNG: Halten Sie Kinder und Haustiere von dem
Gerät fern, wenn es in Betrieb oder in der Abkühlphase ist.
Die zugänglichen Geräteteile werden beim Betrieb sehr
heiß.
Falls Ihr Gerät mit einer Kindersicherung ausgestattet ist,
empfehlen wir, diese einzuschalten.
Kinder dürfen keine Reinigung und Wartung des Geräts
ohne Beaufsichtigung durchführen.
1.2 Allgemeine Sicherheit
WARNUNG: Das Gerät und die zugänglichen Geräteteile
werden während des Betriebs heiß. Seien Sie vorsichtig
und berühren Sie niemals die Heizelemente.
DEUTSCH 21
WARNUNG: Kochen mit Fett oder Öl auf einem
unbeaufsichtigten Kochfeld ist gefährlich und kann ggf. zu
einem Brand führen.
Versuchen Sie NIEMALS, ein Feuer mit Wasser zu löschen,
sondern schalten Sie das Gerät aus und decken Sie die
Flamme ab, z.B. mit einem Deckel oder einer
Feuerlöschdecke.
WARNUNG: Das Gerät darf nicht durch ein externes
Schaltgerät, wie einer Zeitschaltuhr, mit Strom versorgt
oder an einen Schaltkreis angeschlossen werden, der vom
einem Programm regelmäßig ein- und ausgeschaltet wird.
ACHTUNG: Der Kochvorgang muss überwacht werden. Ein
kurzer Kochvorgang muss kontinuierlich überwacht werden.
WARNUNG: Brandgefahr: Lagern Sie keine Gegenstände
auf den Kochflächen.
Metallische Gegenstände wie Messer, Gabeln, Löffel und
Deckel sollten nicht auf die Oberfläche des Kochfelds
gelegt werden, da diese heiß werden können.
Verwenden Sie das Gerät nicht, bevor es in den
Einbauschrank gesetzt wird.
Reinigen Sie das Gerät nicht mit einem
Dampfstrahlreiniger.
Schalten Sie das Kochfeld nach dem Gebrauch aus und
verlassen Sie sich nicht auf die Topferkennung.
Hat die Glaskeramik-/Glasoberfläche einen Sprung,
schalten Sie das Gerät aus und nehmen Sie es vom
Stromnetz. Falls das Gerät direkt mit dem Stromnetz
verbunden ist und nicht getrennt werden kann, nehmen Sie
die Sicherung für den Anschluss heraus, um die
Stromversorgung zu unterbrechen. Verständigen Sie in
jedem Fall den autorisierten Kundendienst.
Wenn das Netzkabel beschädigt ist, muss es vom
Hersteller, einem autorisierten Kundendienst oder einer
ähnlich qualifizierten Person zur Vermeidung einer
Gefahrenquelle ersetzt werden.
22 DEUTSCH
WARNUNG: Verwenden Sie nur Schutzabdeckungen des
Herstellers des Kochgeräts, von ihm in der
Bedienungsanleitung als geeignete und empfohlene
Schutzabdeckungen oder die im Gerät enthaltene
Schutzabdeckung. Es besteht Unfallgefahr durch die
Verwendung ungeeigneter Schutzabdeckungen.
2. SICHERHEITSANWEISUNGEN
2.1 Montage
WARNUNG!
Nur eine qualifizierte Fachkraft
darf die Montage des Geräts
vornehmen.
WARNUNG!
Verletzungsgefahr sowie Risiko
von Schäden am Gerät.
Entfernen Sie das gesamte
Verpackungsmaterial.
Montieren Sie ein beschädigtes Gerät
nicht und benutzen Sie es nicht.
Halten Sie sich an die mitgelieferte
Montageanleitung.
Die Mindestabstände zu anderen Geräten
und Küchenmöbeln sind einzuhalten.
Seien Sie beim Umsetzen des Gerätes
vorsichtig, da es sehr schwer ist. Tragen
Sie stets Sicherheitshandschuhe und
festes Schuhwerk.
Dichten Sie die Ausschnittskanten mit
einem Dichtungsmittel ab, um ein
Aufquellen durch Feuchtigkeit zu
verhindern.
Schützen Sie die Geräteunterseite vor
Dampf und Feuchtigkeit.
Installieren Sie das Gerät nicht direkt
neben einer Tür oder unter einem
Fenster. So kann heißes Kochgeschirr
nicht herunterfallen, wenn die Tür oder
das Fenster geöffnet wird.
Jedes Gerät besitzt Kühlgebläse auf
seiner Unterseite.
Ist das Gerät über einer Schublade
installiert:
Lagern Sie keine kleinen Papierstücke
oder -blätter, die eingezogen werden
können, in der Schublade, da sie die
Kühlgebläse beschädigen oder das
Kühlsystem beeinträchtigen können.
Halten Sie einen Abstand von
mindestens 2 cm zwischen dem
Geräteboden und den Teilen, die in
der Schublade gelagert sind, ein.
Entfernen Sie Trennplatten, die im
Küchenmöbel unter dem Gerät installiert
sind.
2.2 Elektrischer Anschluss
WARNUNG!
Brand- und Stromschlaggefahr.
Alle elektrischen Anschlüsse sollten von
einem qualifizierten Elektriker
vorgenommen werden.
Das Gerät muss geerdet sein.
Vor der Durchführung jeglicher Arbeiten
muss das Gerät von der elektrischen
Stromversorgung getrennt werden.
Stellen Sie sicher, dass die Daten auf
dem Typenschild mit den elektrischen
Nennwerten der Netzspannung
übereinstimmen.
Vergewissern Sie sich, dass das Gerät
ordnungsgemäß installiert ist. Lockere
und unsachgemäße Kabel oder Stecker
(falls vorhanden) können die Klemme
überhitzen.
Verwenden Sie das richtige
Stromnetzkabel.
Achten Sie darauf, dass sich das
Stromnetzkabel nicht verheddert.
Stellen Sie sicher, dass ein
Überspannungsschutz installiert ist.
Verwenden Sie die Klemme für die
Zugentlastung am Kabel.
Stellen Sie beim Anschluss des
Gerätesteckers an eine Steckdose sicher,
DEUTSCH 23
dass das Netzkabel oder ggf. der
Netzstecker nicht mit dem heißen Gerät
oder heißem Kochgeschirr in Berührung
kommt.
Verwenden Sie keine
Mehrfachsteckdosen oder
Verlängerungskabel.
Achten Sie darauf, den Netzstecker (falls
zutreffend) oder das Netzkabel nicht zu
beschädigen. Wenden Sie sich zum
Austausch eines beschädigten
Netzkabels an unseren autorisierten
Kundendienst oder eine Elektrofachkraft.
Alle Teile, die gegen direktes Berühren
schützen, sowie die isolierten Teile
müssen so befestigt werden, dass sie
nicht ohne Werkzeug entfernt werden
können.
Stecken Sie den Netzstecker erst nach
Abschluss der Montage in die Steckdose.
Stellen Sie sicher, dass der Netzstecker
nach der Montage noch zugänglich ist.
Falls die Steckdose lose ist, schließen Sie
den Netzstecker nicht an.
Ziehen Sie nicht am Netzkabel, wenn Sie
das Gerät von der Stromversorgung
trennen möchten. Ziehen Sie stets am
Netzstecker.
Verwenden Sie nur geeignete
Trenneinrichtungen: Überlastschalter,
Sicherungen (Schraubsicherungen
müssen aus dem Halter entfernt werden
können), Fehlerstromschutzschalter und
Schütze.
Die elektrische Installation muss eine
Trenneinrichtung aufweisen, mit der Sie
das Gerät allpolig von der
Stromversorgung trennen können. Die
Trenneinrichtung muss mit einer
Kontaktöffnungsbreite von mindestens
3 mm ausgeführt sein.
2.3 Gebrauch
WARNUNG!
Verletzungs-, Verbrennungs-
und Stromschlaggefahr.
Entfernen Sie vor dem ersten Gebrauch
alle Verpackungen, Kennzeichnungen
und Schutzfolien (falls zutreffend).
Dieses Gerät ist ausschließlich zur
Verwendung im Haushalt (in
Innenräumen) bestimmt.
Nehmen Sie keine technischen
Änderungen am Gerät vor.
Vergewissern Sie sich, dass die
Lüftungsöffnungen nicht blockiert sind.
Lassen Sie das Gerät während des
Betriebs nicht unbeaufsichtigt.
Schalten Sie die Kochzone nach jedem
Gebrauch „aus“.
Legen Sie kein Besteck bzw. keine
Deckel auf die Kochzonen. Anderenfalls
werden sie sehr heiß.
Benutzen Sie das Gerät nicht mit nassen
Händen oder wenn es mit Wasser Kontakt
hat.
Verwenden Sie das Gerät nicht als
Arbeits- oder Abstellfläche.
Ist die Oberfläche des Geräts
gesprungen, trennen Sie das Gerät sofort
von der Stromversorgung. So vermeiden
Sie einen elektrischen Schlag.
Benutzer mit einem Herzschrittmacher
müssen einen Mindestabstand von 30 cm
zu den Induktionskochzonen einhalten,
wenn das Gerät in Betrieb ist.
Wenn Sie Speisen in heißes Öl legen,
kann es spritzen.
WARNUNG!
Brand- und Explosionsgefahr
Öle und Fette können beim Erhitzen
brennbare Dämpfe freisetzen. Halten Sie
Flammen oder erhitzte Gegenstände
während des Kochens von Fetten und
Ölen fern.
Die Dämpfe, die sehr heißes Öl
freisetzen, können zu einer spontanen
Verbrennung führen.
Gebrauchtes Öl, das Speisereste
enthalten kann, kann schon bei einer
niedrigeren Temperatur einen Brand
verursachen als Öl, das zum ersten Mal
verwendet wird.
Platzieren Sie keine entflammbaren
Produkte oder Gegenstände, die mit
entflammbaren Produkten benetzt sind,
im Gerät, auf dem Gerät oder in der Nähe
des Geräts.
WARNUNG!
Risiko von Schäden am Gerät.
Stellen Sie kein heißes Kochgeschirr auf
das Bedienfeld.
24 DEUTSCH
Legen Sie keine heißen Topfdeckel auf
die Glasoberfläche des Kochfeldes.
Lassen Sie Kochgeschirr nicht
leerkochen.
Achten Sie darauf, dass keine
Gegenstände oder Kochgeschirr auf das
Gerät fallen. Die Oberfläche könnte
beschädigt werden.
Schalten Sie die Kochzonen nicht mit
leerem Kochgeschirr oder ohne
Kochgeschirr ein.
Legen Sie keine Alufolie direkt auf das
Gerät.
Kochgeschirr aus Gusseisen, Aluminium
oder mit einem beschädigten Boden kann
Kratzer dem Glas/der Glaskeramik
verursachen. Heben Sie diese
Gegenstände immer an, wenn Sie sie auf
der Kochfläche bewegen müssen.
Dieses Gerät ist nur zum Kochen
bestimmt. Es darf nicht für andere Zwecke
z. B. zum Erwärmen von Räumen
verwendet werden.
2.4 Reinigung und Pflege
Reinigen Sie das Gerät regelmäßig, um
eine Verschlechterung des
Oberflächenmaterials zu verhindern.
Schalten Sie das Gerät vor dem Reinigen
aus und lassen Sie es abkühlen
Reinigen Sie das Gerät nicht mit
Wasserspray oder Dampf.
Reinigen Sie das Geräts mit einem
weichen, feuchten Tuch. Verwenden Sie
ausschließlich Neutralreiniger. Benutzen
Sie keine Scheuermittel, scheuernde
Reinigungsschwämmchen, Lösungsmittel
oder Metallgegenstände.
2.5 Wartung
Wenden Sie sich zur Reparatur des
Geräts an den autorisierten
Kundendienst. Dabei dürfen
ausschließlich Originalersatzteile
verwendet werden.
Bezüglich der Lampe(n) in diesem Gerät
und separat verkaufter Ersatzlampen:
Diese Lampen müssen extremen
physikalischen Bedingungen in
Haushaltsgeräten standhalten, wie z.B.
Temperatur, Vibration, Feuchtigkeit, oder
sollen Informationen über den
Betriebszustand des Gerätes anzeigen.
Sie sind nicht für den Einsatz in anderen
Geräten vorgesehen und nicht für die
Raumbeleuchtung geeignet.
2.6 Entsorgung
WARNUNG!
Verletzungs- und
Erstickungsgefahr.
Informationen zur Entsorgung des Geräts
erhalten Sie von Ihrer
Gemeindeverwaltung.
Trennen Sie das Gerät von der
Stromversorgung.
Schneiden Sie das Netzkabel in der Nähe
des Geräts ab, und entsorgen Sie es.
3. MONTAGE
WARNUNG!
Siehe Kapitel
Sicherheitshinweise.
3.1 Vor der Montage
Notieren Sie vor der Montage des Kochfelds
folgende Daten, die Sie auf dem Typenschild
finden. Das Typenschild ist auf dem Boden
des Kochfelds angebracht.
Seriennummer ............
3.2 Einbau-Kochfelder
Einbau-Kochfelder dürfen nur nach dem
Einbau in normgerechte, passende
Einbaumöbel und Arbeitsplatten betrieben
werden.
3.3 Anschlusskabel
Das Kochfeld wird mit einem
Anschlusskabel.
Ersetzen Sie ein defektes Netzkabel
durch den Kabeltyp: H05V2V2-F die einer
Temperatur von 90 °C oder höher
standhält. Wenden Sie sich an einen
DEUTSCH 25
autorisierten Kundendienst. Das
Anschlusskabel darf nur von einem
qualifizierten Elektriker ersetzt werden.
3.4 Aufbau
Wenn Sie das Kochfeld unter einer
Dunstabzugshaube installieren, beachten Sie
bitte die Montageanleitung der
Dunstabzugshaube für den Mindestabstand
zwischen den Geräten.
min.
50mm
min.
500mm
Ist das Gerät über einer Schublade installiert,
kann die Kochfeldbelüftung die in der
Schublade aufbewahrten Gegenstände
während des Garvorgangs aufwärmen.
46
25
min. 55
766
550
516
490+1 750+1
max R5
min. 1500
33575
min.
12
min.
60
min.
28
Sie finden das Video-Tutorial „So installieren
Sie Ihr AEG Induktionskochfeld -
Arbeitsflächeninstallation“, indem Sie den
vollständigen Namen eingeben, der in der
folgenden Grafik angegeben ist.
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your AEG
Induction Hob - Worktop installation
4. GERÄTEBESCHREIBUNG
4.1 Anordnung der Kochflächen
1 1 1
2
1
1Induktionskochzone
2Bedienfeld
26 DEUTSCH
4.2 Bedienfeldanordnung
7 852 43
9
1
12 1011
6
Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen
Signale informieren Sie über die aktiven Funktionen.
Sen‐
sorfeld
Funktion Kommentar
1EIN / AUS Ein- und Ausschalten des Kochfeldes.
2Verriegelung / Kindersicherung Verriegeln / Entriegeln des Bedienfelds.
3Pause Ein- und Ausschalten der Funktion.
4Bridge Ein- und Ausschalten der Funktion.
5- Kochstufenanzeige Zeigt die Kochstufe an.
6- Kochzonen-Anzeigen des Timers Zeigt an, für welche Kochzone die Zeit eingestellt wur
de.
7- Timer-Anzeige Zeigt die Zeit in Minuten an.
8Hob²Hood Ein- und Ausschalten des manuellen Modus der Funkti‐
on.
9- Auswählen der Kochzone.
10 / - Erhöhen oder Verringern der Zeit.
11 PowerBoost Einschalten der Funktion.
12 - Einstellskala Einstellen der Kochstufe.
4.3 Anzeige der Kochstufen
Display Beschreibung
Die Kochzone ist ausgeschaltet.
- Die Kochzone ist eingeschaltet.
DEUTSCH 27
Display Beschreibung
Pause ist eingeschaltet.
Automatisches Aufheizen ist eingeschaltet.
PowerBoost ist eingeschaltet.
+ Zahl Eine Störung ist aufgetreten.
/ / OptiHeat Control (3-stufige Restwärmeanzeige): Weitergaren/Warmhalten/Restwärme.
Verriegelung/ Kindersicherung ist eingeschaltet.
Das Kochgeschirr ist ungeeignet oder zu klein bzw. es befindet sich kein Kochgeschirr
auf der Kochzone.
Automatische Abschaltung ist eingeschaltet.
4.4 OptiHeat Control (3-stufige
Restwärmeanzeige)
WARNUNG!
/ / Solange die Anzeige
leuchtet, besteht
Verbrennungsgefahr durch
Restwärme.
Die Induktionskochzonen erzeugen die
erforderliche Hitze zum Kochen direkt im
Boden des Kochgeschirrs. Die Glaskeramik
wird durch die Hitze des Kochgeschirrs
erhitzt.
Die Anzeigen / / erscheinen, wenn
eine Kochzone heiß ist. Sie zeigen den
Restwärmegrad der Kochzonen an, die Sie
gerade verwenden.
Die Anzeige kann ebenso erscheinen:
für die benachbarten Kochzonen, auch
wenn Sie sie nicht benutzen,
wenn heißes Kochgeschirr auf die kalte
Kochzone gestellt wird,
wenn das Kochfeld ausgeschaltet ist, aber
die Kochzone noch heiß ist.
Die Anzeige erlischt, wenn die Kochzone
abgekühlt ist.
5. TÄGLICHER GEBRAUCH
WARNUNG!
Siehe Kapitel
Sicherheitshinweise.
5.1 Ein- und Ausschalten
Berühren Sie 1 Sekunde lang, um das
Kochfeld ein- oder auszuschalten.
5.2 Automatische Abschaltung
Mit dieser Funktion wird das Kochfeld in
folgenden Fällen automatisch
ausgeschaltet:
Alle Kochzonen sind ausgeschaltet,
Nach dem Einschalten des Kochfelds wird
keine Kochstufe gewählt,
Das Bedienfeld ist mehr als 10 Sekunden
mit verschütteten Lebensmitteln oder
einem Gegenstand bedeckt (Topf, Tuch
usw.). Ein akustisches Signal ertönt und
28 DEUTSCH
mit der höchsten Stufe ein und wechselt
dann zur gewünschten Einstellung.
Zum Einschalten der Funktion
muss die Kochzone abgekühlt
sein.
Einschalten der Funktion für eine
Kochzone: Berühren Sie ( leuchtet
auf). Berühren Sie dann gleich danach die
gewünschte Kochstufe. Nach 3 Sekunden
leuchtet auf.
Ausschalten der Funktion: Ändern Sie die
Kochstufe.
5.7 PowerBoost
Diese Funktion stellt den
Induktionskochzonen zusätzliche Leistung
zur Verfügung. Für die Induktionskochzone
kann diese Funktion nur für einen begrenzten
Zeitraum eingeschaltet werden. Danach
schaltet die Induktionskochzone automatisch
wieder auf die höchste Kochstufe um.
Siehe Kapitel „Technische
Daten“.
Einschalten der Funktion für eine
Kochzone: Berühren Sie . leuchtet
auf.
Ausschalten der Funktion: Ändern Sie die
Kochstufe.
5.8 Kurzzeitwecker
Countdown-Timer
Sie können diese Funktion verwenden, um
die Dauer eines einzelnen Kochvorgangs
einzustellen.
Stellen Sie zuerst die Kochstufe für die
Kochzone und erst danach die Funktion ein.
Auswählen der Kochzone: Berühren Sie
wiederholt, bis die Anzeige der gewünschten
Kochzone erscheint.
Einschalten der Funktion: Berühren Sie
des Timers, um die Zeit einzustellen (00 - 99
Minuten). Wenn die Kontrolllampe der
Kochzone anfängt zu blinken, wird die Zeit
heruntergezählt.
So wird die Restzeit angezeigt: Berühren
Sie , um die Kochzone auszuwählen. Die
Kontrolllampe der Kochzone beginnt zu
blinken. Das Display zeigt die Restzeit an.
Ändern der Zeit: Berühren Sie , um die
Kochzone auszuwählen. Berühren Sie
oder .
Ausschalten der Funktion: Berühren Sie
, um die Kochzone auszuwählen und
berühren Sie dann . Die verbleibende Zeit
zählt rückwärts bis . Die Kontrolllampe der00
Kochzone erlischt.
Nach Ablauf der Zeit ertönt ein
akustisches Signal und blinkt.00
Die Kochzone wird
ausgeschaltet.
Ausschalten des Signaltons: Berühren Sie
.
CountUp Timer
Mit dieser Funktion können Sie feststellen,
wie lange eine Kochzone bereits in Betrieb
ist.
Auswählen der Kochzone: Berühren Sie
wiederholt, bis die Anzeige der gewünschten
Kochzone erscheint.
Einschalten der Funktion: Berühren Sie
des Timers. erscheint. Wenn die
Kontrolllampe der Kochzone anfängt zu
blinken, wird die Zeit hochgezählt. Das
Display schaltet um zwischen und der
abgelaufenen Zeit (in Minuten).
So können Sie feststellen, wie lange die
Kochzone bereits in Betrieb ist: Berühren
Sie , um die Kochzone auszuwählen. Die
Kontrolllampe der Kochzone beginnt zu
blinken. Im Display wird die Einschaltdauer
der Zone angezeigt.
Ausschalten der Funktion: Berühren Sie
und dann oder . Die Kontrolllampe
der Kochzone erlischt.
Kurzzeit-Wecker
Sie können diese Funktion verwenden, wenn
das Kochfeld eingeschaltet, die Kochzonen
30 DEUTSCH
aber nicht in Betrieb sind. Das Display zeigt
an.
Einschalten der Funktion: Berühren Sie
und dann oder des Timers, um die Zeit
einzustellen. Nach Ablauf der Zeit blinkt
ertönt ein akustisches Signal und blinkt.00
Ausschalten des Signaltons: Berühren Sie
.
Diese Funktion hat keine
Auswirkung auf den
Kochzonenbetrieb.
5.9 Pause
Mit dieser Funktion werden alle
eingeschalteten Kochzonen auf die
niedrigste Kochstufe geschaltet.
Wenn diese Funktion eingeschaltet ist,
werden alle anderen Symbole des
Bedienfelds verriegelt.
Die Funktion unterbricht nicht die Timer-
Funktionen.
Drücken Sie um die Funktion zu
aktivieren.
leuchtet. Die Kochstufe wird auf 1
reduziert.
Zum Ausschalten der Funktion: Drücken
Sie . Die vorherige Heizstufe wird aktiviert.
5.10 Verriegelung
Sie können das Bedienfeld sperren, wenn
Kochzonen eingeschaltet sind. So wird
verhindert, dass die Kochstufe versehentlich
geändert wird.
Stellen Sie zuerst die Kochstufe ein.
Einschalten der Funktion:Berühren Sie .
leuchtet 4 Sekunden auf. Der Timer bleibt
eingeschaltet.
Ausschalten der Funktion: Berühren Sie
. Die vorherige Kochstufe wird angezeigt.
Diese Funktion wird auch
ausgeschaltet, sobald das
Kochfeld ausgeschaltet wird.
5.11 Kindersicherung
Diese Funktion verhindert ein
versehentliches Einschalten des Kochfelds.
Einschalten der Funktion: Schalten Sie das
Kochfeld mit ein. Stellen Sie keine
Kochstufe ein. Berühren Sie 4 Sekunden
lang. leuchtet auf. Schalten Sie das
Kochfeld mit aus.
Ausschalten der Funktion: Schalten Sie
das Kochfeld mit ein. Stellen Sie keine
Kochstufe ein. Berühren Sie 4 Sekunden
lang. leuchtet auf. Schalten Sie das
Kochfeld mit aus.
Vorübergehendes Ausschalten der
Funktion für einen einzelnen
Kochvorgang: Schalten Sie das Kochfeld
mit ein. leuchtet auf. Berühren Sie
4 Sekunden lang. Stellen Sie die Kochstufe
innerhalb von 10 Sekunden ein. Das
Kochfeld kann jetzt bedient werden. Wenn
Sie das Kochfeld mit ausschalten, wird
diese Funktion wieder eingeschaltet.
5.12 OffSound Control (Ein- und
Ausschalten der Signaltöne)
Schalten Sie das Kochfeld aus. Berühren Sie
3 Sekunden lang. Das Display wird ein-
und ausgeschaltet. Berühren Sie 3
Sekunden lang. Es wird oder
angezeigt. Berühren Sie des Timers zum
Auswählen von:
- der Signalton ist ausgeschaltet
- der Signalton ist eingeschaltet
Ihre Einstellungen werden übernommen,
sobald das Kochfeld automatisch
ausgeschaltet wird.
Haben Sie die Funktion auf eingestellt,
ertönt der Signalton nur in folgenden Fällen:
Bei der Berührung von
Nach Ablauf der für Kurzzeit-Wecker
eingestellten Zeit
Nach Ablauf der für Countdown-Timer
eingestellten Zeit
DEUTSCH 31
Wenn das Bedienfeld bedeckt ist.
5.13 Power-Management
Sind mehrere Zonen eingeschaltet und die
verbrauchte Leistung überschreitet die
Begrenzung der Stromversorgung, teilt diese
Funktion die verfügbare Leistung zwischen
allen Kochzonen auf. Das Kochfeld steuert
die Kochstufen, um die Sicherungen der
Hausinstallation zu schützen.
Die Kochzonen werden nach Position und
Anzahl der Phasen im Kochfeld gruppiert.
Jede Phase darf mit einer maximalen
Leistung von (3700 W) belastet werden.
Erreicht das Kochfeld die maximale
verfügbare Leistung innerhalb einer
Phase, wird die Leistung der Kochzonen
automatisch reduziert.
Die Kochstufe der zuletzt gewählten
Kochzone wird immer priorisiert. Die
verbleibende Leistung wird zwischen den
zuvor eingeschalteten Kochzonen in
umgekehrter Reihenfolge aufgeteilt.
Die Kochstufenanzeige der reduzierten
Zonen wechselt zwischen der anfangs
gewählten Kochstufe und der reduzierten
Kochstufe.
Warten Sie, bis das Display aufhört zu
blinken, oder verringern Sie die Kochstufe
der zuletzt ausgewählten Kochzone. Die
Kochzonen arbeiten mit der reduzierten
Kochstufe weiter. Ändern Sie bei Bedarf
die Kochstufen der Kochzonen manuell.
Siehe Abbildung für mögliche
Kombinationen, wie die Leistung unter den
Kochzonen verteilt werden kann.
5.14 Hob²Hood
Diese innovative automatische Funktion
verbindet das Kochfeld mit einer speziellen
Dunstabzugshaube. Das Kochfeld und die
Dunstabzugshaube kommunizieren mit Hilfe
von Infrarotsignalen. Die Geschwindigkeit
des Lüfters wird automatisch eingestellt. Sie
richtet sich nach dem eingestellten Modus
und der Temperatur des heißesten
Kochgeschirrs auf dem Kochfeld. Sie können
den Lüfter auch manuell auf dem Bedienfeld
des Kochfelds einstellen.
Bei den meisten
Dunstabzugshauben ist das
Fernsteuerungssystem
werkseitig ausgeschaltet.
Schalten Sie es ein, bevor Sie
die Funktion nutzen. Weitere
Informationen finden Sie in der
Anleitung der
Dunstabzugshaube.
Automatikbetrieb der Funktion
Stellen Sie für den automatischen Betrieb
den Modus auf H1 – H6. Das Kochfeld ist
standardmäßig auf H5 gestellt.Die
Dunstabzugshaube schaltet sich ein, wenn
Sie das Kochfeld bedienen. Das Kochfeld
misst die Temperatur des Kochgeschirrs
automatisch und passt die Geschwindigkeit
des Lüfters an.
Automatikmodi
Automa‐
tische
Einschal‐
tung der
Beleuch‐
tung
Kochen1) Braten2)
Modus H0 Aus Aus Aus
Modus H1 Ein Aus Aus
Modus
H2 3)
Ein Lüfterge‐
schwindig
keit 1
Lüfterge‐
schwindig
keit 1
Modus H3 Ein Aus Lüfterge‐
schwindig
keit 1
32 DEUTSCH
6.1 Kochgeschirr
Bei Induktionskochzonen
erzeugt ein starkes
Elektromagnetfeld die Hitze im
Kochgeschirr sehr schnell.
Benutzen Sie für die Induktionskochzonen
geeignetes Kochgeschirr.
Der Boden des Kochgeschirrs muss so
dick und flach wie möglich sein.
Stellen Sie sicher, dass die Topfböden
sauber sind, bevor Sie sie auf das
Kochfeld stellen.
Um Kratzer zu vermeiden, darf der Topf
nicht auf dem Keramikglas verschoben
werden.
Kochgeschirrmaterial
Gusseisen, Stahl, Stahlemail,geeignet:
Edelstahl, Boden aus mehreren Schichten
verschiedener Materialien (vom Hersteller
als geeignet gekennzeichnet).
Aluminium, Kupfer,nicht geeignet:
Messing, Glas, Keramik, Porzellan.
Kochgeschirr eignet sich für
Induktionskochfelder, wenn:
Wasser sehr schnell auf einer Kochzone
kocht, die auf die höchste Erhitzungsstufe
geschaltet ist.
Ein Magnet auf den Boden des
Kochgeschirrs zieht.
Abmessungen des Kochgeschirrs
Induktionskochzonen passen sich
automatisch an die Größe des
Kochgeschirrbodens an.
Die Kochzoneneffizienz hängt vom
Durchmesser des Kochgeschirrs ab.
Kochgeschirr mit einem Durchmesser
kleiner als das Minimum erhält nur einen
Teil der von der Kochzone erzeugten
Leistung.
Verwenden Sie aus Sicherheitsgründen
und für optimale Kochergebnisse nicht
mehr Kochgeschirr als in der
„Spezifikation der
Kochzonen“ angegeben. Vermeiden Sie
es, Kochgeschirr während des
Kochvorgangs in die Nähe des
Bedienfelds zu stellen. Dies könnte sich
auf die Funktionsweise des Bedienfelds
auswirken oder die Kochfeldfunktionen
versehentlich aktivieren.
Siehe hierzu „Technische
Daten“.
6.2 Betriebsgeräusche
Es gibt verschiedene Betriebsgeräusche:
Knacken: Das Kochgeschirr besteht aus
unterschiedlichen Materialien
(Sandwichkonstruktion).
Pfeifen: Sie haben die Kochzone auf eine
hohe Stufe geschaltet und das
Kochgeschirr besteht aus
unterschiedlichen Materialien
(Sandwichkonstruktion).
Summen: Sie haben die Kochzone auf
eine hohe Stufe geschaltet.
Klicken: Elektrisches Umschalten .
Zischen, Surren: Der Ventilator läuft.
Die Geräusche sind normal und weisen
nicht auf eine Störung hin.
6.3 Öko Timer (Öko-Timer)
Um Energie zu sparen, schaltet sich die
Kochzonenheizung vor dem Signal des
Kurzzeitmessers ab. Die Abschaltzeit hängt
von der eingestellten Kochstufe und der
Gardauer ab.
6.4 Beispiele für
Kochanwendungen
Das Verhältnis zwischen der Kochstufe und
dem Energieverbrauch der Kochzone ist
nicht linear. Bei einer höheren Kochstufe
steigt der Energieverbrauch nicht
proportional an. Das bedeutet, dass eine
Kochzone, die auf eine mittlere Kochstufe
eingestellt ist, weniger als die Hälfte ihrer
maximalen Leistung verbraucht.
Die Angaben in der Tabelle sind
Richtwerte.
34 DEUTSCH
Kochstufe Verwendung für: Dauer
(Min.)
Tipps
- 1 Warmhalten von gekochten Speisen. nach Be‐
darf
Legen Sie einen Deckel auf das Koch‐
geschirr.
1 - 3 Sauce Hollandaise, Schmelzen: Butter,
Schokolade, Gelatine.
5 - 25 Von Zeit zu Zeit rühren.
1 - 3 Stocken: Lockere Omeletts, gebacke‐
ne Eier.
10 - 40 Mit einem Deckel garen.
3 - 5 Köcheln von Reis und Milchgerichten,
Erhitzen von Fertiggerichten.
25 - 50 Mindestens doppelte Menge Flüssig‐
keit zum Reis geben, Milchgerichte
nach der Hälfte der Zeit umrühren.
5 - 7 Dünsten von Gemüse, Fisch, Fleisch. 20 - 45 Einige Esslöffel Flüssigkeit zugeben.
7 - 9 Kartoffeln dünsten. 20 - 60 Max. ¼ l Wasser für 750 g Kartoffeln
verwenden.
7 - 9 Kochen Sie größere Mengen an Le‐
bensmitteln, Eintopfgerichten und Sup‐
pen.
60 - 150 Bis zu 3 l Flüssigkeit plus Zutaten.
9 - 12 Sanftes Braten: Schnitzel, Cordon
bleu, Kotelett, Frikadellen, Bratwürste,
Leber, Mehlschwitze, Eier, Pfannku‐
chen, Krapfen.
nach Be
darf
Nach der Hälfte der Zeit wenden.
12 - 13 Scharfes Braten, Rösti, Lendenstücke,
Steaks.
5 - 15 Nach der Hälfte der Zeit wenden.
14 Wasser kochen, Nudeln kochen, Fleisch anbraten (Gulasch, Schmorbraten), Frittieren von
Pommes frites.
Kochen Sie große Mengen Wasser. PowerBoost ist eingeschaltet.
6.5 Tipps und Hinweise für
Hob²Hood
Bei der Bedienung des Kochfelds mit der
Funktion:
Schützen Sie die Dunstabzugshaube vor
direktem Sonnenlicht.
Stellen Sie kein Halogenlicht auf die auf
die Dunstabzugshaube.
Decken Sie das Bedienfeld des Kochfelds
nicht ab.
Unterbrechen Sie den Signalfluss
zwischen dem Kochfeld und der
Dunstabzugshaube nicht (z. B. mit der
Hand, einem Kochgeschirrgriff oder
großen Topf). Siehe Abbildung.
Die abgebildete Dunstabzugshaube ist
nur beispielhaft.
DEUTSCH 35
Stellen Sie Kochgeschirr auf die
Kochzone, bevor Sie sie einschalten.
Stellen Sie kleineres Kochgeschirr auf die
kleineren Kochzonen.
Stellen Sie das Kochgeschirr mittig auf die
Kochzone.
Nutzen Sie die Restwärme, um die
Speisen warm zu halten oder zu
schmelzen.
11. UMWELTTIPPS
Recyceln Sie Materialien mit dem Symbol
. Entsorgen Sie die Verpackung in den
entsprechenden Recyclingbehältern.
Recyceln Sie zum Umwelt- und
Gesundheitsschutz elektrische und
elektronische Geräte. Entsorgen Sie Geräte
mit diesem Symbol nicht mit dem
Hausmüll. Bringen Sie das Gerät zu Ihrer
örtlichen Sammelstelle oder wenden Sie sich
an Ihr Gemeindeamt.
40 DEUTSCH


Specyfikacje produktu

Marka: AEG
Kategoria: Płyta indukcyjna
Model: IKE84441XB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AEG IKE84441XB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Płyta indukcyjna AEG

Instrukcje Płyta indukcyjna

Najnowsze instrukcje dla Płyta indukcyjna