Instrukcja obsługi Adj Mega Flash DMX

Adj Maszyna efektów Mega Flash DMX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adj Mega Flash DMX (8 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

American DJ www.americandj.com - Mega Flash DMX™ Instruction Manual Page 2® -

Unpacking: Thank you for purchasing the Mega Flash DMX™ by

American DJ . Every Mega Flash DMX™ has been thoroughly tested ®

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your unit

for damage and be sure all accessories necessary to operate the unit

have arrived intact. In the event damage has been found or parts are

missing, please contact our customer support number for further

instructions. Please do not return this unit to your dealer without first

contacting customer support at the number listed below.

Introduction: To optimize the performance of this product, please

read these operating instructions carefully to familiarize yourself with

the basic operations of this unit. The Mega Flash DMX™ is a 800 watt

strobe, that has a flash rate range of 1 to 15 flashes per second. Up

to 16 units may be linked together and controlled by single controller.

The units’ intensity, and flash rate can be manually adjusted using the

dipswitches.

Customer Support: American DJ provides a toll free customer sup-®

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments

or suggestions. For service related issue please contact American

DJ . Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. ®

Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj..com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty.

Please recycle the shipping carton when ever possible.

Mega Flash DMX™ Introduction

User Instructions

2/05

American DJ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

Mega Flash DMX™ Warranty Registration

The Mega Flash DMX™ carries a one year (365 days) limited war-

ranty. Please fill out the enclosed warranty card to validate your pur-

chase. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included

in the shipping container. If the unit is under warranty, you must pro-

vide a copy of your proof of purchase invoice. You may obtain a R.A.

number by contacting customer support at (800) 322-6337.

Mega Flash DMX™ Cleaning Instructions

Due to fog residue, smoke, and dust cleaning the fixture should be

carried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing every 20 days.

2. Use normal glass cleaner with a soft cloth to wipe down the inside

reflector and lens every 30-60 days.

3. Always be sure to dry all parts completely before plugging the

unit back in.

4. Frequent cleaning the unit will extend lamp life and ensure the fix-

tures reliability.

Cleaning frequency depends on the environment in which the fixture

operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-

ommend cleaning on a monthly basis. Periodic cleaning will ensure

longevity, and crisp beam output.

Mega Flash DMX™ Features

• Bright 800 Watt Lamp ZB-800

• Adjustable Flash Rate, and Intenstiy Rate

• Flash Rate range of 1 to 15 Flashes per Second

• Thermostat Protection

• Large coverage area

• Easy lamp Replacement

• Built-In Adjustable Hanging Yoke

Mega Flash DMX™ Safety Warnings

Safety Issues: This unit may blow a fuse if the maximum allotted load

of 15 amps is reached. If the fuse needs replacement, always replace

the fuse with same exact type that was remove, unless otherwise

instructed by an authorized American DJ service technician. Use of a ®

different type fuse from that which is recommended may cause fire or

electric shock and will void the manufactures warranty.

• To reduce the risk of electrical shock or ﬁre, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break off the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and ﬁre in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 3 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

Mega Flash DMX™ DMX Set Up

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ ®

Mega Flash DMX.™ The American DJ Mega Flash DMX®™ is 120v only.

Because line voltage may vary from venue to venue, you should be

sure your unit voltages matches the wall outlet voltage before attempt-

ing to operate you ﬁxture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

different manufactures to be linked together and operate from a sin-

gle controller, as long as all ﬁxtures and the controller are DMX com-

pliant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Dipswitches in DMX mode: This unit uses dipswitches to assign a

DMX address. Each dipswitch represents a binary value.

Dipswitch 1 address equals 1

Dipswitch 2 address equals 2

Dipswitch 3 address equals 4

Dipswitch 4 address equals 8

Dipswitch 5 address equals 16

Dipswitch 6 address equals 32

Dipswitch 7 address equals 64

Dipswitch 8 address equals 128

Dipswitch 9 address equals 256

Dipswitch 10 - Some units omit dipswitch 10. When a unit does

include dipswitch #10, it is usually used for special functions such as

Mega Flash DMX™ DMX Set Up

sound activation.

Assigning DMX Address: Each dipswitch has a preset value. A spe-

cific DMX address is set by combining the dipswitches that sum your

desired value. For example: To achieve a DMX address of 7, combine

dipswitches 1, 2, and 3. Since dipswitch 1 has a value of 1, dipswitch

2 has a value of 2, and dipswitch 3 has a value of 4, the combination

of the three create a DMX value of 7. (See example below).

Set DMX address 1: Set DMX address 7:

Dip-switches # 1 = 1 Dip-switches # 1 = 1

2 = 2

3 = 4

= 7

Data Cable (DMX Cable) Requirements (For DMX

and Master/Slave Operation): The Mega Flash

DMX™ can be controlled via DMX-512 protocol.

The Mega Flash DMX™ is a two channel DMX

unit. The DMX address is set on the side panel of

the Mega Flash DMX™ Your unit and your DMX

controller require a standard 3-pin XLR connec-

tor for data input and data output (Figure 1). If you

are making your own cables, be sure to use standard two conductor

shielded cable (This cable may be purchased at almost all pro sound

and lighting stores). Your cables should be made with a male and

female XLR connector on either end of the cable. Also remember that

DMX cable must be daisy chained and can not be split.

Notice: Be sure to follow ﬁgures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 1

Specyfikacje produktu

Marka:	Adj
Kategoria:	Maszyna efektów
Model:	Mega Flash DMX
Kolor produktu:	Czarny
Typ produktu:	Dyskotekowe światło stroboskopowe
Nadaje się do użytku w pomieszczeniach:	Tak
Źródło zasilania:	Prąd przemienny
Typ kontroli:	Przyciski
Wysokość produktu:	216 mm
Szerokość produktu:	394 mm
Głębokość produktu:	102 mm
Waga produktu:	2200 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Ilość:	1
Ilość lamp:	1 lamp(y)
Lampy:	800 W
Kolor światła:	Biały
Tryby oświetleniowe:	Dźwięk aktywowany
Protokoły sterowania oświetleniem:	DMX
Ilość kanałów DMX:	2 kan.
Wejście DMX:	Tak
Wyjście DMX:	Tak
Liczba styków:	3
Napięcie:	120 V
Częstotliwość danych wejściowych:	60 Hz
Średnica piłki:	- "
Diody LED:	DMX, Power
Stopień ochrony IP:	IP20
Regulowana prędkość:	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Wbudowany mikrofon:	Tak
Regulator intensywności światła:	Tak
Zakres ściemniania:	0 - 100 %