Instrukcja obsługi Adastra BCS52S

Adastra głośnik BCS52S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra BCS52S (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
BCS-series
Bluetooth® Ceiling Speaker Set
Item ref: 953.164, 3.165UK 95
User Manual
Version 1.3
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.164UK, 165UK User Manual 953.
Introduction
Thank you for choosing the Adastra BCS-seri Bluetooth ceiling speaker set for your ceiling es
speaker installation. This unit is designed to provide a discreet and expandable solution for
background music or other sound application Please read this manual to gain the best .
results from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids enter the housing, disconnect the mains immediately, allow unit to dry out and have checked
by qualified personnel before use. Avoid impact, extreme pressure or heavy vibration.
No user serviceable parts inside.
Do not open the case except for removing the front grille for installation.
Refer all servicing to qualified service personnel.
Safety
• The power supply provided in the package is adequate to power the active speaker with its
satellite connected. If further sets are to be used, each set must be powered from its own power
supply. If connecting directly to a ring main, this must be done by a qualified electrical installer.
Placement
• The active and passive unit contained in this set are suitable for mounting into a false ceiling or
partition wall, provided that there is adequate depth to accommodate the rear housing and that
the material is strong enough to safely support the weight of each unit.
Cleaning
• Use a soft cloth with a neutral detergent to clean the panel as required.
• Do not use solvents for cleaning the unit.
953.164UK, 165UK User Manual 953.
Installation
The BCS-system is supplied as a set of two speakers one active and one passive. –
Decide where the active speaker is to be situated and bear in mind that it may be the target
for a Bluetooth sending device and will need to be connected to the mains using the power
supply included.
Carefully mark out and cut a hole (check cut-out diameter in spec.) for each speaker,
ensuring that there is enough headroom to accommodate the rear housing of each speaker.
The BCS-series set is supplied with a fig.8 speaker cable. Feed the bare wire ends of this
cable through the hole for the active speaker and feed the crimped end through the hole for
the passive speaker.
Connect the crimp connectors onto the + and tabs of the passive speaker (there is one –
large and one small to avoid incorrect connection) and make a note of the colour coding on
the speaker cable for + and terminals, which will need to be matched on the active unit. –
Install the passive speaker as follows:
1. With the grille removed, position the passive speaker into its hole in the ceiling or
wall, ensuring that the wire is not trapped and clear of the dog-ear clamps. is
2. Use a cross head screwdriver to turn the 4 dog-ear clamps outward in turn, then
continue turning the screwdriver to draw the dog-ear clamps toward the ceiling or
wall supporting surface, taking care not to over-tighten the clamps.
3. Once secured, replace the magnetic grille by simply lifting it up to the speaker.
For the active speaker, all connections must be in place before positioning the speaker into
the ceiling or wall.

Specyfikacje produktu

Marka: Adastra
Kategoria: głośnik
Model: BCS52S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra BCS52S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Adastra

Adastra

Adastra WA-215 Instrukcja

17 Września 2024
Adastra

Adastra F40V Instrukcja

16 Września 2024
Adastra

Adastra SC32V Instrukcja

16 Września 2024
Adastra

Adastra 952.613UK Instrukcja

16 Września 2024
Adastra

Adastra 952.615UK Instrukcja

15 Września 2024
Adastra

Adastra 952.612UK Instrukcja

14 Września 2024
Adastra

Adastra FSV-B Instrukcja

13 Września 2024
Adastra

Adastra AH25 Instrukcja

13 Września 2024
Adastra

Adastra 952.618UK Instrukcja

13 Września 2024
Adastra

Adastra 952.614UK Instrukcja

13 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024