Instrukcja obsługi Adastra A22


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra A22 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
A22
Class- Compact Music Amplifier D
Item ref: 953.422UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.422 User ManualUK
Introducti on
Thank you for choosing the A22 to power your sound system This compact digital amplifier .
has been designed to provide a flexible background music and public address solution in a
discreet and easy- -use format. Please read and keep this user manual to achieve the best to
results from your equipment and avoid damage through misuse.
Front panel
1
Power on/off switch
5
Music TREBLE EQ control
2
Media player
6
Music BASS EQ control
3
Microphone input 6.3mm mono jack
7
AUX 1 input 3.5mm stereo jack
4
MIC VOLUME control
8
Music VOLUME control
Rear Pan el
9
LINE OUT output L+R RCA
13
10
AUX 2 put L+R RCA in
14
11
AUX 3 input L+R RCA
15
12
FM antenna connection F-type
953.422 User ManualUK
Placement
The A22 amplifier is supplied with 4 mounting
brackets, which can be fixed to the sides of the
housing with the tab facing upwards to enable
the A22 to be mounted under a counter-top
The A22 can even be mount against a wall. ed
Alternatively, the A22 may be used free standing on any flat surface or 2 units can be
mounted side- -side in a rack with one mou ing bracket facing forwards at each sideby 19nt ,
occupying a 1U rack space (the self- hesive feet wi need to be removed to allow this) 4 ad ll
Speaker connections
The A22 has 2 speaker output - CH and CH2 - on single removable screw terminal block, s 1 a
which can b red as Left and Right stereo outputs (13, 14) e wi .
Connect the negative screw terminal to the negative “–” “–” speaker terminal(s)
Connect the positive + screw terminal to the positive + ” speaker terminal(s)
Use speakers with a combined impedance no lower than 4 for each output channel. Ω
If each speaker being connected 4 , then connect only 1 speaker to each channel. is Ω
If each speaker is 8 , you can connect speaker 2 speakers in parallel per channel. Ω1 or
Do not connect more speakers to either channel as this may cause damage to the A22. ,
An example of wiring 8 speakers the A22 is Ωto
shown opposite .
A single 8 speaker may be connected to a Ω
channel or 2 may be connected in parallel to
present a combined 4 load to the output. Ω
The impedance of the load measured in ,
“Ohms” (Ω), will also determine the power .
The amplifier delivers its maximum power
output at the minimum impedance rating (4Ω).
If the impedance is higher (e.g. 8 ), then the Ω
output from that channel will be lower.
The combined load on each output shares the
power from th amplifier channel at .
This means that if two 8 speakers are connected to a single output in parallel, they will each Ω
receive half of the full power. If the amplifier is delivering W to two 8 speakers connected 50 Ω
in parallel, they must each be able to handl 25W. e


Specyfikacje produktu

Marka: Adastra
Kategoria: odbiornik
Model: A22

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra A22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Adastra

Adastra

Adastra V-122 Instrukcja

2 Października 2024
Adastra

Adastra RS240 Instrukcja

20 Września 2024
Adastra

Adastra RS120 Instrukcja

15 Września 2024
Adastra

Adastra DM60 Instrukcja

12 Września 2024
Adastra

Adastra UA60 Instrukcja

11 Września 2024
Adastra

Adastra UM90 Instrukcja

11 Września 2024
Adastra

Adastra RMC120 Instrukcja

11 Września 2024
Adastra

Adastra IW60B Instrukcja

11 Września 2024
Adastra

Adastra RM60 Instrukcja

11 Września 2024
Adastra

Adastra A4 Instrukcja

11 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik