Instrukcja obsługi Acer Predator CG437KS

Acer monitor Predator CG437KS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer Predator CG437KS (3 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn o󰀨 the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
7. In order to prevent damage to the LCD panel, do not place the monitor face down on a surface.
Connecting your monitor to a computer
1. Turn o󰀨 your computer and unplug your computer's power
cord.
2. Connect the signal cable to the HDMI (optional) and /or
DP (optional) input socket of the monitor, and the HDMI
(optional) and /or DP (optional) output socket of the
graphics card on the computer.
3. USB Type-C Cable (Optional, USB Type-C input models
only) Connect one end of the USB Type-C cable (optional)
to your computer and connect the other end to your
electric devices.
4. Connect the USB Cable(Optional)
Connect the USB cable to port for fast charge.
Connect the USB cable to port.
5. Optional: Connect one end of the LED Module cable to
your monitor and connect the other end to the LED lamp
belt.
6. Insert the monitor power cable into the power port at the
back of the monitor.
7. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
USB
DP
USB Type C
HEADER
LED lamp belt
LED Module cable
Note:
Audio output is only for audio output model. Please check user manual for more instruction.
About the LED lamp belt connection:
When you want to connect the LED lamp belt, remove the silicone pad rst.
When you do not need to connect the LED lamp belt, be sure to install the silicone pad back.
5 4 3 2 1
External controls
1Power button Power button turns the monitor on/o󰀨. Blue indicates power on. In the power saving mode, the blue power
saving lamp and the breathing lamp can be setting according to the LED Control, anther OSD Locked mode
is a blue breathing lamp.
2Function key
/
a. Press to view Hot Key Menu, Press again to enter hotkey 1 function (default is Modes, user can
redene).
b. When the Main Menu is active, press this key to view the basic information for your monitor and
current input or reset the custom color settings to the factory defaults.
English
3Function key
/
a. Press to view Hot Key Menu. Press again to enter hotkey 2 function (default is Brightness, user can
redene).
b. When the Main Menu is active, press this button to select Modes menu.
4Function key
/
X
a. Press to view Hot Key Menu. Press again to enter Input select function.
b. When the Main Menu is active, this button will quit the OSD.
5Function key
/
a. Press to view Hot Key Menu. Press again to enter Main Menu page.
b. The single toggle button on the backside of the Display bezel operates like a joystick. To move the
cursor, simply toggle the button in four directions. Press the button to select desired option. Red
indicates operable. Gray indicates inoperable.
Note: Acer monitor is purposed for video and visual display of information obtained from
electronic devices.
Transmitting the 4K 144Hz signal via one HDMI 2.1/ DP 1.4 port requires DSC (Display Stream Compression) functionality.
AdaptiveSync:
It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power e󰀩cient, virtually stutter free and low-latency display update.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which
can be determined by turning the device o󰀨 and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit di󰀨erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive
2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC
regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certied to comply with the Class B limits may be attached
to this equipment. Operation with non-certied peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modications not expressly approved by the manufacturer could void the user authority, which is granted by
the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Notice: Canadian users
CAN ICES-003(B)/NMB-003(B)
Disposal of waste equipment by user in private household in the European Union
English
This symbol on the product or on its packaging indicates that this product must not be disposed of with your
other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing
it over to a designated collection point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment. For
more information about where you can drop o󰀨 your waste equipment for recycling, please contact your local
city o󰀩ce, your household waste disposal service or the shop where you purchased the product.


Specyfikacje produktu

Marka: Acer
Kategoria: monitor
Model: Predator CG437KS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acer Predator CG437KS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Acer

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Acer

Acer V193L Instrukcja

13 Stycznia 2025
Acer

Acer SB270 Instrukcja

12 Stycznia 2025
Acer

Acer AL2021 Instrukcja

30 Grudnia 2025
Acer

Acer VVA241Y Instrukcja

30 Grudnia 2025
Acer

Acer ED320QRP3 Instrukcja

7 Grudnia 2024
Acer

Acer K252HQL Instrukcja

5 Grudnia 2024
Acer

Acer ED270X Instrukcja

5 Grudnia 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-V Instrukcja

14 Stycznia 2025