Instrukcja obsługi Acer EB243YA

Acer monitor EB243YA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer EB243YA (5 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Package contents
LCD monitor Power cord HDMI cable
(optional)
VGA cable
(optional) Quick start guide
USER GUIDE
LCD monitor E YB3 series-EB243
Attaching the monitor to the stand
1. Remove the monitor bracket and base from the packaging and place it on a stable and level workspace.
2. Remove the monitor from the packaging, by aligning the front-end of the bracket with the corresponding
slot on the back of the display, push the bracket into the slot until you hear a click sound.
3. Push the stand against the bracket and turn the screw clockwise to fasten it. By doing so, the bracket shall
be installed on the monitor.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's
power cord.
2. Connect the signal cable to the VGA (optional) and/or
HDMI (optional) input socket of the monitor, and the
VGA (optional) and/or HDMI (optional) output socket
of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the
back of the monitor.
4. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
English
6 5 4 3 12
External controls
1 & 2 LED Indicator/
Power button
Turns the monitor on/off. Blue indicates power on. Amber
indicates standby/power saving mode.
3 / /
OSD functions/
Down/Right
a. Press to view the OSD.
b. Press this button to select the desired item when in OSD menu.
4 / / Input source
switching/Up/Left
a. Use the INPUT hotkey to enter Input select function.
b. Press this button to select the desired item when in OSD menu.
5
Volume Key Press this button to adjust volume.
Enter Press to enter a selection in the OSD.
6
Empowering Key Press this button to select scenario mode.
Exit When the OSD menu is active, this button will act as the exit key
(exit OSD menu).
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be determined by turning the device off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other
relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with
EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may
be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to
radio and TV reception.
English
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is
granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over it a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
*Acer monitor is purposed for video and visual display of information obtained from electronic devices.


Specyfikacje produktu

Marka: Acer
Kategoria: monitor
Model: EB243YA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acer EB243YA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Acer

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024
Acer

Acer ET322QKA Instrukcja

11 Października 2024
Acer

Acer B278UE Instrukcja

7 Października 2024
Acer

Acer XV272UR3 Instrukcja

7 Października 2024
Acer

Acer CB342CUR Instrukcja

4 Października 2024
Acer

Acer Ferrari F20 Instrukcja

4 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Asus

Asus VP249HR Instrukcja

12 Października 2024
NEC

NEC MD322C8-2 Instrukcja

11 Października 2024
Philips

Philips 243V7QDSWA Instrukcja

11 Października 2024
Samsung

Samsung SyncMaster 940BX Instrukcja

11 Października 2024
Asus

Asus VB178TL Instrukcja

10 Października 2024