Instrukcja obsługi Acer CBA322QU

Acer monitor CBA322QU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer CBA322QU (5 stron) w kategorii monitor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

LCD monitor CB2 series-CBA322QU

USER GUIDE

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances

occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the stand

1. Remove the monitor bracket and base from the packaging and place it on a stable and level workspace.

2. Remove the monitor from the packaging, by aligning the front-end of the bracket with the corresponding

screw holes on the back of the display, Replace the four screws that secure the monitor to the bracket. Tighten

the screws firmly.

3. Attach the footstand to the base. Turn clockwise to lock. Ensure that the base in locked onto the stand.

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin.

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's

power cord.

2. Connect the signal cable to the DP (optional) and/or

HDMI (optional) input socket of the monitor, and the

DP (optional) and/or HDMI (optional) output socket

of the graphics card on the computer. Then tighten

the thumbscrews on the signal cable connector.

3. Connect the USB Cable (Optional)

Connect one end of the USB cable to the USB

terminal of the monitor, and connect the other end

of the USB cable to an appropriate USB port on your

device.

Note: The USB downstream port does not provide

power while the monitor switch is off. USB output:

5V/0.9A

HDMI1 HDMI2 DP

USB

USB Down tream ( BatteryCharge r)

USB Downs tream

USB Downstream

Note: In some circumstances when using USB 3.0 devices (hard drives or flash drives) and 2.4GHz USB

wireless devices(for example wireless mouse, keyboard, or headphone) at the same time, USB 3.0 devices

radio frequency interference may impact on 2.4GHz USB wireless devices, result in a drop in throughput on

the wireless transmission. User may feel delayed response to mouse or keyboard inputs, missing keyboard

characters or mouse commands, decreased operating distance between the 2.4 GHz USB wireless device and

its receiver.

Please refer to the following ways which helps to reduce this radio frequency interference.

1. Wireless dongle was moved away from the USB 3.0 device as possible as you can.

Specyfikacje produktu

Marka:	Acer
Kategoria:	monitor
Model:	CBA322QU
Kolor produktu:	Czarny
Wysokość produktu:	9.5 mm
Wersja Bluetooth:	4.0
Rodzaj baterii:	Wbudowany
Obsługiwane operacyjne systemy komórkowe:	Android,iOS
Wodoodporny:	Tak
Wodoodporny do:	30 m
Przesył danych dot. rytmu serca:	Bluetooth