Instrukcja obsługi Acer BE320QK

Acer monitor BE320QK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer BE320QK (4 stron) w kategorii monitor. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the MiniDP-MiniDP and/or MHL (optional)
and /or DP (optional) and/or HDMI (optional) input socket of the
monitor, and the MiniDP-MiniDP and/or MHL (optional) and/or DP
(optional) and/or HDMI (optional) output socket of the graphics card
on the computer. Then tighten the thumbscrews on the signal cable
connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
FreeSync (HDMI/DP):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
1
2
3
4
5
English
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates
standby/ power saving mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom
color settings to the factory defaults.
3 Function key
/
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select
select scenario mode or game mode .
4 Function key
/
X
a. Press to view Main page.Press again to enter Input select
function.
b. When the Function Menu is active, this button will quit the OSD.
5 Function key
/
a. Press to view Main page.Press again to enter next function in
the Function Menu.
b. The single toggle button on the backside of the Display bezel
operates like a joystick. To move the cursor, simply toggle the
button in four directions. Press the button to select desired option.
Green indicates operable. Grey indicates inoperable.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limitsmay beattached to this equipment.Operationwith non-certiedperipherals islikelyto resultin
interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority,
which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
English
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information ab ut where you can drop off your
wasteequipmentfor recycling,pleasecontactyourlocalcityofce,yourhousehold
waste disposal service or the shop where you purchased the product.
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size 31.5"W (80cm)
Pixel pitch 0.06053mm(H) x 0.18159mm(V)
Brightness 350cd/m2(Typical)
Contrast 100,000,000:1Max. (ACM)
Viewable angle 178° (H) 178° (V) (CR
10) (Typical)
Response time 4ms (G to G,Typical)
Panel Type In-Plane Switching
Video Digital interface
H-Frequency 30~160KHz (HDMI&MHL), 160~160KHz(DP)
V-Frequency 40~75Hz(HDMI), 40~60Hz(DP), 50~75Hz(MHL)
Display Colors 1.07Billion Colors
Dot Clock 600MHz
Max. Resolution 3840x2160@60Hz
Plug & Play VESA DDCCI/DDC2B
EnergyEfciencyClass A
*Annual Energy Consumption 110 (kWh) (for HDMI-input Model)
Power consumption
@200cd/m2
ON Mode 41W(typ.)
Sleep Mode 0.45W(typ.)
Off Mode 0.35W(typ.)
Input Connector
MHL (Only MHL Model)
HDMI (Only HDMI Model)
DP (Only DP-Input Model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal
DP signal (Only DP Model)
MHL signal (Only MHL Model)
HDMI signal (Only HDMI-Input Model)(Optional)
Speakers 2W x 2
Audio Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
Maximum Screen Size Horizontal:697mm
Vertical:392mm
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
Dimensions 715(W) x 478~593(H) x 229(D)mm
Weight (N. W.) 10.2kg Unit (net)


Specyfikacje produktu

Marka: Acer
Kategoria: monitor
Model: BE320QK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acer BE320QK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Acer

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024
Acer

Acer ET322QKA Instrukcja

11 Października 2024
Acer

Acer B278UE Instrukcja

7 Października 2024
Acer

Acer XV272UR3 Instrukcja

7 Października 2024
Acer

Acer CB342CUR Instrukcja

4 Października 2024
Acer

Acer Ferrari F20 Instrukcja

4 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Asus

Asus VP249HR Instrukcja

12 Października 2024
NEC

NEC MD322C8-2 Instrukcja

11 Października 2024
Philips

Philips 243V7QDSWA Instrukcja

11 Października 2024
Samsung

Samsung SyncMaster 940BX Instrukcja

11 Października 2024
Asus

Asus VB178TL Instrukcja

10 Października 2024