Instrukcja obsługi Acer AC713

Acer monitor AC713

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acer AC713 (13 stron) w kategorii monitor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
41A749-786-1A 英文 1
Before operating the monitor please read this manual thoroughly. This
manual should be retained for future reference.
Contents
Packing list ------------------------------------------------------ 1
Precautions ------------------------------------------------------ 2
Installation Instructions -------------------------------------- 3
Swivel Base ---------------------------------------------------- 3
Power cord --------------------------------------------------- 3
Video cable --------------------------------------------------- 4
Operating Instructions --------------------------------------- 5
General Instructions --------------------------------------- 5
Front panel control ----------------------------------------- 6
How to adjust a setting ------------------------------------ 6
Adjusting the picture --------------------------------------- 7-8
Plug and play --------------------------------------------------- 9
Technical Support (FAQ) ------------------------------------ 10
Appendix A – Specifications --------------------------------- 11-12
Appendix B – Factory Preset Timing Table -------------- 13
PACKING LIST
The product package should include the following items:
1. Monitor
2. Owner's Manual
3. Power Cord
4. Swivel Base
41A749-786-1A 英文 2
PRECAUTIONS
z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.
z Do not place the monitor on an unstable cart, stand, or table. If the
monitor falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer or
sold with the monitor. If you mount the monitor on a wall or shelf, use a
mounting kit approved by the manufacturer and follow the kit
instructions.
z Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it
from overheating, be sure these openings are not blocked or covered. Do
not place the monitor on a bed, sofa, rug, or similar surface. Do not place
the monitor near or over a radiator or heat register. Do not place the
monitor in a bookcase or cabinet unless proper ventilation is provided.
z The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
z The monitor is equipped with a three-pronged grounded plug, a plug with
a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the three-
wire plug, have an electrician install the correct outlet, or use an adapter
to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
z Unplug the unit during a lightning storm or when it will not be used for
long periods of time. This will protect the monitor from damage due to
power surges.
z Do not overload power strips and extension cords. Overloading can result
in fire or electric shock.
z Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
z Do not attempt to service the monitor yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
z To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240 VAC, Min. 2.5A.
z The wall socket shall be installed near the equipment and shall be easily
accessible.
INSTALLATION INSTRUCTIONS
Swivel Base
To attach the swivel base to the monitor, do the following:
Carefully turn the monitor on its side or upside down. ( see figure 1 )
Locate the cavities at the bottom front of the monitor.
Insert the pegs on the swivel base into these cavities. Push the swivel base
forward until the swivel base locks in place.
To remove the swivel base, hold the bottom of the swivel base, then push
it out.
Install Remove
Figure 1 Installing and Removing the Swivel Base
Power Cord
Power Source:
1. Make sure the power cord is the correct type that required in your area.
2. This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )
3. Connect the power cord into your monitor’s power input socket, and then
plug the other end into a 3-pin AC power outlet. The power cord may
be connected to either a wall power outlet or the power outlet socket on
your PC, depending on the type of power cord supplied with your
monitor.
41A749-786-1A 英文 3


Specyfikacje produktu

Marka: Acer
Kategoria: monitor
Model: AC713

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acer AC713, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Acer

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Acer

Acer V193L Instrukcja

13 Stycznia 2025
Acer

Acer SB270 Instrukcja

12 Stycznia 2025
Acer

Acer AL2021 Instrukcja

30 Grudnia 2025
Acer

Acer VVA241Y Instrukcja

30 Grudnia 2025
Acer

Acer ED320QRP3 Instrukcja

7 Grudnia 2024
Acer

Acer K252HQL Instrukcja

5 Grudnia 2024
Acer

Acer ED270X Instrukcja

5 Grudnia 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-V Instrukcja

14 Stycznia 2025