Instrukcja obsługi 3M X90


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla 3M X90 (39 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/39
1
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the all user's manual for this
projector.
• Before using the network functions, read the all user's manual
for this projector carefully to ensure your projector is set up correctly.
After reading, keep the manuals in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Contents
Network Functions .................................................................. 2
Settings ................................................................................... 6
Projector Control ................................................................... 22
Failure & Warning Alerts via E-mail ...................................... 26
Projector Management via SNMP .......................................... 28
Controlling the Projector via Scheduling .............................. 29
e-SHOT(Still Image Transfer) Display ................................... 32
Command Control via the Network ....................................... 34
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
• Netscape is a registered trademark of Netscape Communications Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
All other trademarks are the properties of their respective owners.
X90w
Multimedia Projector
Network Functions
© 3M 2007. All Rights Reserved.
2
Network Functions
Network Functions
Conguring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
( )4
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specied e-mail addresses when
the projector requires maintenance or has encountered an error.
( )26
Projector Management via SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specied PC.
( )28
Controlling the Projector via Scheduling
You can schedule the projector to perform various functions according to the
DATE and TIME.
( )29
Still Image Transfer
The projector can display still images that are transferred via the network.
( )32
Projector Control via RS-232C via the Network
The projector can be controlled using RS-232C commands over a network.
( )34
This projector is equipped with the following network functions.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.
3
Network Functions
Before using the network functions…
To use the network functions of this projector, the projector must be congured to
suit your network. Consult with your network administrator before connecting the
projector to your network. Incorrect network conguration of this projector may
cause problems on your network.
Connect to the Gateway (The router/PC that forwards trafc to a destination
outside of the subnet of the transmitting device) from the network terminal on the
projector using a CAT-5 (or greater) cable and congure the following settings.
If using a network with DHCP enabled:
The projectors network settings can be congured automatically. when [DHCP] on
the network menu is set to [TURN ON]. Please refer to DHCP in network menu. (
Operator's Guide : NETWORK Menu) If a xed / static IP address is required, please
congure your projector according to the steps in the following section.
If using a network system that does not have DHCP enabled or if
using a xed IP address on a network system equipped with DHCP
enabled:
Congure the following settings on the network menu.
( ) Operator's Guide : NETWORK Menu
1. [DHCP] [DHCP] [TURN OFF]: Disable DHCP (Set to ).
2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect
to your network.
3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to
connect to your network.
4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that
forwards trafc to a destination outside of the subnet of the transmitting
device) address for the projector to connect to your network.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.


Specyfikacje produktu

Marka: 3M
Kategoria: Projektor
Model: X90

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z 3M X90, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor 3M

3M

3M X36i Instrukcja

11 Października 2024
3M

3M WX20 Instrukcja

3 Października 2024
3M

3M 1895M Instrukcja

19 Września 2024
3M

3M MPro110 Instrukcja

13 Września 2024
3M

3M MP8620 Instrukcja

7 Września 2024
3M

3M MP7640 Instrukcja

6 Września 2024
3M

3M MP7760 Instrukcja

5 Września 2024
3M

3M DX70i Instrukcja

5 Września 2024
3M

3M MP8660 Instrukcja

4 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X1329 Instrukcja

15 Stycznia 2025
Acer

Acer P1165P Instrukcja

13 Stycznia 2025
Hitachi

Hitachi CP-X4011N Instrukcja

12 Stycznia 2025
NEC

NEC NC2043ML Instrukcja

12 Stycznia 2025
Viewsonic

Viewsonic V149-4K Instrukcja

11 Stycznia 2025
Acer

Acer AX600 Instrukcja

9 Stycznia 2025
Acer

Acer Q59X Instrukcja

9 Stycznia 2025